Used Apk 30 for sale (60,637)

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Lsdeu N Slvspfx Aaboah Max. panel length: 3200 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Hydraulic press brake PPBL 135/30 Year of construction 2000 Machine number 26938 Technical specifications Force 1350kN Working length 3050mm Distance between uprights 2250mm Stroke 110mm Lasdpsw Hca Hefx Aaboh Distance table – ram 310mm Gap 200mm Width table 180mm Approach speed 100mm/s Working speed 8mm/s Return speed 65mm/s weight 6500 kg motor 7.5kW Voltage 3 x 380V Oil-tank 120L Options inlcuded; • Back gauge with 2 fingers • Range of back gauge 600mm • 2 front supports of 300mm • Table with center slot Tooling included with machine; • D10.180.78.20 5x508mm • Multi-V M90 1x3050mm

Year of construction: 1973, condition: ready for operation (used), A complete cut-to-length line (coil line) for sheet metal processing, specifically for coils, is available. Product information: Material: stainless steel strip, max. strength at 2mm thickness: approx. 70kp/mm², max. elongation at 70kp/mm²: 50%, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm, sheet lengths: 250mm/1000mm/4000mm/10000mm, strip speed range: 7.5m-30m/min, hydraulic operating pressure: approx. 80bar, pneumatic operating pressure: approx. 4bar, clarification sheet length: over 250mm: Feed and shear adjustment, over 1000mm: with mechanical intermittent operation, over 4000mm: with electrical on/off operation. 1) Decoiler, max. outer coil diameter: 1400mm, inner coil diameter: 400mm/500mm/600mm, decoiler drum spreading range: 370mm-620mm, spreading cylinder diameter: 125mm, spreading cylinder stroke: 40mm, spreading segment useful width: 600mm, max. strip weight: approx. 3000kp, max. strip tension: approx. 400kp, decoiler displacement: +/-100mm. 2) Kohler straightening machine, straightening roller diameter: 30mm, bale length: approx. 600mm, number of straightening rollers: 21, feed rate: 7.5m-30m/min, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm. 3) Flying hydraulic shears, material/strip thickness/speed: to suit the system, number of cuts: 30 cuts/min, sheet length range: 250mm-1000mm, blade width: 600mm. 4) Conveyor belt, belt width: 600mm, center distance: 3500mm. Documentation available. On-site inspection is possible. Lsdswgngfspfx Aabsah

Condition: used, overall weight: 38,000 kg, maximum load weight: 33,200 kg, axle configuration: 3 axles, first registration: 12/2018, total width: 2,550 mm, total height: 1,750 mm, Equipment: ABS, Container chassis for: 2 x 20' containers, 1 x 20' container (centered), 1 x 30' container, 1 x 40' container, 1 x 40' container with tunnel (locking device height adjustable), extendable rear load support approx. 1,390 mm, ABS, EBS, BPW axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, JOST landing gear, Vehicle may be covered with advertising decals and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Lajdpfx Aajwzfw Rsboh We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand FANUC Model F0i Additional Equipment D6/50 WELDON: 5 pcs D6/60 WELDON: 7 pcs D8/50 WELDON: 2 pcs D8/60 WELDON: 3 pcs D10/50 WELDON: 1 pcs D10/60 WELDON: 4 pcs D12/60 WELDON: 3 pcs D12/100 WELDON: 2 pcs D16/75 WELDON: 3 pcs D22/45 milling arbor: 5 pcs This DN SOLUTIONS VC 3600/30 vertical machining center was manufactured in 2022. It features a Fanuc F0i control unit, Through Spindle Coolant at 20 bar, an Oil skimmer, Tool Load Monitoring, a color signal tower, and a Chip conveyor of the Hinged belt type. Consider the opportunity to buy this DN SOLUTIONS VC 3600/30 vertical machining center. Contact us for more information. Application Types Milling Lajdewpyd Iopfx Aabsh

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Lodpfx Aeh Nx U Njabjah Numerical Control ( CNC) NC 21, Software Homatic Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) Max. useful working width (mm) 3000 Max. useful working tickness (mm) 100 (ca.) Max. depth of the panel (mm) for automatic infeed 1250 Distance between center-axes of the disappearing dogs (mm) 1000 Adjustable (min/max) feeding speed (m/min) 8 - 25 (ca.) No. 4 Working groups (for each machine's side): 1 Jumping Scoring Unit (1 x Kw 1,5 ca.) 1 Hogging Unit (1 x Kw 4,5 ca.) 1 Jumping Milling Unit (1 x Kw 4,5 ca.) 1 Free Space

Condition: used, machine/vehicle number: 006082, Max. panel width: 1300 mm Max. panel length: 3000 mm Rotation system: double cone Ljdjwaymwjpfx Aaboah Rotation direction: from transverse to long

