Used Asa K11 for sale (559)

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) Ibodpfxsz Eaz Tj Agyoc • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: used, Year of construction: 2019, Used straight-line glass edging machine, NEPTUN, Model Rock 11, Year 2019. Isdpfsz H I E Nsx Agysbc

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 200 mm, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 48 mm, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, spindle nose: ASA 5, Equipment: documentation/manual, CNC MSC 501 Turning diameter: 150 mm Maximum turning diameter: 420 mm Maximum turning length: 200 mm Spindle/tailstock bore diameter: 48 mm Spindle/tailstock bar passage: 45 mm Spindle/tailstock nose mounting: ASA 5 Ibjdpjz R Ug Djfx Agyoc Spindle/tailstock speed: 5000 rpm Spindle motor power: 7.5 kW Tailstock motor power: 7.5 kW Machine complete with: -Presetting on spindle and tailstock -No. 2 motorized turrets, 12 positions -Operating manuals and CE declaration Year of manufacture: 1999

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, turning length: 2 mm, CNC GE Fanuc Series 31i-MODEL 4 Max. workable diameter from bar: 67 mm Max. workable length: 300 mm Ibjdpfx Aex S Eyajgysc MAIN SPINDLE Maximum rotational speed: 4000 rpm Spindle nose: ASA 6" Spindle bore: 77 mm Inner bearing diameter: 110 mm Motor power: 22-26 kW (50%) TAILSTOCK Maximum rotational speed: 5000 rpm Spindle nose: ASA 5" Spindle bore: 55 mm Inner bearing diameter: 90 mm Motor power: 7.5/11 kW TURRET 1 AND 2 Number of positions: 12 Rotation time (1 position): 0.15 sec Powered tools: Number of positions: 12 Maximum rotational speed: 4000 rpm Motor power for powered tools: 1.1 - 3.7 kW (25%) "Y" axis travel of upper turret: 90 (+50/-40) mm Rapid traverse of "Y" axis of upper turret: 9 m/min "Y" axis travel of lower turret: 90 (+50/-40) mm Rapid traverse of "Y" axis of lower turret: 9 m/min

Condition: used, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 45,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, soot filter, traction control, - Adaptive cruise control - Aluminum fuel tank - Leaf spring suspension - Differential lock - Speed limiter - Air conditioning - Air-suspended seats - Particle filter - Rain sensor - Rear view camera - Sun visor - Toolbox - Power take-off (PTO) EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Mercedes-Benz Arocs Model Generation 5 3546, 8x4 EURO 6e - EuromixMTP EM 10 L NEW - without registration Vehicle equipment: Engine OM470, R6, 10.7 l, (459 hp), 1900 Nm, 2nd generation OM470 engine Engine standard Euro VI, E Wheelbase 4550 mm Transmission G 230-12/11.7-0.78 Mercedes PowerShift 3 Rear axle, crown wheel 233, planetary, 13.4 t Front axle 7.5 t F18LHA 90 2x 315/80 R 22.5 Regio Goodyear EQMAX S Axle ratio i = 4.333 Tank 320 l, left, 735 x 700 x 750 mm, aluminum AdBlue tank 25 l Disc brake, on front and rear axle Electronic braking system with ABS and ASR ABS, switchable EuromixMTP - Concrete mixer body EM 10 L Concrete mixer equipment Model: EuromixMTP EM 10 L Nominal volume 10 m³ ready-mix concrete Lightweight mixing drum Lightweight mixing drum made of HARDOX S450 material Lightweight mixing blades made of HARDOX S500 material Gearbox manufacturer ZF-P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated, manufacturer ASA Mixing control mechanical and start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with a service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge trough and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% With emergency stop function according to EU safety technology Mudguards made of aluminum over the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C"-coupling Operation & Electrical System Mixer operation – mechanical, rear Start-stop system (with EDC) Geometric volume 61 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian Iodpfszfzhwex Agyjbc • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, ...)

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space volume: 9 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, seat heater, soot filter, traction control, trailer coupling, - Heated mirrors - Leaf spring suspension Ijdpey Anf Hefx Agyebc - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air-suspended seats - Particle filter - PTO - Radio/CD - Rear view camera - Sunroof - Seat heating - Sun visor EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Renault C 480 8X4 Euro 6e EuromixMTP EM 9 L concrete mixer truck ENGINE: DE 13, displacement 12.8 liters, max. power: 360 kW at 1404-0 rpm Optidriver transmission AT 2612 (14.94 - 1) Wheelbase 4350 mm Rear axle ratio: 3.33 Tire size 315/80 R22.5 Two electrically adjustable and heated exterior mirrors. Rear window tinted Pre-wiring for CB radio Rubber floor mats LUXURY DRIVER'S SEAT: Adjustable vertical damping Seat cushion tilt, longitudinal and height adjustment Removable cover, adjustable headrest, quick seat lowering with height setting retention, adjustable side support of the backrest, adjustable side support of the seat cushion, adjustable lumbar support, seat cushion extension, seat heating, driver's seat ventilation, two armrests on the driver's seat Viscope exterior sun visor. Compressed air gun in the cab Concrete mixer truck equipment Concrete mixer truck equipment: EuromixMTP - concrete mixer body EM 9 L Model: EM 9 L Nominal volume 9m³ ready-mix concrete Lightweight mixing drum Lightweight mixing drum made of HARDOX S450 material Lightweight mixing blades made of HARDOX S500 material Gearbox manufacturer ZF-P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooler system integrated, manufacturer ASA Mixing control: mechanical and start/stop electrical Compressed air water system Water connection on the platform with hose Water filling line, one-sided with C-coupling Mixing drum with a service flap Ladder with platform Rubber attachment on the filling funnel Swiveling, single-arm discharge chute made of steel Wear plates in the filling funnel, discharge chute and swiveling chute Drum lock to secure the drum during maintenance work Polyurethane primer Weight approx. 3,425 kg, variations +/- 5% with emergency stop function according to EU safety technology Mudguards made of aluminum over the rear axles 2x extension gutters made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Your advantages • Ready for immediate use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: ...

Condition: new, power: 450 kW (611.83 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 45,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, navigation system, onboard computer, - Heated mirrors - Leaf spring suspension - Differential lock - Speed limiter - Air conditioning - Air-suspended seats EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Mercedes-Benz Arocs Model Generation 5 4145 8x4 EURO 6e EuromixMTP EM 10 L - NEW - without registration Vehicle Equipment Engine OM471, R6, 12.8 l, (451 hp), 2100 Nm Euro6e Transmission G 330-12/11.63-0.77, offroad driving program, PowerShift 3 automatic Front axle 7.5 t, rear axle planetary axle 300, 13.4 t Tires, front axle 315/80 R 22.5, rear axle 315/80 R 22.5 Wheelbase 4550 mm Cab M-Cab Classic Space Disc brakes, front and rear Tank 290 l, left, 735 x 700 x 750 mm, aluminum - AdBlue tank 25 l Cab rear wall with window - tinted windshield Light sensor - daytime running lights Concrete Mixer Equipment Model: EuromixMTP EM 10 L Nominal volume 10 m³ ready-mixed concrete Ibedpjypar Refx Agysc Lightweight mixing drum Lightweight mixing drum made of HARDOX S450 material Lightweight mixing blades made of HARDOX S500 material Gearbox, manufacturer ZF-P5300 Hydraulic pump, manufacturer Bosch Rexroth Hydraulic motor, manufacturer Bosch Rexroth Oil cooler system integrated, manufacturer ASA Mixing control mechanical, start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service flap Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in the filling hopper, discharge chute, and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety technology Fenders made of aluminum above the rear axles 2x extension gutters made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection “C” coupling Operation & Electrical System Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 61 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off dump trucks • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Ibsdszz Iq Ropfx Agyjc

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Ibjdow Rqv Aspfx Agyec

Condition: ready for operation (used), Year of construction: 2001, Four loading units Pavan for lasagna sheets in industrial production lines are available. Capacity: approx. 250 trays/h, format range: 200mm/150mm, machine dimensions X/Y/Z: approx. 1800mm/850mm/1650mm, weight: approx. 325kg. An on-site inspection is possible. Ijdpexl El Hefx Agyjbc

Condition: used, Eliog Type: KU 300/09-06-06 K111183701 Chamber convection oven Usable space dimensions: Height mm 900 / Width mm 600 / Depth mm 600 External dimensions: Height mm 1775 / Width mm 900 / Depth mm 953 324 liters Number of door panels: 1 Connection value: 3X400V 50 Hz 13 kVA Heating power: 12 kW Rated temperature: 300°C Weight: 400 kg Condition: used Scope of supply: (See picture) Iedpfozd Rxiex Agysbc (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: new, mileage: 750 km, power: 324 kW (440.52 HP), first registration: 12/2025, fuel type: diesel, axle configuration: 6x6, wheelbase: 36,000 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), navigation system, onboard computer, trailer coupling, - Leaf spring suspension - Brake booster - Differential lock - PTO EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. MAN 33.440 BB 6x6 EURO 6e EuromixMTP EM 7 L concrete mixer Date of first registration: 12/2025 700 km (also available as 6x4) Vehicle equipment: Diesel engine MAN D2676 LFAZ, 324 kW (440 hp) output, 2,250 Nm torque, Euro 6e Transmission MAN TipMatic 12.28 OD - driving program MAN TipMatic Offroad, up to 70,000 kg Front axle tires optional 315/80R22.5 steering S+G TL Rear axle tires optional 315/80R22.5 drive S+G Front axle, 9,000 kg, driven axle without through-drive, straight, steered Rear axle HP-1352, 13,000 kg, driven axle without through-drive, straight, not steered Axle ratio, i=3.63 3,600 mm wheelbase Suspension type leaf/leaf (BB) Trailer coupling on end crossmember, RINGFEDER type RF50 A MAN Media System Advanced Navigation 7 inch Daytime running lights, LED Multi-function steering wheel, height and inclination adjustable M cab, medium length Air deflector against dust swirling Cruise control (FGR - fixed speed regulator) Air conditioning Noise level 80 dB (92/97EEC) Raised air intake with dry air filter / pre-separator Differential lock Fuel tank 300l left and 35l AdBlue Steel bumper, three-part MAN BrakeMatic (electronic braking system) Central locking Sun visor Driver's comfort seat, air-suspended AUX-in / USB in the dashboard EuromixMTP - EM 7 L mixing drum Model: EM 7 L Nominal volume 7m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight version made of HARDOX S450 material Mixing spirals in lightweight version made of HARDOX S500 material Gearbox manufacturer ZF-P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooler system integrated, manufacturer ASA Mixing control mechanical and start/stop electric Compressed air water system Water connection on the platform with hose Water filling line, on one side with C-coupling Mixing drum with a service flap Ladder with platform Rubber attachment on the filling hopper Iedpfxsym Tduo Agyebc Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Usable material: Concrete Front axle: Steered

Condition: used, mileage: 1,73,000 km, power: 63 kW (85.66 HP), first registration: 10/2014, fuel type: gas, CO₂ emissions: 168 g/km, fuel consumption (urban): 9.3 l/100km, fuel consumption (extra-urban): 5.8 l/100km, fuel consumption (combined): 7.1 l/100km, color: blue, gearing type: mechanical, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Optional extras: Audio controls on the steering wheel, Driving assistance system: Hill Start Assist (HSA), Rubber floor mats, Parking pilot system, Pre-installation for mobile phone/cell phone with Bluetooth interface Further equipment: Airbag passenger side can be switched off, Airbag driver/passenger side, Electrically adjustable exterior mirrors, Exterior mirrors in body color, Brake assist, Rev counter, ecoFLEX package, Electric brake force distribution (EBD), Electron. Traction control, Driving assistance system: Speedmonitoring, Luggage net / pocket on front seat backrest, Tailgate handle in body color, Cabin filter: Pollen filter, Isofix mounts for child seat on rear seat, Body: 3-door, Adjustable steering column (steering wheel), Model upgrade, Engine 1.2 ltr. - 63 / 61 kW 16V bivalent, Petrol / LPG, Gas engine (LPG), Rear fog light, Tyre repair kit, Tyre pressure monitoring system, Folding rear seat backrest, Low-emission according to Euro 5 emissions standard, Front side airbag, Height-adjustable front left seat, Seat cover/upholstery: fabric, 6x15 steel rims, Body-coloured bumpers, Tinted windows Ijdpfx Aemid Hpsgysbc

Year of construction: 2010, condition: used, Koenig Herkules HK1100/2400 bowl lift for Diosna and Kemper bowls max. 980 kg lifting weight max lifting height approx. 255cm Ijdpoivz U Hjfx Agyebc total height 330cm year of build 2010

Condition: ready for operation (used), SARIX ID 501015 Server module SN: MK116487 for Microfor HP4-EDM posalux,used, good condition, 100% functional, scope of delivery according to photos Ibsdpjmq Iadjfx Agyec

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, Equipment: air conditioning, central locking, trailer coupling, roof hatch, partition wall, metallic, green environmental badge (4), reversing camera, black, electric windows, radio, diesel automatic upholstery leather black radio Euro 6 green environmental badge multifunction steering wheel central locking electric windows 3-seater airbags air conditioning reversing camera trailer coupling side ramp 1-2 horses stallion separation roof hatch window in horse compartment fan surveillance camera in horse compartment separate rear door saddle and bridle holder storage space permissible total weight 3.500 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE. If you have any further questions, please do not hesitate to contact Mr. Faller by telephone. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Iodpfx Aevic Htjgyjbc

Condition: good (used), functionality: fully functional, turning length: 5,200 mm, turning diameter over cross slide: 940 mm, turning diameter: 900 mm, spindle bore: 204 mm, torque: 3,000 Nm, bar passage: 204 mm, total height: 3,600 mm, total length: 10,820 mm, total width: 3,381 mm, collet bore: 450 mm, spindle nose: ASA 15, overall weight: 39,000 kg, MULTITASKING Siemens 840 CNC retrofit in 2018 Diameter on the bench 940 mm Turning diameter over the entire length 900 mm Distance between centers 5200 mm Ibjdpfx Aoryvxhjgyec Tilting milling head + - 90° Torque 3000 Nm Axial force 60 Kn Turning head Chain tool change 48-place HSK 100° Spindle taper ASA 15 Bar passaging 204 mm Tailstock CM6 Tailstock diameter 195 mm Tailstock stroke 285 mm Automatic rest Autoblock 50-450 Chip conveyor Dimensions: 10820 x 3381 x 3600 mm Weight 39.000 kg USED MACHINE

Condition: ready for operation (used), Aquazur Aquasafe AQC540 BAAXAG, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ibjdei D Tz Tepfx Agyjc

Condition: good (used), Year of construction: 2007, operating hours: 18,000 h, Mazak QTN 250MSY Year 2005 Steering unit: Fusion 640 Maximum swing 640 mm Machine diameter / standard machinable diameter 380 mm Maximum workable length 525 mm Bar capacity 77 mm Main spindle dimension 250 Subspindle dimension 250 Spindle speed 4000 Spindle nose ASA 8 Spindle hole 88 VDI turret type Number of tools 12 Spindle speed 5000 rpm Isdpeiqgfbjfx Agyobc Main spindle motor (continuous / 40% ed) 26 KW 300L cooling tank Carpet chip conveyor

Condition: new, SEW Eurodrive WF20 DRS71S4BE05HR/ASE1/TF/AS7Y / 01.6631334201.0001.19 Gear motor SN: MK117826,unused, 100% functional, scope of delivery as per photos Ibedpfx Agjrhbdfsysc

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm Ibsdpfx Agsrrzkleyec 67641340f13ce

Condition: used, TECHNICAL DETAILS - Number of axes : 6 MAIN SPINDLE - Spindle nose : ASA 8'' A2 - Spindle power : 27 - 42 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 77 [mm] - Max. turning diameter : 550 [mm] - Max. diameter on bench : 920 [mm] - Max. chuck diameter : 745 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 16 - X/Z stroke : 315 / 800 [mm] - Y stroke : [mm] - Live tools speed : 4000 [rpm] - Live tools power : 16 [kW] COUNTER-SPINDLE - Spindle nose : ASA 6'' A2 - Spindle power : 8 - 14 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 43 [mm] - C axis indexing precision : 0,001 [°] POWER SUPPLY - Supply voltage : 400 [V] Ijdouhbnhspfx Agysbc - Total installed power : 45 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2800 x 2020 [mm] - Machine height : 2240 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of working hours : 18656 [h] EQUIPMENT - CNC : Fanuc 31i Model A - 3 colors status lamp - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO III

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results (demo machine for special price) The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Iedpfx Ageptcmjyobc Price includes: - Machine 100 % functional - incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N) - warranty 24 month - software LabTest - unique performance - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. Setup, training and DAkkS calibration Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices!

Condition: used, Year of construction: 1975, Accessories/Spare parts for a lathe Manufacturer: TADU, Origin: Spain Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mount: A 1-8", Spindle bore: 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin: Germany Model: MAS 3 An additional reduction gear is installed in the TADU F 650. This allows for a speed range of 8 - 42 and 40 - 200 RPM. Drive motor power: 5.5 kW Price: €4,650.00 Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Ibodpfx Agjctgb Teyoc DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1997, Control Heidenhain TNC 407 serial number 60/1997 x-travel 1.000 mm y-travel 600 mm z-travel 700 mm TISCHMAß: 1300 X 600 mm Ibsdpjumyhrjfx Agyec Werkzeugwechsler: 24- fac