Used Almi Al 33 for sale (14)

Condition: new, plate thickness max. 5.0 mm Guedpfx Aasxaardjbsh tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm Gusdpfxst Stfhe Aabjh - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Condition: new, Year of construction: 2024, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Gujdpfx Aaow N N Eysbjh Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Gedpjxaadmsfx Aabjuh This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° Gjdpfx Aajt Uzxnsbsuh - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Condition: new, Year of construction: 2024, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Guedpfx Ajw N N Etsaboh Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: good (used), Year of construction: 1996, Offer 24337 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW Gsdpfxsvbfh Re Aabeuh - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - various contact rollers

Condition: new, Year of construction: 2024, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters Gujdpfx Aow N N Emeabsh diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: new, Year of construction: 2024, Motor: 4 kW Gusdsw N N Egopfx Aabsh Voltage: 230V 3F, 400V 3F or 460V 3F Belt speed: 45 m/s, 4300 r/p Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation 2-in-1 pipe grinder The new AL150HS has a belt speed of 45 m/s thanks to its unique gearbox. If you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150HS from ALMI can be used to process square, rectangular and round pipes with different wall thicknesses and in all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. Sanding at high speed Thanks to new developments, ALMI has been able to achieve a sanding speed of 45 m/s with the renewed AL150HS. This gives the sanding belt a longer service life, as the faster sanding means there is less heat in the material, resulting in less discoloration and fine dust.

Condition: new, Year of construction: 2024, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two hand wheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. 2-in-1 pipe grinder The AL150 is equipped with a deburring table with which the pipes can be easily deburred, making the pipe grinder multifunctional. Gujdpfx Aaew N N Eaobeh

Condition: new, neu ca. 2 Wochen ab Auftragse Niederlande 4417 € 100 x 2.000 mm 20 - 76,1 mm 1 Gusdpfx Aajwir Dmsbeh 1 3 kW 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm

Condition: new, Year of construction: 2025, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Advantage: Quick and easy notching Guodpfow N N Inex Aaboh Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Easy to operate With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 7168 € 138.34 € 1 150 x 2.000 mm 20 - 114,3 mm Gsdpfx Aswirqteabouh 1 1 4 kW 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm (sample photo)

Condition: used, Year of construction: 2019, gebraucht Gjdpowiqwlofx Aabeuh 2019 5505 prompt, Zwischenverkauf v Niederlande 2670 € 1 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm