Used Notching for sale (364)

Year of construction: 2026, condition: new, New notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades. Machine in stock Specification: - Machine totally enclosed - Cylinder stroke 825 mm - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Digital Display on fence for profile tilting - Nr. 1 Analogical counter on working surface height - Nr. 1 Vertical TCT saw blade Ø 550 mm - Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides Hsdpsd Nh S Njfx Aa Ssff - Air filter - Service spanners

Year of construction: 2018, condition: used, functionality: fully functional, Notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades Year: 2018 Hfjdjyy Rc Aspfx Aa Sof Condition: excellent, like new Technical specification: - Machine totally enclosed - Cylinder stroke 825 mm - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Analogical counter on working surface height - New Nr. 1 Vertical TCT saw blade Ø 550 mm - New Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides - Air filter - Service spanners

Condition: excellent (used), Year of construction: 1997, VA 200/6 K Notching and Punching Machine Indumasch VA 200/6 K Notching and Punching Machine 2 in 1 Manufacturer: Indumasch Model: VA206/K or DAV206 Hfjdpfx Aex Dtrfsa Sef Year of manufacture: 1997 Hydraulic drive 5.5 kW Stroke adjustment: electric, with digital display Worktable (width x depth): 1,000 x 1,620 mm Net weight: 1,500 kg Workpiece holder: standard 2-in-1 – all advantages in a single machine from INDUMASCH! The first station offers stepless, angle-adjustable notching options from 30° to 140°. Additionally, a second station is located at the rear of the machine for operations such as pressing, punching, bending, cutting, and more. This model is ideally suited as a compact machine center for small-batch production and/or prototype construction. Advantages of the first station: – Automatic cutting gap adjustment – High-precision measuring tapes with five reading functions – Internal stop for cutting sheet strips to length – Clean cuts, seamless beyond the length of the blades – Cutting head steplessly adjustable from 30° to 140° – Blade length: 200 mm – Cutting capacity in mild steel: max. 6 mm – Cutting capacity in stainless steel: max. 4 mm Advantages of the second station: – Digital stroke adjustment – Quick-change tooling system for punching – Clear, well-organized worktable – Pressing force: 20 t – Throat depth: 300 mm – Maximum punching diameter: 90 mm Indumasch_Notching Machines Brochure

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 17100 € 328.32 € 200 mm 4 - 6 mm 2 - 3 mm 30 1/min 30 - 140 ° 4 kW 900 mm 1150 mm 1240 mm 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap Hfjdpfewiq Tgjx Aa Sjf 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V Hedsg Ip Efopfx Aa Sjff total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: excellent (used), Year of construction: 2001, plate thickness 6 mm pressure 3 kW blade length 200 mm table dimension - longitudinal 1000 mm Hfodpfx Aasyx Itio Ssf table dimension - cross 860 mm stroke of worktool slide 60 Hub/min angle adjustable from - to 30 - 140 Grad total power requirement 3 kW weight of the machine ca. 1050 kg dimensions of the machine ca. 1000 x 1300 x 1350 mm

Condition: good (used), Year of construction: 1990, blade length 200 x 200 mm max. sheet thickness: Normal steel 4 mm VA 3 mm variable notching angle 30 - 135 drive power 4 kW dimensions L x W x H 1700 x 1000 x 1500 mm Weight 940 kg Accessories / special features: - Cutting depth limitation via potentiometer with digital display - Variable angle of deflection 30 - 135°. - Clean cuts, even beyond the blade length without any start-up - Hydraulic clamping of the knives for angle adjustment - Large work table with scale and T-slots - Electric foot switch incl. 1 set of new upper knives 30 - 135°, newly mounted and adjusted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Hedpfjdut Skex Aa Sjff

Condition: used, Year of construction: 1991, pressure 4 t throat 200 mm stroke 9,5 mm Hsdpfsyx Ikbex Aa Seff no. of strokes 280 - 1400 /min distance table/ram, max. stroke up, adjustment up 215 mm table surface area 320 x 160 mm Table height above floor 940 mm ram surface 140 x 75 mm ram adjustment 20 mm diameter of blanks - 600 mm no. of flutes 6 - 120 material thickness 1,0 mm distance between mid parts spindle and mid ram 15 - 250 mm power requirement 3,0 kW Weight 4,30 kg dimensions of the machine (WxDxH) 1,2 x 2,2 x 2,0 m with infinitely variable drive (Stöber), pneumatic clutch-brake combination (Ortlinghaus), manual ram adjustment, pneumatic clamping of the blanks, automatic stripping device, manually adjustable table plate, manual adjustment of the punching radius, fully automated centralized oil lubrication, noise cancelling cabinet

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Hfjdpfx Aewfymnja Ssf Used machine in very good condition Refurbished Built in 2000

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Hedpfeyfhvpsx Aa Sjff Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Hedpfx Aajyz T A Uj Seff Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 4955 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm Hfjdpfeyui S Rox Aa Sjf 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu Hfodpfeyui Sqsx Aa Sef ca. 2 - 4 Wochen ab Auftr Niederlande 5760 € 111.17 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Hfsdpfxsyz S Tro Aa Sef Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: used, Year of construction: 1989, plate thickness 4 mm cutting angle adjustment 30-120 ° table height 900 mm 407 weight of the machine ca. 760 kg dimensions of the machine ca. 1300x1000x1150 mm Hfsdpfx Aeyv N Hlja Sof

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm throat 300 mm table height 900 mm work stroke max. 40 mm no. of strokes max. 40 Hub/min Hfodpfx Aaoyv Nz As Sjf total power requirement 4 kW weight of the machine ca. 2.000 kg dimensions of the machine ca. 1500x1300x1400 mm

Condition: used, Year of construction: 1987, plate thickness 4 mm Hjdsyv Ntxepfx Aa Sjff blade length 150 mm cutting angle 30-120 ° Table dimensions 1000x650 mm

Condition: good (used), functionality: fully functional, Year of construction: 1995, Used Boschert notching machine Type: LB 12 K 4 Capacity: 120 x 120 x 4 mm Hfodpeywvwyofx Aa Sof Fixed angle: 90 degrees Year of manufacture: 1995

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 810, sheet thickness (max.): 4 mm, overall weight: 550 kg, working length: 200 mm, TECHNICAL DETAILS Hfedpfx Aeywg Nmea Ssf Sheet thickness: 4 mm Sheet length: 200 mm MACHINE DETAILS Total power requirement: 3 kW Dimensions & Weight Space requirement: approx. 1.0 x 0.8 x 1.0 m Machine weight: approx. 550 kg

Condition: good (used), functionality: fully functional, Station 1: Angle adjustment from 30° - 120° Cutting length 150 mm Station 2: Notching 100 x 20 mm Hfsdpsyzca Nefx Aa Sjf

Condition: good (used), Gebruikte inkepingmachine van Euromac Type: 250 4 s Capaciteit: 250 x 250 x 4 mm Hjdoywg S Ijpfx Aa Seff

Condition: used, Year of construction: 1995, Gebruikte inkepingmachine van FIM (merk Amada) Type: Goal 204 Capaciteit: 200 x 200 x 4 mm 90 graden hoek Hodpfx Aeywgupsa Soff Bouwjaar: 1995

Condition: new, neu Hedpfx Aajyq Svde Sjff ca. 2 - 4 Wochen ab Auftr Niederlande 788 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Hsdoyq Su Tjpfx Aa Ssff Niederlande 1032 € 1 1/4" 42,4, 1 1/2" 48,3 mm 3 mm 2.5 mm 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 951 € 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. Hfsdpfx Aaeyq Su He Sef ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.