Used Aluminium Packaging for sale (13,787)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT Fgsdpfow Ryt Djx Agfja - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 The machine is in very good condition and ready for operation. - Maximum package width: 270 mm - Minimum package width: 50 mm Fgsdpfxsyw Ud Se Agfea - Maximum package length: 350 mm - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, total height: 2,050 mm, total width: 1,930 mm, total length: 2,600 mm, type of input current: DC, overall weight: 1,050 kg, power of the servo motor: 3,500 W, film width: 500 mm, input voltage: 230 V, product height (min.): 10 mm, product height (max.): 250 mm, product width (max.): 450 mm, product length (min.): 100 mm, product width (min.): 10 mm, product length (max.): 650 mm, air demand: 0.5 m³/h, Equipment: compressor, Packer Plus P400 Parcel Packing Machine, manufactured in 2025, is designed for automatic packing of parcels into plastic mailers, simultaneous sealing, and application of address labels. The machine is ideally suited for logistics centers, online stores, and dispatch warehouses. Model: Packer Plus P400 Year of manufacture: 2025 Throughput: approx. 600 parcels/hour Packing method: plastic film + heat sealing Automatic address label application Condition: Very good / like new Included in the scope of delivery: - Computer with monitor - Compressor required for machine operation The machine is ready for immediate use, significantly speeds up the packing process, and reduces manual handling costs. Integrated functions performed by the machine: - Scanning - Packing - Label printing - Label application Supported product dimensions: Length: 100–650 mm Width: 10–450 mm Height: 10–250 mm Maximum speed: up to 1,200 parcels per hour Typical working speed: 700–850 parcels per hour Label dimensions: Fjdsyx Ebqepfx Agfoga Length: 60–180 mm Width: 70–100 mm Printer: Zebra ZE500 industrial printer, supporting both direct thermal and thermal transfer printing. Components: PLC controller: Siemens Sensors: Omron Safety components: Schneider, Sick, Eaton Integrated computer system for machine operation Communication interfaces: Ethernet, USB, RS232 Power supply: 230 V Power consumption: 3,500 W Working pressure: 0.8–1.0 MPa Air consumption: 0.5 m³/min Overall dimensions: 2,600 × 1,930 × 2,050 mm Weight: 1,050 kg

Condition: used, Year of construction: 2022, Cartoner including hot melt applicator. This device has a low operating hour count. It is particularly suitable for products that can be fed into the carton from the side. Fgjdpfx Agsvb E Evofja

Condition: new, Year of construction: 2023, operating hours: 10 h, !! We would be happy to advise you!! Model name ////: Rotection cartoner Features ////: Double servo feed control, with hot melt station, safety enclosure and safety technology Production orientation ////: Horizontal Fgedpfx Ager E Dpajfoa Conveyor system ////: Fan conveyor belt Carton feed ////: top with active conveyor belt Operator display ////: Touchscreen Drives & control ////: 8 servo motors and PLC control Box length ////: 150-300 mm Box width ////: 120-260 mm Packaging height ////: 50-100 mm Speed ////: 40-60 boxes/min. depending on box size and product weight Recommended cardboard box ////: pre-folded boxes, 250-350g/m³ Consumption ////: approx. 9.5KW Power supply ////: 380 V / 50 Hz/ 3-phase System weight ////: approx. 1000 kg System dimensions ////: approx. 4257 x 1605 x 1823 mm System material ////: "304 stainless steel with surface treatment" Hot melt station ////: Required, optional Nordson or Robatech

Condition: excellent (used), Year of construction: 2008, Model: EM6-50MT Year of manufacture: 2008 Fodpfx Asxqm Nksgfoga Serial number: 58060 Dimensions: 600 x 300 x 550 Corrugated cardboard cutting machine with cutting and winding tools, unwinder, work table, control cabinet, and operator terminal.

Condition: used, Screw packer for bags and cartons, weighing from 5 to 30 kg. Capacity ranges from 3300 kg (carton) to 5200 kg (bag) per hour. Used machine. Fgjdpex Nhd Ajfx Agfja

Year of construction: 2014, condition: good (used), Used SEALPAC RE25 Thermoforming Packaging Machine (MAP/Vacuum) This SEALPAC RE25 thermoforming machine is a high-quality, industrial-grade packaging system designed for continuous operation in food production environments. Built in the Netherlands, SEALPAC machines are known for their durability, hygiene, and consistent sealing performance. This unit is in good used condition Technical Overview Model: RE25 Power: 3-phase (230/400V, 50–60 Hz) Power consumption: ~17 kW Compressed air: 6–7 bar Gas (MAP): 4–6 bar Film width: approx. 300–650 mm Max forming depth: up to 160 mm Machine length: approx. 8 m. Fedpoyvr Irofx Agfega Contact Us Get in touch for: Price Inspection Additional details or videos

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering this very well-maintained Sparck Technologies HM 4455-30 carton packaging machine, year of manufacture 2022. Manufacturer: Sparck Technologies Model: HM 4455-30 Year: 2022 Condition: Excellent Machine type: Carton packaging machine If you have any questions or need more information, feel free to send us a message or give us a call. Fgjdpjyzg Dlsfx Agfja 💰 Asking price: €900,000 (original purchase price: €1,600,000) 🔧 Key Highlights: ✅ Fully automated packaging, tailored to product size ✅ High throughput (1,000 packages per hour) – ideal for e-commerce and fulfillment centers ✅ Efficient, material-saving, and scalable ✅ Excellent condition, professionally maintained 📦 The machine is ready for immediate use and was in live production until recently – perfect for businesses aiming to optimize their shipping operations, minimize packaging waste, and lower labor costs. 💡 Why are we selling? We are restructuring our logistics and moving to a new setup – this advanced system deserves to keep running, not remain idle. 📩 Interested or have questions? We are happy to provide detailed specifications, photos, or arrange an on-site viewing. #packagingautomation #sparck #cvpimpack #logistics #ecommerce #machinery

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Fsdpfxetw Sk Uj Agfsga Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The sales price does not include (seaworthy) packaging, which is available for a deposit. The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function. Test printouts are shown. Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! A deposit of €15,000 is charged for the packaging. This fee will be refunded upon return. For further information you can of course contact us personally.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 38,907 h, functionality: fully functional, machine/vehicle number: 256, type of input current: three-phase, For sale: ILLIG HSA 50 RD blister machine, manufactured in 1989. This is a high-performance through-feed blister sealing machine with a carton feeder, film thickness: 150µm-600µm. The line is sold including a thermoforming station (currently disconnected as we have not used it). Speed: 5-18 cycles/min. For reference, lipstick blistering output is approximately 16,000 packs/8 hours. Dimensions (without forming station): 465x115 cm + 68 cm unloading station (currently dismantled). Maximum sealing area per tray: 50x30 cm. Maximum tray size: 57x35 cm. The machine is 100% fully operational and in continuous production. Inspection prior to purchase possible. POLAND. Fgodpfx Ageywhxcofja

Condition: good (used), axle configuration: 3 axles, first registration: 01/2001, suspension: air, color: white, Year of construction: 2001, Equipment: ABS, Make axles: Mercedes-Benz Empty weight: 4.670 kg Carrying capacity: 34.330 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Fedoyc E Dropfx Agfjga = Additional options and accessories = - Air suspension - Disc brakes - Hardwood floor - MB axles

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm Fodpfsyu U Dfex Agfjga capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: CCW-RV-214W-1S/05-SS, Automatic FARMALINE packaging line with exceptionally precise dosing systems for liquids or dry products, interconnected by a shared module for labeling and packaging. The entire process line is integrated via a single transport system, enabling alternate modes of operation. Pharmaceutical-grade finish – all components in contact with the product are manufactured from materials approved for the pharmaceutical industry (e.g., AISI 316L, PTFE), ensuring easy cleaning. 100% in-process control using a detection and reject system at every production stage to remove defective items. Integrated production management system (3 access levels, production orders, operating parameters, process reporting). Operating speed in both modes: 25 packages/minute. Key features: Liquid dosing: ✓ Working range and accuracy: 2–20 ml ±1% ✓ Automatic container (bottle) feeding using cobot system ✓ Clean compressed air bottle rinsing system before filling ✓ Weight measurement of the container (bottle) before and after liquid dosing ✓ Dosing using 4 piston pumps ✓ Drip elimination system after dosing process ✓ Rejection of incorrectly dosed products ✓ Automatic bottle capping with torque and pipette presence control (if required) Powder product dosing: ✓ Working range and accuracy: 1–100 g ±1% ✓ Automatic container (jar) feeding via conveyor with separator ✓ Combination weigher with high-precision dosing system (accuracy: 0.025 g/weigh cell) depending on target dose ✓ Checkweigher with reject system for out-of-spec products ✓ Automatic jar closing with torque control ✓ Container sealing using induction liner sealing inside jar lids ✓ Weighing mode and bypass mode for liquid dosing operation Shared module – labeling: ✓ Container feeding on conveyor with separator ✓ Label printing with OCR print verification ✓ Label application on containers (bottles and jars) with presence control ✓ Reject line for products without labels or with incorrect imprint ✓ Accumulation table for packaging operations, dimensions: 220 cm x 100 cm The packaging line may be supplied with or without the combination weigher. Automatic combination weigher for dry product dosing. Top loading and subsequent portioning via 14 weighing cells, in which the system selects the cell combination that best matches the target product weight per cycle. Fjdjywk Dnopfx Agfsga Exceptional accuracy due to precise weighing cells (single cell error: ±0.025 g). Key features: ✓ Working range and accuracy: 1–100 g ±1% ✓ Operating speed: 25 cycles/minute ✓ High-precision feeding system, accuracy: ±0.025 g/weigh cell ✓ Maximum single portion error: ±0.1 g (by combining up to 4 weigh cells to achieve the target portion) ✓ HMI touchscreen control panel, 3 access levels ✓ Ability to create product programs with preset operating parameters ✓ Production reports for each batch ✓ Integration capability with upstream machinery or conveyor via control signal exchange ✓ All parts in direct contact with the product are easily removable

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Fgodpfxeyyplce Agfea

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, For sale: Industrial, fully automated cross-cut saw for trimming packages of lumber and structural components — a complete processing line for formatting bundles to a specified length. The machine is designed for use in sawmills and timber structure manufacturing plants, where process efficiency, precise length repeatability, and bundle stabilization during cutting are critical. The machine is available immediately — inspection and testing possible. Working parameters: • Max. bundle size: 1300 × 1300 mm (width / height) • Max. input bundle length: 6000 mm • Max. cutting length: 3000 mm • Min. cutting length: 600 mm • Max. bundle weight: 8000 kg • Cutting accuracy: ±2 mm The minimum bundle cross-section is determined by the extreme positions of the hydraulic clamps — cutting of smaller bundles is permissible. Cutting module: • Main motor: 11 kW Fgodpfx Asxn Rt Ujgfoa • HIWIN heavy-duty linear guides • GB TITANIUM guide bar + STIHL chain • Automatic lubrication system for the guide bar The robust construction of the cutting unit ensures operational stability and precise cutting length repeatability. Bundle stabilization: • 6-point hydraulic clamping system (top + side + before and after the cutting line) • Bundle alignment to vertical rollers • Elimination of bundle movement as the saw enters Process automation: • Intelligent bundle strapping system • Automatic determination of strapping points • Possibility of automatic base cutting • Discharge buffer for cut bundles Conveying and handling: • Cross infeed conveyor • Cross outfeed conveyor • Automatic discharge of bundles after cutting Waste removal: • Belt waste conveyor (~10 m) • Hydraulic tilt rollers in the cutting module (prevents jamming of large waste pieces) Automation: • Siemens PLC controller • Yaskawa servodrive and inverters • 21–22” operator panel • Remote service and diagnostics Additionally: • Winter package — control system heating • Delivery to customer — included • Installation — included • Commissioning — included • Operator training — included The machine is available immediately.

Condition: ready for operation (used), Italdibipack Semi-Automatic Shrink Wrapping Machine + Shrink Tunnel Complete shrink packaging line – ready for immediate use! High-quality Italian Italdibipack shrink wrapping line consisting of a semi-automatic shrink wrapping machine and a separate heat shrink tunnel. This reliable packaging system is ideal for packaging products such as boxes, printed materials, food products, cosmetics, hardware, and many other retail or industrial items. The machines are currently mounted on euro pallets and ready for immediate pickup. Main features: • Manufacturer: Italdibipack (Italy) • Semi-automatic shrink wrapping machine • Separate heat shrink tunnel • Complete packaging line • Reliable industrial construction • Easy to operate control panels • Suitable for many product types • Immediate availability Technical details: Shrink tunnel: • Tunnel opening height: 150 mm • Conveyor width: 330 mm • Conveyor type: rotating belt • Power supply: 3-phase Wrapping machine: • Semi-automatic operation • Power supply: single phase Condition: The machines are in good used condition and were previously used in production. They are being sold due to closure of the previous operating location. Both units are already placed on euro pallets, making loading and transport easy. Delivery:• Immediate pickup available • Machines are ready for transport • Located in Finland Perfect for: • Contract packaging companies • Food producers • Printing houses • E-commerce packaging • Small and medium manufacturing Contact: Please contact for additional information, pictures or transport arrangements. Machine can be demonstrated powered on before loading. Price negotiable for quick deal. Fgedpfxjywn Nbj Agfsa Keywords: Italdibipack, shrink wrapping machine, shrink tunnel, shrink wrapper, heat shrink tunnel, L sealer, semi automatic shrink wrapper, packaging machine, Smipack shrink wrapper - used shrink wrapping machine for sale - Italdibipack shrink wrapper - shrink tunnel packaging machine - Smipack - Minipack Torre.

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Fodpfx Asyctvcegfoga Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Fgjdpeyylugsfx Agfea Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 200 mm, type of input current: AC, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished Mahr Multiscope 662 (factory acceptance before delivery) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Fgjdpfx Asu Dw T Uogfoa Includes the latest software update für windows 10 (Windows 11 and OptiCheck2025 optionally available) free lifetime software hotline, and user support. Optional delivery with factory service or shipping, worldwide. Online or on-site demonstrations available with customer parts, and application consulting by accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and extensive acceptance documentation. Individual training and educational programs also available as online courses. Rental, hire purchase, or financing directly through Profitech without a financial institution. Measuring device customizable to customer needs. Multisensor measuring device equipped with a camera, laser, and Renishaw probing system. Measuring range for all sensors: 600x600x200mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base) Max. load capacity: Glass plate 40kg Accuracy: U1=2.4 + L/150; U2=3.2 + L/125; U3=3.9 + L/100 (L= measuring length in mm) Max. travel speed: 250mm/s Including 2-step zoom camera Including laser Including LED ring light Including Renishaw TP200 probing system Including frame grabber (Eagle) Including Windows 10 Including new Optichek 3D 5.0 evaluation software Including Renishaw TP200 probing system During optional commissioning and calibration, the measuring device can be programmed for customer-specific parts so that you can immediately run your measurement programs even before any required training.

Condition: not inspected (used), 17 pieces Nordson 3500 Multiscan hotmelt glue units suitable for up to 4 hose connections. Acquired from a customer's stock. The units have not been checked by us and are being sold only as a lot, so all 17 at once. Sales condition: As is, where is. Fgodpfxeyddyne Agfoa

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 22000 - 10000, input voltage: 240 V, The machine was purchased in 2019 and has never been used. Only FAT/SAT commissioning has been carried out (no production). Various format parts are available and will, of course, be included in the sale. The machine can be inspected at any time by appointment. Additional photos are available upon request. Serious offers are always welcome. Transport can be arranged by mutual agreement. Fjdpfeyx Sk Eex Agfoga If you have any questions or comments, please feel free to contact us.

Year of construction: 2013, condition: ready for operation (used), MULTIVAC R-275 – SLICKER CD SKIN/MAP – 2013 - YEAR OF MANUFACTURE – 2013 - THE MACHINE WORKED IN SWITZERLAND AND WAS VERY THOROUGHLY SERVICED. Fodjx A Aiqspfx Agfega - IN 2025 – A COMPLETE TECHNICAL INSPECTION WAS PERFORMED BY MULTIVAC SERVICE IN SWITZERLAND. - MACHINE USING RIGID FILM. - PERFECT TECHNICAL CONDITION. - ONE SET OF MOULDS – ANY FURTHER SET UP UPON CUSTOMER REQUEST – ADDITIONAL PRICE FOR THE SET: 9,000 EUR. - THE MACHINE CAN BE VIEWED AT OUR OFFICE.

Year of construction: 2014, condition: new, functionality: fully functional, 2014 MODEL THEEGARTEN-PACTEC BRAND, U1-D-CW TYPE GUM CRUSHING, FOLDING PACKAGING MACHINE. Fjdounkw Tspfx Agfega With panel and other auxiliary units. There are 2 labels on the machine. It is configured for 30.6x12.1x3.9mm single size and the maximum output speed is 2000ad/min; The machine is brand new, not operated and disassembled.

Year of construction: 2016, condition: like new (used), functionality: fully functional, 2016 Tenchi TP-800 Horizontal Folding Packaging Machine. Complete with conveyor, transformer, and auxiliary equipment. The equipment is brand new and has never been used. Supplied disassembled. Fgedpfeuz Ur Ajx Agfsa