Year of construction: 1978, condition: used, grinding length 600 mm grinding width 300 - 320 mm Electromagnetic clamping plate 500 x 200 mm Important note! There is no hydraulic and no coolant unit included! Lodpfx Ajcwic Ioabeah Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible. Laedpfx Aew Rqw Heabeh

Condition: ready for operation (used), Hydraulic press brake LVD PPEB-EFL 220/30 CADMAN CNC Year of construction 2004 Serial number 28652 Technical specifications Force 2200kN Working length 3050mm Distance between uprights 2600mm Stroke 450mm Distance table – ram 685mm Gap 405mm Approach speed 100mm/s Working speed 9.5mm/s Ledpfewcqpbex Aabeah Return speed 110mm/s weight 16500 kg motor 22kW oil 350L Dimensions according drawing attached CADMAN CNC 2D graphic controller •Easy form laser EFL 130mm – W axe • Table PP8170 V-axe – table width 120mm • Wila hydraulic top tool clamping • LVD bottom tool clamping hydraulic • Back gauge DUO X X’ R Z1 Z2 (X 600mm) • Security; CE PP3580 – lasersafe PP5320

Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery. Technical specifications •Maximum working dimensions: 3000 × 1700 mm •Stroke of vertical cylinders: 800 mm •Stroke of horizontal cylinders: 1200 mm •Adjustable lower beam: can be set in three positions •Hydraulic cylinders: •2 vertical (Ø 100/60 mm) •2 horizontal for setting frames (Ø 50/35 mm) •Power of hydraulic unit: 2.2 kW •Overall dimensions: 3600 × 1000 × 2650 mm •Weight: approx. 1200 kg Application Italpresse Program/30 is ideal for: •Gluing and assembling window and door frames •Assembling furniture bodies Lsdpfx Aewkf Stsaboah •Assembling wooden panels and other construction joinery elements

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + Lajdpfjhbyr Sox Aaboh 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), color: blue, Year of construction: 2005, Year of manufacture: 2005 Dimensions (L x W): 235 x 200 cm Part suitable for: trucks Technical condition: very good Visual condition: very good Damage: none Type number: 16051346 Serial number: 16051346 Ledpfjw Rk Dtox Aabjah Contact Luc Schoefs or Germain Daenen for further information.

Condition: good (used), Tool holder VDI 30 Lajdsww Hluspfx Aabjh

Condition: used, first registration: 01/2023, Year of construction: 2023, LANGENDORF 3-Axle Full Aluminium Grain Tipper Semi-Trailer SKA 24/30 • ABS • EBS • ALCOA rims • 3 air-suspended BPW axles • Lift and lowering system • Axle load: 3 x 9,000 kg • Gross weight: 39,000 kg • Unladen weight: 6,080 kg • Payload: 32,920 kg • Tyres: 385 / 65 R 22.5 • Tyre tread: 80 - 90 % • Platform • Sliding tarpaulin • Total trailer length: 10,500 mm • Volume: 45 cubic metres Laedpfxsw Ix Arj Aabjh - General Inspection / TÜV SP: new! Errors and subject to prior sale reserved! = Further Information = Contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Maximum Speed: 2900 RPM. Power supply 415V 3PH 50Hz Type: V870 50Hz Condition: used / used Lodpsn Arbpefx Aabjah Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Treif Twister 10/20/30/60 grid Ledpfxjw Drh Io Aaboah

Condition: new, bending length: 2100sheet thickness: 30upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.060.00 Lsdod Ab S Eepfx Aabeah We have many references!

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions Lajdpjgtty Tofx Aabsh height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Lasdpfx Aofktnysaboh Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For you as a buyer the following information for your safety! The following points are carried out at our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: new, sheet thickness: 30bending length: 4100upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- Lodjd Ab N Tjpfx Aabjah - side supports EURO 16.800,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: excellent (used), Weiss temperature chamber Here we offer Weiss temperature chamber. Converted to R452a Weiss temperature chamber air cooled Temperature range: from - 30°C to 180°C Temperature change rate cooling 1,6 K/min Temperature change rate heating 2,1 K/min Test chamber dimensions: Width 550 mm x depth 750 mm x height 800 mm Housing dimensions: Width 800 mm x depth 1500 mm x heights 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4,9 kW Rated current 9 A Refrigerant: R452a Ledpeic Rgfsfx Aabsah Weight: 515 kg Type: WT1-340/30 For you as a buyer the following information for safety! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, sheet thickness: 30bending length: 2600upper roll diameter: 390 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel Lodpfx Aaod Ab Rrobsah - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.450,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2600sheet thickness: 30upper roll diameter: 390 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Leded Ab Sxopfx Aaboah - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.450.00 We have many references!

Condition: new, sheet thickness: 30bending length: 2100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Laodpfsd Ab Rxjx Aabjh Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.060,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!