Used Arbor for sale (568)

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 96101805, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. Tedpfe Ahg D Tex Airod TECHNICAL DETAILS General Information Machine number: 96101805 Control system: Siemens Sinumerik Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 220 V Connected power: 105 kW Rated current: 200 A Spindle and Machining Area Diameter of rotation over the bed: max. 185 mm Diameter of rotation over the compound slide: max. 185 mm Spindle bore: 205 mm Number of bed slides: 2 Number of compound slides: 2 Longitudinal travel: 800 / 2,000 mm Cross travel: 320 mm Tailstock Arbor taper: MK 5 Arbor diameter: 110 mm Manual tailstock travel: max. 300 mm Transport Transport: possible on a standard truck EQUIPMENT Chip conveyor Coolant system Loading system Large quantity of VDI tool holders VDI tool holders, some equipped with cutting tools Documentation

Condition: good (used), A. COSTA PUMA/2/75 – 2 x 55 kW TWO-ARBOR MULTI-SAW For sale: a professional Italian two-arbor multi-saw from A. COSTA, model PUMA/2/75. This machine is designed for longitudinal resawing of wooden elements. It features a heavy-duty, industrial design with two saw arbors and a crawler feed system. Todpfx Aez D Nqbsirjd MACHINE SPECIFICATIONS: • Manufacturer: A. COSTA S.p.A. – Marano Vicentino, Italy • Model: PUMA/2/75 • Machine number: 90EC3 • Year of manufacture: 1990 • Type: two-arbor multi-saw • Power supply: 380 V • Frequency: 50 Hz • Rated power (from nameplate): 114 kW • Rated current (from nameplate): 217 A • Main motors: 2 x 55 kW • Feed motor: 4 kW • Maximum cutting height: 160 mm • Two saw arbors • Crawler feed system • Material pressure rollers • Adjustment of working unit settings • Kickback protection • Central lubrication system • Electric control panel • Cutting width: 350 mm The machine's design allows for efficient resawing of wood using two saw units – a lower and an upper arbor. NAMEPLATE: A. COSTA S.p.A. Marano Vicentino – Italy MODEL: PUMA/2/75 NO.: 90EC3 YEAR: 1990 POWER: 114 kW CURRENT: 217 A VOLTAGE: 380 V FREQUENCY: 50 Hz USED MACHINE – CONDITION AS SHOWN IN THE PHOTOS. The machine is preserved in its original, heavy-duty industrial construction. It is sold in the condition and configuration shown in the photos. Due to the machine's size and weight, on-site pickup and transport by the buyer are preferred. The machine can be inspected before purchase.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 900 mm, feed rate X-axis: 40 m/min, overall weight: 900 kg, roll diameter: 35 mm, total width: 6,000 mm, total length: 2,500 mm, total height: 1,200 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, roller diameter: 140 mm, transport height: 1,200 mm, transport length: 2,500 mm, transport width: 1,250 mm, input frequency: 50 Hz, power of feed motor: 1,500 W, This video demonstrates the feeder of a four-side planer processing an oak board. Technical specifications: Feeding speed: 5-60 m/min Minimum board length: 1.2 m Maximum board length: 6 m Minimum board width: 40 mm Maximum board width: 300 mm Minimum board height: 10 mm Maximum board height: 120 mm Number of feed rollers: 2 Feed drive power: 1.5 kW each Chain conveyor drive power: 1.1 kW Tedpfx Ajyftgaeired Feeders can be equipped with chain conveyors featuring various numbers of chains, different chain spacings, and conveyor lengths to suit specific requirements. ARBOR also offers design and manufacturing services for sawmill and woodworking lines of any complexity.

Condition: used, Used centering arbor 35 mm for Weinig Rondamat 936, Rondamat 925, and Rondamat 934 grinding machines, or similar machines with a dividing head. Technical data: - Clamping length: 230 mm - Arbor diameter: 35 mm Tjdpj Agvcvofx Airjd - Support diameter L: 25 mm - Support diameter R: 30 mm

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 21002, functionality: fully functional, operating hours: 6,800 h, input voltage: 380 V, type of input current: three-phase, cutting height (max.): 180 mm, cutting width (max.): 800 mm, saw blade diameter: 2,20,360 mm, height adjustment type: electric, saw blade bore: 50 mm, actuation type: hydraulic, total length: 1,950 mm, total width: 1,600 mm, total height: 1,580 mm, table height: 800 mm, Equipment: CE marking, documentation/manual, saw blade guard, Double-arbor multi-blade saw with four laser cutting guides and a feed conveyor with an automatic, adjustable right-hand side guard, length 3000 mm, width 700 mm. Conveyor belt drive. Includes three conveyors, length 3000 mm x 800 mm. Main dust extraction port diameter: 250 mm / secondary: 140 mm. Todpfx Aio Aduyujrod Control via PLC console with two joysticks (see photo).

Condition: good (used), Year of construction: 2012, functionality: fully functional, workpiece diameter (max.): 85 mm, spindle speed (max.): 2,750 rpm, Equipment: emergency stop, For sale is a precision wet cut-off grinding machine from the brand ATM, in good, used condition, as can be seen in the pictures. Tsdpe Agc Ivefx Aired Technical data: • Manufacturer: ATM • Model: Brillant 230 • Year of manufacture: 2012 • Disc diameter: approx. Ø 250 mm • Max. sample size: approx. Ø 85 mm • Cut-off disc arbor: approx. Ø 32 mm • Y-axis (miter cut): approx. 125 mm • Table WxD: approx. 300 x 250 mm • Speed: approx. 2750 rpm • 400V / 50Hz • With matching cooling system • Accessories: a total of 3x ATM vices • The system is ideal for precise, wet abrasive cut-off operations in the laboratory or in metallographic sample preparation. • Condition: Used, functional Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT stated. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Tsdpfe Aa Azlsx Airsd Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Tsdpfxoz Et E Es Airod Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: 3244.00, total length: 2,700 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 2,800 kg, DMT Kern CD 480 Lathe Technical data: Control: Heidenhain Manual Plus 3110 Working area: Swinging diameter over bed: 475 mm Swinging diameter over cross slide: 260 mm Cross slide travel: 260 mm Distance between centers: 1,000 mm Turning length: 880 mm Spindle stock: Spindle head DIN 55026: Size A6 Spindle diameter in the front bearing: 115 mm Spindle bore: 78 mm Standard chuck sizes: 200/250 mm Speed range (constant speed): 1–3,000 rpm Cross slide: Feed rate, facing: 0.001–1000 mm/rev Feed rate, longitudinal and threading: 0.001–2000 mm/rev Rapid traverse rate, facing/longitudinal: 5/10 m/min Tailstock: Arbor diameter: 70 mm Arbor travel: 120 mm Arbor taper: MK 5 Scope of supply: No further accessories included The center and the jaws in the chuck are not included in the scope of supply! Dimensions & weights: Installation dimensions L x W x H approx.: 2700 x 1500 x 2000 mm Weight approx.: 2800 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. Tedpfx Aij Af U Icersd ►The goods are sold with the exclusion of any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: new, Year of construction: 2025, The automatic stacker is suitable for stacking boards of different lengths in layers. The stacker automatically adjusts to the board length to be stacked. The desired stacking height can also be preset. The power consumption of this machine is only 12 kW. Tjdpfx Aijhbr Tpsrsd ARBOR designs and manufactures stackers individually - according to your production parameters. . . . . . . . . . . . . . . . ARBOR manufactures equipment of varying complexity for woodworking enterprises.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press -WAG 850 The machine is tested according to VDE until 23.09.2026. Tsdpjqrqz Asfx Airod Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Safety distance: 128 mm

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, roll diameter: 60 mm, total width: 6,200 mm, total length: 3,000 mm, total height: 2,000 mm, input voltage: 380 V, type of input current: three-phase, warranty duration: 12 months, height adjustment type: mechanical, travel distance Y-axis: 1,200 mm, transport height: 2,200 mm, transport length: 6,200 mm, transport width: 2,400 mm, input frequency: 50 Hz, power of the servo motor: 3,500 W, Destacking device and feed table for four-side planners Tjdpjv H R Dhjfx Aired Fully automatic destacker and feed table Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours) Complete set: destacking device, feed table

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number 7405 Tjds Agupfjpfx Airjd TECHNICAL DATA - max. cutting height 150mm - max. workpiece width 700mm - working width of the saw mandrel 530mm - max. saw blade diameter 450mm (installed 350mm) 350mm - arbor bore diameter 90mm from above: - pawls - 2 toothed draw shafts from below: - 2 smooth draw shafts - saw mandrel - smooth draw shaft - 4 feed speed settings - feed motor approx. 2kW - 30kW motor - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – Used machine, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business relations with the manufacturer.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 165 kW (224.34 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw blade diameter: 300 mm, height adjustment type: hydraulic, saw blade bore: 85 mm, actuation type: electric, overall weight: 4,900 kg, Equipment: documentation/manual, We offer a used, twin-arbor multi-blade saw, MEBOR VC 700 D16, manufactured in 2021. The machine is in fully working condition and ready for operation. Manufacturer: MEBOR Model: VC 700 D16 Machine type: twin-arbor multi-blade saw Year of manufacture: 2021 Power supply: 3/N/PE~400/230 V Frequency: 50 Hz Power: 165 kW Tsdpfxe Afwuqj Airjd Weight: 4900 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tsdpoz Ng I Ajfx Aired Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Year of construction: 2015, condition: as good as new (ex-display), Arbor Tjdpofgwlzjfx Airjd Manufacturer: Kelch unused, in wooden box for end mills for rollers No. 1115 Drive rings: sizes 27 / 32 / 40 mm Weight: 10 kg Age: estimated

Year of construction: 2014, condition: ready for operation (used), Optical measurement machine manufactured in 2014. This DMG MORI UNO 20/40 features a travel path of 202.207 mm on the X-axis and 404.397 mm on the Z-axis. It includes a manual SK50 spindle with vacuum clamping and comes with various optional reduction adapters. If you are looking to get high-quality optical measurement capabilities, consider the DMG MORI UNO 20/40 machine we have for sale. Contact us for further details. Tedpfx Aio Ahhbqsrjd - Spindle Type: SK50 manual spindle with vacuum clamping- Travel Path X-Axis (min / max): -50.862 mm / 202.207 mm- Travel Path Z-Axis (min / max): 0.102 mm / 404.397 mm- Operating Voltage (U): 230 V- Power Consumption (Pmax): 650 VA- Operating Pneumatic Pressure: min. 6 bar – max. 8 bar (Nominal: 6 +/- 0.5 bar)- Software: Microvision Version V5.1.8.7 (Installed language: German)- Operating System: Windows 7 (German)- PC Hardware: Terra All-in-One PC (Serial No.: R3731075) – Note: Defective / Non-booting- Installed Postprocessors: Fanuc, Tec35, MicrosetCC ITNC530, MicrosetCC_Millplus, Millplus (2Stufen), Siemens 840, TNC- Calibration / Plug Gauge: Calibration arbor SK50 (DMG Microset, ZTP-1898; L=74.98 mm, D=5.94 mm, R=2.97 mm)- Optional Reduction Adapters: * Adapter SK50 to HSK63 * Adapter SK50 to SK40 * Adapter / Calibration arbor SK50 to SK50- Included Peripherals & Accessories: * Terra All-in-One PC (defective) with metal table stand and power supply * USB flash drive with complete device data backup * Standard USB keyboards and computer mice- Maintenance History: Comprehensive service, geometry calibration, and buffer battery replacement completed by HAIMER Microset on 21.10.2025

Condition: used, Year of construction: 2023, Max. cutting width: 4600 mm Max. cutting height, horizontal: 1958 mm Max. cutting height, vertical: 2070 mm Max. processing thickness: 60 mm Saw blade diameter: 250 mm Motor power: 4 kW Saw blade arbor: 30 mm Bottom support: fixed rollers Material support: aluminum lath grid with plastic pads Small parts support: yes Measuring system: scale Saw head swivel: manual Mounting: free-standing Extraction: external extraction required Weight approx.: 910 kg Tedpfxj Agw H Ts Airod Extraction diameter: 2x100 mm Storage location:

Condition: good (used), Year of construction: 1998, - Heidenhain CNC Pilot control system - Accessories included - Powered tooling - Counter spindle Work area Todpfx Aie Afhifsrjd Max. turning diameter 160 mm Swinging diameter over bed 440 mm Swinging diameter over compound slide 210 mm Turning length 350 mm Main spindle Spindle bore 56 mm Max. spindle speed 5,000 rpm Drive power 7.5 kW Number of spindles: Main spindle C-axis Travel distances X-axis 160 mm Z-axis 350 mm Tailstock travel 350 mm Tailstock Arbor diameter 80 mm Tailstock travel 350 mm Tailstock mounting MK 3 Feeds Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Space requirement approx. 2,800 x 1,800 x 1,800 mm Machine weight approx. 3,400 kg

