Used Asa K11 for sale (556)

Condition: excellent (used), functionality: fully functional, Casadei C4 Four-Sided Planer Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle configuration: 1. Bottom – 4 kW 2. Right – 4 kW 3. Left – 4 kW 4. Top – 4 kW Spindle speed: 6000 rpm Feed speed adjustable via variator: 4–21 m/min Tool size: 125–140 mm Feed driven by cardan shaft Technical documentation Fpsdpfeyxmnljx Aa Nsg

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Fpedpfx Aajyb Rpde Nsg Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, 1 feed speed, Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Fpsdpfx Aasy Eyhre Nsg Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Year of construction: 2014, condition: used, Good condition feed conveyor belt. Fpodpfx Aaet Ul Elj Njg Dimensions are in the photo's

Year of construction: 2018, condition: used, Jasa feeding conveyor belt, previously used for feeding a Multihead weigher. Fpsdpfou N Ndiex Aa Nog

Condition: used, Very good condition Z-elevating belt. Measurement in the photo album, please reach out for more information. Fedpfx Aou N Nmqoa Nepg

Year of construction: 2014, condition: used, Jasa conveyor belt Fpsdpfx Aasu N Nfms Njg

Condition: excellent (used), Year of construction: 1999, Year of manufacture: 1999 Reach: 2531 mm Control: CNC Fpodoyu H R Rjpfx Aa Nsg Load capacity: 150 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Fjdpfev Nzpmjx Aa Nopg Maximum thickness 45 mm Built in 1994 With spare blade

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,500 h, machine/vehicle number: 963, Universal Walking Vibropress for Multilayer Production: For efficient mass production of: - Small-format elements such as paving stones and blocks in multilayer production - Special elements such as curbstones, palisades, culverts, manhole rings, and relieving rings in single-layer production Fpedexz Egcjpfx Aa Nsg The machine is designed for the manufacture of large-scale vibropressed components. Production on vibrating table: Maximum production area: 1,240 mm x 1,000 mm Maximum product height: 650 mm Maximum product height in multilayer production: 250 mm Minimum product height in multilayer production (on pallet): 40 mm Maximum height (transportable) of multilayer package including pallet: 640 mm Production on the ground: Maximum production area: 1,240 mm x 1,240 mm Minimum product height: 250 mm Maximum product height: 1,200 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, Light fastness tester with water-cooled xenon arc lamp + 600 h of operating time left on the installed xenon arc lamp Fpjdpfxoy Dht Hj Aa Neg + 1 new xenon arc lamp included (value: €2,500)

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,100 mm, Veneer Guillotine Casati Macchine CIP31 Fpedpfx Aoyzzccsa Njg Working length: 3100 mm Total length: 4070 mm

Condition: excellent (used), Year of construction: 2021, IGM/Kawasaki robotic welding station Positioners - IGM Robot - Kawasaki BA006L year 2021 Power source - Fronius TPS 400i year 2021 Overall dimensions of the station - 6x11m Positioners with a load capacity of 300kg: 1x 2-axis positioner with rotation column 1x column positioner (distance between columns from 1400 to 4500mm) Computer: in addition to the standard control, equipped with multi-axis (two slots still free with the possibility of attaching Kawasaki motors) Fpodpfx Aaolcbmbe Nsg Engines: dedicated Kawasaki motors (with the possibility of simultaneous operation of the robot and positioner) Robot track - 7m run

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Fpsdpfx Aemu Agpoa Nog Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation.

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load Fpjdpfx Aeh Dv Uqja Nsg 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: new, functionality: fully functional, Year of construction: 2025, product width (max.): 1,250 mm, working width: 1,250 mm, conveyor belt width: 1,250 mm, product height (max.): 1 mm, Machines for sheet metal winding from bigger to smaller coils Fpjdpswqc I Sjfx Aa Nog of inner diameter of 300 mm and biggest mass of 300 kg 1250mm. The winder has an integrated manual counter, shears for transversal cutting and a probe for removing the winded sheet meta SAS small coil recoiler for coils up to 300kg, 1250 mm.

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Fpsdpfx Asmzbr Sja Neg Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: used, Year of construction: 2014, functionality: fully functional, The SASA 1000-liter cooking cell is an essential solution for improving your cooking processes in industrial environments. Designed in 2015, this machine combines performance and robustness to meet the demands of the most demanding production environments. Its stainless steel construction offers exceptional durability while facilitating cleaning and maintenance. Equipped with a powerful 27 kW steam generator, it ensures even heat distribution for precise and uniform cooking. This allows you to process a wide range of food products with complete confidence. Furthermore, its 400V three-phase + ground 50Hz power supply guarantees compatibility with standard industrial electrical installations. Fsdpfx Aasu H Ux Ho Nopg Its large 1000-liter capacity allows you to handle large production volumes, increasing productivity and reducing downtime. By incorporating advanced technologies, this cooking cell not only optimizes energy efficiency but also ensures maximum safety for operators. As a result, it helps reduce operational costs while improving the overall efficiency of your production line. Furthermore, its ergonomic design facilitates daily use. Intuitive controls allow operators to quickly master its operation, thus improving operational efficiency. Finally, easy access to essential components simplifies maintenance, extending the equipment's lifespan. Technical Specifications: Vacuum capacity: 1000 liters for large-scale production. Steam generator: 27 kW power for even cooking. Power supply: 400V three-phase + ground 50Hz for standard installation. Construction material: Stainless steel for increased durability. Year of manufacture: 2015, guaranteeing the latest technology. Gpm8Rofc

Condition: good (used), Code: 0300 Brand: CASADEI INDUSTRIA Model: V320 - CE Standard Automatic edge bander for pre-glued edges, for carpentry, furniture, custom-made furnishings, doors, panels and various items - CE Standard Features: Automatic upper feeder with toothed belt, speed 5 mt/min, height adjustable by means of handwheel with numerical position indicator Infeed guide Fodeyk Hgkepfx Aa Njpg Pneumatic coil cutting shear Automatic front and rear pneumatic end trimmer Upper/lower end trimmers at 11000 rpm with cutters Z4 Work surface 1800 mm with 7 adjustable rollers and polyzene slide guides Extendable front support for large panels Technical data: Min/max panel thickness 10-45 mm Edge thickness in coil 0,4-2 mm Min panel length 220 mm Min panel width 110 mm Gluing unit: Blower power LEISTER W 3400 - Temperature adjustment Total installed power 2 kW Suction port diameter 120 mm Overall dimensions mm 1800 x 700 x 1300 h Weight kg 236

Condition: used, functionality: fully functional, Year of construction: 2022, Mikasa Tamping Rammer MTX-60E — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Fjdpfxoy A Hcds Aa Nspg Price EUR 1,100 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, functionality: fully functional, Year of construction: 2022, Mikasa Tamping Rammer MTX-60E — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Fsdpfjy A Hb Tsx Aa Nepg - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,100 plus VAT | EXW Einbeck | Delivery upon request

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Fpsdpfx Asv Utd Hea Nog Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Material width 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm.

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Fodjyvt Exepfx Aa Nspg Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: new, Year of construction: 2023, machine/vehicle number: MR005067, Thicknesser with the possibility to plan up to 630mm wide and up to 300mm high. Very solid machine with simple operation. Height adjustment readable via mechanical digital hine is equipped with the following options: - Thicknessing table with 2 table top rollers - Tersa planer shaft, including 1 set of knives Technical specifications: - Maximum planing width: 630 mm - Diameter planer shaft: 120 mm - Number of knives: 4 pieces - Type of planer shaft: Standard - Maximum chip removal: 8 mm - Maximum planing height: 300 mm - Minimum planing height: 3.5 mm Fpedpfx Aaswd Hkqe Neg - Planer height reading: Mechanical digital - Feed speed: 5-8-12-18 /min - Dimensions of thicknessing table: 640 x 1000 mm - Height adjustment of thicknessing table: Electric - Motor power: 9.5 hp - Serial number: AB00031362

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Fpjdpfx Aoyw H H Sja Nsg Water heating