Used Shrinking for sale (470)

Condition: like new (used), Year of construction: 2018, Shrink Tunnel Manufacturer: Diez Model: HTC3822 Year of manufacture: 2018 New machine, zero operating hours! Width: 38 cm Infeed height: 22 cm Passage length: 130 cm External dimensions: 130 x 80 x 150 cm Ksdpfxowtfgpo Aabonc

Condition: good (used), Year of construction: 2003, functionality: fully functional, Brand: Kallfass Model: KW 5050 Universal Year: 2003 welding frame dimensions: 500 x 500 mm maximum film roll width: 650 mm Working height: 840 - 950 mm Passage height: 100 - 200 mm Power supply: 230 V three-phase current Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Enclosure dimensions: 1550x1400x950 mm Knodpoha Unysfx Aabsc

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Kjdpfx Asxnzlhjabjnc Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Chamber shrink wrapping machine, packaging machine Minipack Model: Minimini Capacity up to 200 cycles/h. Max film width: 300 mm Connection: 230 V Used machine Visit us! Knedpfjxmq Ucox Aabsc

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinker KC 8060/650 Universal Knedpsxl Dqzefx Aabsc Year of construction: 2014 Dimensions: approx. 3550 x 1350 x 1450 mm (LxWxH) Weight: approx. net 690 kg / gross 790 kg Technical data: Sealing frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase current Easy-to-operate angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with Teflonized cut-off welding wire for absolutely odorless operation. Equipped with locking mechanism as automatic pressure mechanism for precise adherence to the set welding time and for easy for problem-free cut-off welding even of thick films. Viewings and demonstrations are possible on our premises by prior arrangement. Function guarantee, no warranty

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW Knedju Nu Hiopfx Aabsc control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: good (used), Passage width: 370x230mm Belt length: 1200 mm Ksdpfx Aoukd Dloabonc

Condition: as good as new (ex-display), functionality: fully functional, MAILBAG is the automatic vertical packaging machine, ideal for magazines, newsletters, catalogs and publications. The film reel in this machine is mounted on a motorized roll. A folding device bends the film into a closed bag containing the product. At the end of the process, the product is automatically ejected. Really simple! Kedpfx Ajqyduasabsnc

Condition: excellent (used), Year of construction: 2020, Shrink-fit tool with internal cooling Kedpfx Ajv Iyahjabonc Power: 3500 W Tool diameter: 3-32 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200004, nominal power: 30.5 kW (41.47 HP), air demand: 100 m³/h, The DMPack STAREVO1100 IT is in excellent condition, fully serviced, and ready for operation. The machine comes with additional spare parts included. A reliable solution for efficient packaging with a shrink tunnel. Knedpexcah Rsfx Aabec

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Year of manufacture: 2017 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Knodpfxexl Dp De Aabec Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Electrical connection: 400 V three-phase Rated current: 7.2 A This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: new, Year of construction: 2025, Briquetting is a great cost-saving measure for companies. Further improvement of the efficiency and quality of packing pays off. BMD-800B is fit for a wide range of shrink wrapping with single or multi-row products. Automated alignment and placement feature improves the production efficiency and allows for the product to operate 24/7. When paired with UMPT briquette presses & our transportation table, this machine can support up to 4 BPA600A presses and produce up to 5 bags of briquettes per minute. After packaged in high-quality polyethene film the products have a compact and neat appearance which ensures the items’ integrity, the convenience of transportation and resistance to humidity. In contrast, currently widely used pre-made briquette bags have the disadvantage of unnecessary movement of briquettes inside the package which in turn disintegrate during logistics and lose value in the eyes of the end-consumer. Using shrink wrapping tightens the pack making it easier and safer to handle, increases resistance to humidity and even allows briquettes to be stored out in the elements. Stick-on carry handles are optional to provide the ultimate briquette pack. Features: Automated quality control and recycling of rejected briquettes Automated de-dusting Automated alignment and packing Automated leaflet insertion Automated sealing and heat shrinking of packages Automated palletizing and pallet wrapping The system ensures proper briquette dedusting, weighting (optional), alignment, packing and shrinking of the package. Automated sealers ensure a proper seal on each package eliminating the human factor while automated palletizing attachments load and wrap the pallets. Technical data Kodpfx Ajfh R Uzeabjnc Sealing type Sleeve Packing capacity ᐸ5 packs/min Shrinking Tunnel speed Variable, ≤15 m/min Working height 780-850mm Shrinking Tunnel size Depends on the size of the product Sealing knife width 880mm Air pressure ≤0.5MPa (5 bar) Power supply 380V/50-60Hz/Trifazis Rated power consumption ≤30 kW Film type Polyethene (PE) Max film size 850mm (width) x 280mm (outer diameter)

Condition: good (used), Sleevit Shrinkmaster 750 Shrink tunnel Kedpevw Sqqsfx Aabenc Stainless, heat shrink tunnel, adjustable temperature controls, can be supplied with a conveyor if required, 3Ph

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Kodpjq Htfnjfx Aabjnc Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: VD 01.06.012, total length: 4,500 mm, total height: 1,570 mm, total width: 2,400 mm, temperature: 240 °C, Equipment: documentation/manual, KALLFASS Universal 1600 NT shrink tunnel for sale in good, working condition. Manufacturer: KALLFASS GmbH Type: Universal 1600 NT Year of manufacture: 2006 Maximum tunnel passage height: 500 mm Maximum tunnel passage width: 1600 mm Length of heated tunnel hood: 2500 mm Maximum temperature (infinitely adjustable) [°C]: 240 Extended tunnel outlet: 1000 mm Adjustable working height: 830 - 900 mm Product transport: Rod chain conveyor, silicone-coated rods Installed heating capacity (consumption in continuous operation approx. 40%): 60 kVA Rated power / rated current at 400 V: 68 kVA / 98 A (in stand-alone operation) Kodpfx Aswcw Ttoabonc Machine dimensions in mm (length x width x height) Approx.: 4500 x 2400 x 1570 Further information available upon request. Viewings and demonstrations are available at our premises by appointment.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,073 h, functionality: fully functional, total length: 15,000 mm, Equipment: documentation/manual, HUGO BECK 5073 hours SERVO X 10,000 cycles 1 pusher feeder 4 rotary feeders 1 friction feeder Film wrapping system / unwinder 1 90° curve 2-meter conveyor table 1 RIMA cross-stacker OPTION 1 VIDEOJET BX6500 Ksdoxakrzopfx Aabjnc 1 Graftech PC 1 glue unit (mobile) 1 Mosca cross strapping (straight line)

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm Knedpfew U A Eqsx Aabsc - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Tunnel passage width: 650 mm Tunnel passage height: 200 mm Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: new, Year of construction: 2025, Quick option to shrink film packaged briquettes. Operator manually loads briquettes into machine and it packs them into selected thickness film. Does not need an automated transporter system, compact. Two sided seam system is more dust resistant (when compared to airless units which have a very long seam). Has a plate that covers sealing surface from dust during operation. Selectable package width. Can be used for other products (bottles, sugar packets and etc.). Can be purchased with motorised conveyor Ksdetpnwlepfx Aabsnc which returns packages back to operator for better ergonomics. Recommended to be used with 1-3 presses depending on operator capabilities. Specifications: Min cycle time: 8 seconds Installed power: 22kW Length: 3500mm Width: 1500mm Height: 2100mm Weight: 700kg Warranty: 2 years / 1000 workhours

Condition: excellent (used), Saropacker SL 55 Hood Shrink Machine MAIN FEATURES Sealing and shrinking in one process Performance dependent on operator Impulse sealing system and impulse cutting system with Teflon-coated sealing band Sealing band guided by wear-resistant fiberglass insulation strips Air cooling system of the machine housing Height adjustment of the support grid Easily adjustable infeed table for quick adjustment to the product size Raised protective grid at the rear – no more film residue on the heating flap Closing magnet for automatic control of the shrink time – the shrink time can be set on the display Two-lane film perforation device with needle rollers for venting the pack during shrinking Base frame with large storage area on wheels, simple version with feet available Flextron electronic control system on a compact, maintenance-friendly control board » Digital display with 6 storable programs, all programs with Settings: Kjdpfx Aaoxambrjbjnc Sealing only, sealing and shrinking, or delayed shrinking » Delayed hood opening can be defined for energy-saving operation (warm air is not blown out) » Electronic temperature control of the sealing time » Piece counter Model: SL 55 Sealing frame format: 560 x 430 mm Insertion area: 550 x 370 mm Max. product height: 260 mm Hourly output: max. 300 cycles/h Film roll width: max. 600 mm Film roll diameter: max. 250 mm Electromagnet for hood closure Height adjustment of the internal packaging grid Connection voltage: 230 V / 50 Hz / 1 phase Connected load: 3.7 kW Machine weight: 77 kg Machine dimensions: 1240 x 805 x 1102 mm (LxWxH) Paint: RAL 7035 light gray Manufacturer price: €3,150 Documents: Data sheet User manual Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2016, condition: ready for operation (used), Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation. Knedpfx Aasiph Uvsboc

Condition: excellent (used), functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa Kjdpfowcnqcjx Aabenc and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone or mail for price negotiations

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Kjdpfsw E Igvsx Aabjnc Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: ready for operation (used), Year of construction: 2017, A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible. Knodpfx Aaevf Iydebsc

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, Fully automatic flow wrapping machine for packaging products—regardless of their length—in a complete wrap without film overlap. Product infeed is carried out via a conveyor belt, while simultaneously being wrapped in centerfold film using a forming shoulder. Product timing is achieved via a photoelectric sensor. The infeed conveyor can be easily adjusted to accommodate different product widths. Longitudinal sealing is produced by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing and defective parts have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Kjdjw Ddb Topfx Aabsnc Technical data: - Cross sealing bar: 450 mm - Film: centerfold film, approx. 12–80 µm - Max. film roll outer diameter: 400 mm - Max. film roll width: 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Pass-through height: 200 mm - Working height: 780–930 mm - Power supply: 400 Volt three-phase, 50 Hz, with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Inspection and demonstration can be arranged by appointment at our premises. Function guarantee, no warranty.

Condition: ready for operation (used), An ETEC shrink packaging machine for jars and tubes is available. Shrink tunnel width: 650mm, shrink tunnel height: 300mm, outfeed conveyor length: 1000mm. Including banding machine and subsequent cooling fan. On-site inspection is possible. Knedpfx Aev E Rbqeabsc