Hydraulic Drill Rig

Atlas Copco Rocket Boomer 352 S-1838

Condition: excellent (used), power: 16,000 kW (21,753.92 HP), fuel type: diesel, overall weight: 14,000 kg, Year of construction: 1998, operating hours: 622 h, output voltage: 400 V, nominal power: 1,600 kW (2,175.39 HP), nominal power (apparent): 2,000 kVA, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, Several identical used power generators in very good condition (fully functional) are for sale with the following details: Nominal power: 2000 kVA / 1600 kW Drive engine: MTU 16V396 Operating hours: approx. 523 hours The control unit has been completely renewed. including batteries Pedpoug I U Eofx Alregl including operating manual including circuit diagram including new maintenance and load test Immediately available, ready for use, fully functional Price: 100,000 net

Condition: used, System: used piston diaphragm pump / pump Psdsdkdi Topfx Alregl Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm Pgodpfxed Iipxs Alrjl band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 1600kVA, voltage ratio 20(2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report, total 2 pcs. Pgjdewpb Emopfx Alrsl

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S year: 1999 Working hours: Reading - hole diameter: max. 385 mm - maximum torque: 2500 kN - tractive force 96 kN - compressive force 65 kN - max. drilling length 250 m - power: 90 kW - drill rods and bits included - complete equipment with separate engine, hydraulic power pack and tank for drilling fluid Pgjdpfjhd I S Usx Alrsl - engine Perkins 119 kW / 162 PS This offer is subject to change, input errors and mistakes excepted. Only the concrete agreements in the order confirmation or in the sales contract are valid. The basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me More Information Intended use: Construction,

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Pgjdpfxey Hrn He Alrsl Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: new, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Pgedpfex A R Hkox Alrol Weights Empty weight: 2.600 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.900 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 95000 m Max swing of arm in degrees: 356 Max swing of platform in degrees: 178 Rental currency: EUR Production country: IT Additional information Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2025, Weights Empty weight: 1.800 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 20-35ton Psdpfx Aljq Ixuverjgl Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you new excavator mounted Pile driver- Pile Hammer, Vibro Pile hammer, Vibratory pile driver, Vibratory Hammer. This model AJCE AVH30 fits on excavator class 20-35 ton. You don't need Power Pack, that will save you money! The weight is 1800kg. It will be delivered together with special extention boom to connect on the excavator. You can see it on the photos. We have also Side Grip type vibrohammers available. Contact us for details. We can ship worldwide. - Vibrofonceur Vibrohammer Piledriver Vibro högförare battipalo возач гомиле conductor de pila pilot hromady cölöpverő Rammbock haugesjåfør bate estaca sonetă ciocan vibro martelo vibro vibrohammer martillo vibratorio vibro marteau Vibrationshammer čekić vibro młot wibracyjny vibro plaktukas вибромолот вибро чук

Year of construction: 2006, operating hours: 2,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Pgedpfx Ajh Tyzislrol Vibrator MR 100 V for RTG Piling rigs inclusive clamp MRZ 105

Condition: new, Year of construction: 2026, A professional folding machine with a 4.14 m working surface, directly from the manufacturer Prod-Masz. Possible sheet thickness to be processed: sheet steel up to 0.7 mm, bending radius: up to 160° to create a fold. The two cheeks are CNC-milled from solid material and ensure a long service life. The machine is solidly made, the weight of the machine is 700kg !!! Pgedpfscgmd Usx Alrol Do you think there is no such company that can bend you? Is! Prod-Masz is your bending specialist! Actually our abant benches! The sheet metal bending machine has a holder for the cut sheet metal at the outlet, a protractor, angle stop and gas pressure damper to slightly position the bending beam in the height. Maximum working width of the press brake: 4140 mm Bending performance: up to 0.7 mm (steel sheet) Bending machine bending angle: 160 degrees Bending beam thickness: 20 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Passage opening: 80 mm degree scale angle stop depth stops Weight of the folding bench: approx. 700 kg The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.