Used Atlas 1605 M for sale (449)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification Iaodpfxjxbd Ras Anvsu 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Iaodsxc Uv Aspfx Anvsu

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Iodpjl Tn Epefx Anvsau

Year of construction: 2020, condition: new, machine/vehicle number: 311345882, Atlas Copco Secoroc DTH drill pipe 102 114mm unused Iaedpfsmwittsx Anvsu 4x 102mm / L= 5000mm 4x 114mm / L= 6000mm 3x shank adapters 114mm 1x drill bit 140mm Additional information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 • Max. operating pressure: 8.8 bar • Power: 822 kW • Speed: 2980 rpm • Serial number: S88668802 • Design: oil-free Iaodpfx Aeyi H Ekenvsu • Quantity: two units available Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: used, functionality: unexamined, machine/vehicle number: ETD MT41, Used Atlas Copco ETD MT41 electric torque screwdriver (Transducerized MicroTorque Driver) Iasdpfx Ansynhpbjveu Manufacturer: Atlas Copco Model: ETD MT41-150-i06 In original packaging. Multiple units in stock.

Condition: reconditioned (used), functionality: fully functional, operation weight: 200 kg, Year of construction: 2022, Equipment: hydraulics, EPIROC SB 202 hydraulic breaker overhauled With Lehnhoff MS03 mounting plate Hydraulic hoses with couplings and 1x point chisel Operating weight 200 kg Oil flow 35 l/min - 65 l/min Operating pressure 100 bar - 150 bar Ijdsttv Sxspfx Anvoau Impact frequency 850 - 1800 impacts/min Diameter of insertion tool 65 mm Working length of the tool 300 mm Carrier weight class 2.5 t - 6 t Hydraulic input power, max. 17 kW Guaranteed sound power level 118 dB

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Iedpfx Ajp N H Huonveau Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: ready for operation (used), functionality: fully functional, power: 114 kW (155.00 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 25 kg, tire condition: 50 %, axle configuration: 2 axles, number of seats: 1, Year of construction: 2015, operating hours: 8,454 h, machine/vehicle number: 250M301296, Equipment: UVV, additional headlights, air conditioning, cabin, crane, hydraulics, trailer coupling, 6.20 + 4.80 m incl. generator Sorting grab Iedstucngspfx Anvsau Polyp grab Lifting magnet all with quick coupler also available: Atlas 230MH | 2011 | 6.80 + 5.00 | Polyp grab Liebherr A904C | 2011 | 6.60 + 5.00 | Polyp grab

Condition: used, color: red, Year of construction: 1981, operating hours: 4,391 h, Tank pressure: 11 bar Iedpfxox S Nxaj Anvsau

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Technical condition: very good Ijdpfx Anjxykvasvoau Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 2x0,7x0,6 Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Ijdpfx Aevpq Tbsnveau Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Iajdpfx Anovpq Thjvju Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 2x0,7x0,6 Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer VIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 HP * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R pneumatic mole * Compressed air hose * Hose reel Compressor with power generator ATLAS COPCO XAS 58-7, Registered: 11/2023 Equipment: Construction compressor Atlas Copco MCT type XAS 58-7 G, with integrated power generator 6kVA Sockets: 2 x 360V / 1 x auxiliary circuit, unbraked, height adjustable, initial oil fill, lifting eye, enclosed drip tray, Starter Motor Protection (SMP), overrun and parking brake, automatic reversing system, jockey wheel, support leg (unbraked version), HGV DIN towing eye (400mm), lighting in accordance with German road traffic regulations (StVZO), included: Atlas Copco pneumatic hammer type TEX 10 PSKL, weight: 10.7 kg Pneumatic hammer TEX 230 PE, weight: 27 kg Various pointed and flat chisels, asphalt spade 115 mm wide TERRA-Hammer TU055R, TERRA compressed air hose approx. 15,000 mm long, TERRA oiler RRP: complete with accessories €28,000 net * New main inspections / safety checks or weight reductions/increases are possible upon request. We are happy to assist in obtaining export/temporary registration plates, as well as in transporting your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! Iedpfjy Rv Ilox Anvoau No liability for printing or typographical errors, changes, interim sale, or mistakes excepted! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm, we offer a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person, who will assist you with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are pleased to help you organize special transports. Temporary/export license plates We are happy to assist you in obtaining export/temporary license plates. Handling customs formalities

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer VIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 breaker * TEX 10PSKL breaker * TERRA Hammer TU 055R ground rocket * Compressed air hose * Hose reel Compressor with generator ATLAS COPCO XAS 58-7 Registered: 11/2023 Equipment: Construction compressor Atlas Copco MCT type XAS 58-7 G, with integrated generator 6kVA Outlets: 2 x 360V / 1 x, unbraked drawbar, height adjustable, initial oil fill, lifting eye, closed pan base, starter motor protection SMP, overrun brake & handbrake, auto-reverse, jockey wheel, support foot (unbraked version), truck DIN towing eye (400 mm), lighting as per StVZO, included: - Pneumatic breaker Atlas Copco TEX 10 PSKL, weight: 10.7 kg - Pneumatic breaker TEX 230 PE, weight: 27 kg - Various pointed and wide chisels, asphalt spade 115 mm wide - TERRA Hammer TU055R, TERRA compressed air hose approx. 15,000 mm long, TERRA oiler, Original price: complete with accessories €28,000 net * New inspections (TÜV) / safety checks, or weight reductions/increases are available on request. We are happy to assist with export/transit license plates. Vehicle delivery within Germany is also possible. Contact us! ---- We speak German, English, and Russian!---- Iajdpfx Ansyai Euovju No liability for printing & typing errors, subject to change, prior sale and mistakes reserved!---- About us: Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is our top priority, which is why we offer our clients an excellent all-round service package and provide a competent contact person to assist you throughout the vehicle purchase or sale process. See for yourself! Our services for you: Vehicle loading: We are happy to assist you with loading your purchased vehicles. Organization of special transports: We are happy to help you with organizing special transports. Temporary/export license plates: We are happy to assist with obtaining export/short-term license plates. Completion of customs formalities.

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Iajdpfx Aoyxy Daenvsu Delivery across Europe can be arranged.

Condition: used, Year of construction: 2021, operating hours: 37,000 h, INVERTER COMPRESSOR GA 75 VSD, IN EXCELLENT CONDITION. THE MACHINE HAS BEEN SERVICED EVERY 4 MONTHS (WE ARE AN OFFICIAL DEALER). NEW PRICE: €96,968. MAIN FEATURES: Gujbryiozdf U Ts Uyloc MAXIMUM PRESSURE: 13 BAR Iedpfx Anezdga Dsvoau POWER: 75 kW / 100 HP FLOW RATE: 13500 LITERS/MINUTE Request further information.

Condition: like new (used), Year of construction: 2022, operating hours: 9,900 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR POWER: 75 kW / 100 HP Ijdpezdf U Tefx Anveau FLOW RATE: 13,500 LITERS/MINUTE

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, Compressor in like-new condition (demonstration unit), only 2000 hours of use. We are an authorized dealer. New list price: €32,074. Main features: Maximum pressure: 10 bar Power: 15 kW / 20 hp Iaedpfx Anjzdf Iyjvsu Flow rate: 2940 liters/min

Condition: like new (used), Year of construction: 2025, operating hours: 3,800 h, Atlas Copco compressor (demonstration unit). Condition is like new. We are an official Atlas Copco dealer. The compressor will be delivered after a full service and will be ready for use. National list price for a new unit is €51,569. Iedpozdf Imofx Anvoau Main features: Max. pressure: 10 bar Power: 30 kW / 40 hp Flow rate: 6540 liters/min

Condition: used, Year of construction: 2014, operating hours: 39,000 h, Atlas Copco compressor, in perfect working order and exceptionally quiet (we are official dealers). Key features: Isdpfozc Hmhox Anvsau Maximum pressure: 10 bar Flow rate: 19200 liters/minute Power: 110 kW / 150 hp

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. Ijdpfx Anowcm Hievjau main features: max bar 10 power 15kw-20hp air flow liters7min 3000 for detailed technical sheet do not hesitate to contact me.

Condition: used, Year of construction: 2007, operating hours: 27,000 h, functionality: fully functional, machine/vehicle number: API454025, Oil-injected rotary screw compressor with integrated refrigerant dryer Iaedpfx Aszd Avaonveu Atlas Copco, model GA 15 FF, year 2007, serial API454025, used ~27 000 h, With Atlas Copco Elektronikon II control unit The unit has been out of production since 2022. Last maintenance performed in the summer of 2019 / 23 460 h When wanted, a compressed air tank can be included. Pmax 7,3 bar – 105 psi Qv 43 l/s – 2,58 m³/min P motor 15 kW – 20 hp Packing and loading on trailer is including to price, Incoterms FOT

Year of construction: 2018, condition: ready for operation (used), Compressor system manufactured in 2018. This Atlas Copco GA15VSD+FF features a motor power of 15 KW and operates at a pressure of 12.75 bar. It includes a 1,000-liter tank, making it suitable for various applications. If you are looking to get high-quality compressed air capabilities, consider the Atlas Copco GA15VSD+FF machine we have for sale. Contact us for further details. • Motor power: 15 kW Iajdpfjzdi Snox Anvou • Pressure: 12.75 bar Additional equipment • 1,000-liter tank included

Condition: excellent (used), Year of construction: 2014, operating hours: 594 h, Field of application: Construction Empty weight: 750 kg Capacity: 5 m³/m Technical condition: very good Visual appearance: very good Drill equipment: Plastic canopy Delivery terms: EXW Working pressure: 7 bar Please contact Vink Machinery for more information Iasdpfx Anezd Af Ijvju = Additional options and accessories = - Plastic canopy