Year of construction: 1960, condition: used, R.A.S. Rotary Turning Press Type 200-20 Machine No. 117/6 Stroke 200 mm Todpfxjic Rn Uj Airod Pressing force 20 t Spindle diameter 60 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Tjdpsz Hcp Njfx Airsd Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 80753, total height: 2,300 mm, total width: 1,750 mm, total length: 2,500 mm, overall weight: 4,700 kg, Equipment: documentation/manual, Offered for sale is a universal tool milling machine, MAHO Type MH 800 P, with digital display and linear control system HEIDENHAIN TNC 121. Year of manufacture: 1980 Travel distances X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z-axis: 10-500 mm/min, infinitely variable Tjdsztkbcspfx Airsd Feed rate Y-axis: 5-250 mm/min, infinitely variable Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Arbor displacement, vertical: 100 mm Arbor feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Arbor displacement, horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 volts, 50 Hz, 10 kW - Swiveling control panel - Central lubrication - Operating manual Machine dimensions L x W x H: 2.5 x 1.75 x 2.3 m Weight: approx. 4,700 kg

Condition: used, Year of construction: 2011, operating hours: 2,200 h, functionality: fully functional, power: 7.5 kW (10.20 HP), year of last overhaul: 2026, We offer this used Schneeberger Norma CFG 7.5 kW tool grinding machine, manufactured in 2011, for sale. OPERATING HOURS: 2200! Automatic programmable central lubrication system Pneumatic hoses completely renewed 4/2026 Standard version PLUS: - Hydraulic quick tool clamping system - Grinding wheel spindle HSK 50 - Quinto-Basic-SW woodworking tools - Coolant filter unit 330l; 6.3 bar - CO² fire protection system Special accessories: - Manufactured in 2013 - Workpiece loader MIL incl. quick-change tool holder for profile cutters and shank tools - 1 piece of pallet for profile cutters - profile thickness: 2mm; plate width up to 150mm Machine Specifications – NORMA CFG (Schneeberger Invoice No. 88088, dated 21.12.2011) MAIN MACHINE M-55039-0031 – CNC Tool Grinding Machine "NORMA CFG" Power: 7.5 kW Machine No.: 21'692 Voltage: 400V / 3-phase / 50Hz EQUIPMENT & OPTIONS M-51019-0021 – Automatic programmable central lubrication M-50019-0022 – Precision 3D touch probe PSM 118 M-82090-0003 – Network connection M-56009-1993 – Remote maintenance software, 2 years free M-50009-0191 – Dressing roller on mounting arbor M-530890098B – Hydraulic quick tool clamping, ISO 50 M-10030-0115 – Expansion collet chuck ISO 50, D=20 M-10030-0116 – Expansion collet chuck ISO 50, D=32 M-56039-0044B – Plate mount, hydraulic, horizontal M-50020-0211B – Intermediate layer 40 M-50020-0003B – Intermediate layer, standard M-56009-0643 (x6) – Grinding wheel mount HSK50, 20/70x85 M-45000-0000 – Quinto base software M-45000-0010 – Quinto standard tools M-45001-0210 – Quinto software eGrind viewer M-45000-7030 – Quinto software dxQ, woodworking inserts M-45001-0010 – Quinto easyPROFILE M-45000-1010 – Quinto software, woodworking tools M-50009-0190A – Flow monitor M-50019-0049 (x6) – Complete plate with coolant pipes M-55039-0059 – Coolant filter unit, 330 L, 6.3 bar M-50009-0036 – CO2 fire suppression system M-55039-0086 – Electrostatic extraction/suction unit M-600000-051 – Training in Roggwil/Weissach, 3 days M-600000-052 – Installation and follow-up training, 3 days in Gütersloh M-20000-0032 – Truck packaging M-20000-0050 – Transport incl. transport insurance (not unloaded), DAP DE-Gütersloh Tsdpszqu Tdjfx Aired If you have any questions or need further information, please feel free to send us a message.

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm Tjdpju N Ay Rsfx Aired No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: used, Year of construction: 1968, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, saw blade bore: 32 mm, Equipment: documentation/manual, saw blade guard, - Saw blade arbor, 32 mm diameter - Two cutting speeds (1050 and 2100 rpm) => The saw can be used for both wood and plastic processing thanks to the two cutting speeds and the corresponding saw blades - Locking possible at 45 or 90 degrees; cuts between these locking positions are also possible - 380 V electrical connection - Sold without saw blades Tedpoz E S Ncsfx Airjd - Includes operating manual