Used Atlas 55 for sale (441)

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Nedpfoydlycsx Aiqowi Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: used, mileage: 1,001 km, first registration: 01/1994, color: orange, driver cabin: other, gearing type: other, Year of construction: 1994, Vehicle location: Bovenden. Superstructure: Grabber with a capacity of approximately 250 liters. Width 500mm, depth 450mm, with rotary servo and teeth. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Nwjdpfei Rqmvsx Aiqji

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 292 h, Exhaust emission stage 5, operating pressure 7.0 bar, flow rate 7.0 m3/min; operating pressure 8.6 bar, flow rate 6.0 m3/min; operating pressure 10.3 bar, flow rate 5.0 m3/min. Nwedpfsznww Hex Aiqei

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Price: 9,000 EUR Nodszhu Naspfx Aiqowi

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Nwjdpfx Aieziizmsqsi Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  - Operating Pressure: 7–8.5 bar Nedpfxeyb Thvj Aiqowi - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Excellent, annual maintenance completed August 2025 - Optional equipment: Atlas Copco air dryer available - Status: Installed and connected, fully functional

Condition: used, Year of construction: 2012, Overview  Nodpfxeyb Thie Aiqjwi This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data  - Operating Pressure: 7–8.5 bar - Air Capacity: 24.1 m³/min - Power Supply: 132 kW - Weight: 4,075 kg - Condition: Fully reconditioned in 2025 (new HMI) - Additional equipment: Optional Atlas Copco air dryer - Status: Installed and connected, fully functional - Availability: Immediate

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  - Application: Air dryer for 7 7-bar low-pressure compressor Nodpfexrnn Dsx Aiqswi - Flow Capacity: 760 L/s - Operating Pressure: Up to 14 bar - Power Supply: 5.6 kW - Refrigerant: R410A - Weight: 380 kg

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Nwodpjxrc Acefx Aiqei - Years of Manufacture: 2009 – 2013 - Application: Industrial compressed air system - Total Capacity: 2 × 24.1 m³/min - Maximum Pressure: 8.5 bar - Power Supply: 274.8 kW Scope of Delivery  - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Air dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Condition: ready for operation (used), Year of construction: 2005, The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible. Njdpfx Aiezmh Uaeqewi

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAHS186 portable compressor, equipped with an end cooler, after a complete service. Technical data: capacity: 10.50 m3/min; working pressure: 12 Bar; year of manufacture: 2015; DEUTZ engine, 104 kW; mileage: 2016 hours. The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 109,500 PLN Gross price: 134,685 PLN The machine was imported in perfect condition and has all the necessary documents for registration. Nwsdezk Amxopfx Aiqoi Links to videos are provided below.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 Nedpfjzky Nkox Aiqewi engine: KUBOTA operating hours: 2000 h compressor in perfect working order, ready for operation, with warranty. net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Nwedpfx Aswlp Hdoiqsi Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm Nedpfjgrzvkox Aiqswi -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Nsdpfx Aijfbnkajqowi -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm Nsdpfx Aefbmu Seiqswi -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm Nwjdpfx Ajd N Rt Djiqoi -Weight: 27 kg

Year of construction: 2005, condition: used, Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm -Own weight: 2.6 kg Nwedpogggy Esfx Aiqji

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Nwsdpfxogr E R Us Aiqsi -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated Nwsdohabk Dspfx Aiqei -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: good (used), Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium Nodpfx Aijdwf S Usqewi -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Condition: used, Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Contents: 400 l -Opening width: 1400 mm Nwsdpfx Aijx R Sv Esqji -complete: with rotary servo -Mounting bolt: Ø 80 mm -Intermediate mounting dimension: 340 mm -Weight: 700 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm Njdpjb A Sgkjfx Aiqewi -Weight: 18 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm Nwodpfx Aisb A I Insqsi -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm Nwjdpeb A I Rcefx Aiqsi -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg