Used Tables for sale (17,054)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Dwedpfxozquqcs Aptob Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Dsdszv Rc Sopfx Aptswb Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 60 °, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between September 21st and October 1st! TECHNICAL DETAILS Travel range X-axis: 550 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Swivel angle A-axis: -120° to +60° Swivel angle C-axis: n x 360° Distance from HSK-E tool holder to table: 450 mm Clamping area: 650 x 800 mm Pallet dimensions for 4th and 5th axes: approx. 300 x 300 mm Spindle Spindle mounting: HSK-E 40 Spindle speed: 0 to 42,000 rpm Spindle power S1: 15 kW Spindle power S6: 17 kW Axes and Accuracy Drive type: Digital AC servo motors, fully synchronized Travel speed: max. 30 m/min Acceleration: max. 15 m/s² Repeatability: 0.002 mm Digital display: 0.001 mm or 0.0001 mm, selectable Nominal speed in NC axis operation A-axis: 40 min⁻¹ Nominal speed in NC axis operation C-axis: 40 min⁻¹ Dodpezquprefx Aptowb Tool Changer Type: Pick-up disc magazine Magazine slots: 32 MACHINE DETAILS Machine operating time: 484 d 11 h 24 min 06 s Spindle operating time: 4,246 h 55 min 36 s Type: 5-axis CNC machining center Connected load: 38 kVA Input voltage: 400 V AC, 3-phase, 50 Hz Control voltage: 24 V DC Fuses: max. 63 A Overall length: 3,300 mm Overall width: 2,200 mm Overall height: 2,300 mm Machine weight: 7,400 kg EQUIPMENT - Technical documentation and manual - Three spare pallets - HSK-E-40 tool holders - Pallets with attached specific fixtures External reference: Demo - Lot 1

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Dwjdjzqupxepfx Aptsb Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Djdpozqunujfx Aptjwb Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, TECHNICAL DETAILS Travel range X-axis: approx. 4,760 mm Travel range Y-axis: approx. 1,600 mm Dwjdpfxjzx Anfo Apteb Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 x 12-position MACHINE DETAILS Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbeam Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: The designation BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Condition: good (used), Year of construction: 2019, Altendorf F45 EvoDrive panel saw in good condition and fully functional, manufactured in 2019. Dedpfx Aozzrwueptswb Saw blade tilt: 0° to 46° Max. saw blade diameter: 450 mm Max. cutting height: 150 mm (vertical) / 103 mm (at 45° tilt) Power (main motor): 5.5 kW Parallel fence: 1,000 mm Angle/cross fence: extendable up to 3,200 mm Dust extraction connections: Ø 80 mm on the safety guard (top), Ø 120 mm on the port (bottom) Machine weight: approx. 1,200 kg Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses, excluding any warranty for defects. No guarantee, warranty, or right of return.

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Type: Kappa 550 Dwedpfx Apozy Uzyetjb Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Dodpfxozwvmre Aptewb Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, Year of construction: 1972, spindle diameter 100 mm x-travel 1400 mm Dwjdszycrgopfx Apteb dismantled ja tool adaptor SK 50 digital ja weight of the machine ca. 14 t

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 Dedozwv Dkjpfx Aptswb * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Condition: used, Year of construction: 2015, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dwjdszrkxrepfx Aptjb Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1985, Altendorf panel saw F 45, Year of manufacture: 1985 Machine number: 85-4-122 Motor: 5.5 kW / 400 Volt Scoring unit: 0.75 kW Cutting length: 2800 mm Dodezx R N Djpfx Aptowb Cutting width: 1250 mm Raising/lowering and tilting up to 45° via handwheel Spindle speeds: 3, 4, 5 and 6000 rpm Max. saw blade diameter: 400 mm Max. cutting height: 130 mm Parallel fence Table extension: 800 mm Miter gauge

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Djdjzwqyyspfx Aptowb Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, Equipment: saw blade guard, scorer, The panel saw comes with approximately 10 saw blades and scoring saws, as well as a laser. Djdey Suidepfx Aptowb

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. Djdpfezwac Rjx Aptewb The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.

Condition: used, Martin t60 panel saw carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, Dwodpfjzzdi Nex Aptjb main motor: 5.5 kW, 3 cutting speeds, max. blade diameter: 400 mm.

Condition: used, Year of construction: 1987, total length: 2,800 mm, total width: 1,700 mm, total height: 1,300 mm, Colour: Green Weight: 500 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 87-7-23 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 145 - Parallel stop displacement [mm]: 1100 - Roller table length [mm]: 2800 - Table width [mm]: 1150 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Manually adjustable axes: Cutting height, Tiltable - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 2800mm x 1700mm x 1300mm (l x w x h) - Transport weight [kg]: 500kg Dodpjy Ttraefx Aptswb - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) Dwodpfx Aozyx Evjptsb 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, cutting height (max.): 125 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: mechanical, rotational speed (max.): 6,000 rpm, total length: 3,200 mm, Equipment: documentation/manual, scorer, Welcome, we are selling a Robland Z320 panel saw. Motor: 7.5 kW / 400 V Saw head can be swiveled up to 45° Saw blade diameter: 400 mm Sliding table length: 3,200 mm Dust extraction port: 120 mm Dodpfxjzylxpo Aptjwb Max. cutting height: 125 mm Max. cutting height at 45°: 100 mm Speeds: 4,000/5,000/6,000 rpm Scoring saw blade diameter: 100 mm Scoring saw cutting height: 0 - 4.5 mm Scoring saw tilt: 0 - 45° Scoring saw speed: 7,000 rpm with scoring saw with table extension with table widening with edge guide with miter gauge with additional workpiece support with standard tools for saw blade replacement with operating manual in German without upper dust extraction/hood Location: 49176 Hilter a.T.W., unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1600058, total height: 300 mm, total width: 670 mm, total length: 890 mm, rotary table diameter: 600 mm, table diameter: 600 mm, compressed air connection: 8 bar, Haas HRT600 CNC rotary table / 4th axis / Ø 600 mm Haas HRT600 CNC rotary table (4th axis) for sale. This rotary table comes from a Haas VF-6B/40HE and was used as a 4th axis. The table is equipped with a servo drive and was tested on the machine again before removal. The axis could be moved and rotated flawlessly via the control. Dwedpfxozzbito Aptob The rotary table has a diameter of approximately 600 mm. Serial number of the rotary table: 1600058. Condition Rotary table rotates and moves via the Haas control. Functionality tested before removal. No detailed geometric measurement performed. Angular accuracy, runout, and repeatability were not checked with a dial indicator. Sale due to non-use. Technical data Manufacturer: Haas Automation Model: HRT600 Type: CNC rotary table / 4th axis Table diameter: 600 mm Serial number: 1600058 Year of manufacture probably 2004/2005 (matching the original machine)

Condition: good (used), functionality: fully functional, rotary table diameter: 1,000 mm, overall weight: 9,000 kg, grinding diameter: 1,000 mm, type of input current: three-phase, workpiece diameter (max.): 1,000 mm, table diameter: 1,000 mm, Hello, We have a 55kW carousel surface grinder with a 1000mm diameter table for sale. The grinder was purchased last year and comes with a complete set of accessories, including: - Siemens 55kW soft starter - 2 sets of grinding wheels - Original control cabinet Dodpjzxpi Aofx Aptjwb - Sludge separator - Tank with pump We invite you to make a purchase.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 910718, 1 Cloos workpiece positioning unit, swivel and rotary device, with a protective screen in the center of the table. 2x2m distance between centers, center height 1300mm, 180° swivel unit type GR502, motorized. Two rotary devices with opposing supports are mounted on the platform of the rotary table. The drive side of the rotary device is designed as in type WPV-DP-5000 N. Load capacity per rotary device approx. 500kg. Dwjdpfjzkvarox Aptjb Was mounted on a Cloos welding robot ROMAT 76 S with Rotrol control, manufactured in 1990. No exchange, return, or warranty possible.

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Djdpfx Ajzukv Njptswb Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Weight: 1.450 kg - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Automatic - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Dwodpfx Apsyvh Rvsteb VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels