Used Atl Hdi 1500 for sale (5,407)

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, - turning length: 1500 mm - turning diameter over bed: 500 mm - turning diameter over the slide: 300 mm Chedpfeq Hvayjx Adljd - spindle passage: 71.5 mm - tailstock sleeve travel: 180 mm - rapid slide travel: - longitudinal: 5.6 m/min - transverse: 2.8 m/min - spindle speed range: 18-180 rpm - longitudinal travel range: 0.64-26 mm/rev. - transverse: 0.32-13 mm/rev. - stroke of pull screw: 6 mm

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist 1.5 ton -Load capacity: 1 1/2 ton Cjdelg H Nwjpfx Adlehd -Chain Length: 3m -Quantity: 1 piece -Price per piece -Transport dimensions: 660/300/H150 mm -Weight: 19 kg/pc.

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 Chjdelzm Eqjpfx Adlsd center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: excellent (used), Year of construction: 2020, Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor, permanent magnet synchronous motor -Manufacturer: Bauer, adjustable stainless steel gear motor -Note: Frequency converter required -Type. SNFA5E09XA4-TF/VA-TM Chsdpjrqinmjfx Adled -Engine: speed 150-1500 rpm -Power: 1.1 kW -Hollow shaft: Ø 38 x 1750 mm -Protection class: IP65 -Dimensions: 645/200/H220 mm -Weight: 53 kg

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light Cedpfx Adjrkn Iiolehd

Condition: used, Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm Cjdpfxorkp Nxj Adlshd -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Cedjw E Itijpfx Adlohd Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, mileage: 1,19,000 km, power: 162 kW (220.26 HP), first registration: 10/2017, fuel type: diesel, overall weight: 10,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 3,300 mm, loading space width: 2,150 mm, loading space height: 400 mm, Year of construction: 2017, Equipment: ABS, crane, Iveco Eurocargo 100 - 220 / 4x2 Platform 3,30 m + CRANE Imported / accident-FREE IN GOOD CONDITION! YEAR OF PRODUCTION: 2017 MILAGE: 119 000 km EQUIPMENT ? ABS Chjdpfswa Hubex Adlod ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? AIRCONDITION ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 330 x 215 x 40 cm (L x W x H) TOTAL WEIGHT: 10 000 kg CAPACITY: 5 000 kg TIRE SIZE: 225/75R17,5 WHEELBASE: 370 cm SUSPENSION: SPRING CRANE: PALFINGER PC 1500 A TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 57079

Condition: excellent (used), Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg Codpewgdh Esfx Adljhd

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m Chedpfx Asxp Rzbodlsd voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: good (used), Year of construction: 2006, 1 used abrasive blasting system Manufacturer: GLÄSNER Type: DSK 1500 W Codpfx Ajzyx Siedljhd Year of manufacture: 2006 Factory number: 5162-003 Technical data Working area: 1,400 × 1,150 × 900 mm Max. operating pressure: 6 bar Drive power: 2.2 kW Process: Abrasive blasting Abrasive blasting tank: included Turntable: included Lighting: included Dust extraction and filtration unit Compressed air treatment Viewing window / gloves: included CE The system was used exclusively for blasting stainless steel and is in very good condition.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 6 mm, punching diameter: 76 mm, overall weight: 16,000 kg, throat depth: 1,500 mm, Equipment: safety light barrier, Boschert Multipunch 1500 8-station tool changer incl. 4-station and 8-station multi-tool base bodies (with current tooling consisting of 18 punching tools) Punching force: 280 kN (28 tons) Codszw Dz Dopfx Adlohd Travel ranges: x – 30500 mm (repositioning up to 9999 mm) y – 1580 mm Punch arm overhang: 1850 mm Tooling system: Trumpf Gr2 (76mm) as well as Boschert Revotool Labod 32065 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. installation height: 90 mm, stroke length 30 mm upwards and downwards, steplessly programmable. Table width, left + right: 3250 mm each Table depth: 3250 mm Table height: 900 mm Overall width: 6860 mm Overall depth: 5040 mm Overall height: 2080 mm Drive power: 25 kVA Machine weight: 16,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017 / Light gray RAL7035 Machine year of manufacture: 2011 Ball roller table Punching slug extraction Fast hydraulics (400/800 strokes) very well-maintained condition new screen with accessories

Condition: used, mileage: 2,10,000 km, power: 110 kW (149.56 HP), first registration: 05/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, had accident, soot filter, Special equipment: Rear door (opening angle 270 degrees), cargo area partition, seats in the driver's cab: double passenger seat, socket in the cargo/passenger compartment Additional equipment: Airbag on the driver's side, traction control system (ASR), exterior mirrors with wide-angle view, turn indicators integrated into the exterior mirrors, colored, rear wing doors without glazing, body/superstructure: high-roof van standard, fuel tank: 90 liters, steering column (steering wheel) adjustable in height, engine 2.2 liters - 110 kW HDi FAP CAT, wheelbase 4035 mm, low emissions according to Euro 5 exhaust standard, sliding door for cargo/passenger compartment on the right, seat cover/upholstery: fabric, bumper in body color * Engine is leaking oil and smoking. Probably the turbocharger. * Vehicle has been out of service for months. Codpfoz Amamox Adlshd

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Number of rotor blades: 76 Stator blades: 1 row Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 2 x 75 kW Chjdeyr Twropfx Adlsd

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 1 mm, TECHNICAL DETAILS Sheet width: 1,500 mm Sheet thickness: 1.5 mm Codjx I Egrepfx Adlshd

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Chsdpszlivijfx Adlsd Machine weight: 15,800 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h Chsdpfezul Tvjx Adlsd EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: used, Sorvall SLA-1500 We have two pcs in stock, price is for one pc only. Chjdpfx Ajh E Di Ijdled

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring -Roll width: 720 mm -Roller conveyor length: 1500 mm -Roll diameter: 90 mm Cjdpfec N N Hqox Adlohd -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm -Weight: 314 kg

Condition: used, Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1500mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock Codpemch T Tefx Adljhd -Number: 1x workbench available -Price per piece -Weight: 110 kg/pc.

Condition: used, Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.7-5.5 kW -Speed: 190-1500 rpm -Shaft: Ø 38 mm -Construction: B3 Chedpsd Nfdtefx Adlsd -Protection class: IP 22 -external fan -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Codevbqv Hepfx Adlshd Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Acu Rite digital readout Machine lamp Chjdpfxjvq Ibxe Adljd Coolant tank Longitudinal stop Rear chip guard Chuck guard

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor Codpfxstlzfyj Adlehd -Manufacturer: Grenzebach, roller conveyor type RFS with lifting unit -Drive motor: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Lifting unit: 1270 x 600 mm / see photos -Number: 1x roller conveyor available -Dimensions: 1700/1500/H680 mm -Weight: 332 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm Cjdpfxetlzglj Adljhd -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1700/1440/H750 mm -Weight: 240 kg