Used Atlas Ar 80 for sale (464)

Condition: like new (used), Year of construction: 2014, operating hours: 688 h, functionality: fully functional, overall weight: 1,500 kg, total length: 3,000 mm, total width: 750 mm, total height: 1,440 mm, power: 8 kW (10.88 HP), fuel type: electric, operating pressure: 32 bar, pressure (min.): 15 bar, pressure (max.): 32 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Ponúkam na predaj plne funkčný vysokotlakový kompresor ATLAS COPCO, typ LT7 – 30UV BM, 32 bar, 5,16 kW, namontovaný na robustnej kovovej konštrukcii (C profily). Dá sa nastaviť aj ako nizkotlakový od 15 bar. Doprava dohodou, ideálny osobný odber. Súčasť zariadenia: - sušička vzduchu Donaldson ultrafilter - 100 l vzdušník Drukov - SPX filtre - zariadenia na odvod kondenzátu - elektrický rozvádzač - kompletná dokumentácia Stav a údržba: - 688 motohodín - profesionálny servis od ATLAS COPCO v roku 2024 - od servisu iba kontrolné spustenia - plne funkčný stav s výzorom ako nový Technické údaje: - pripojenie: 400 V / 32 A zásuvka - rozmery zostavy: cca 3000 × 750 × 1400 mm (d × š × v) Lrsdpox Stg Isfx Adwsg Pôvodná cena: 21860€ bez DPH Cena: 4900€ bez DPH (Viac informácií a fotografie na vyžiadanie)

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Lrjdpfx Ashpx U Asdweg

Condition: good (used), functionality: fully functional, overall weight: 6,280 kg, empty load weight: 5,760 kg, Year of construction: 2014, operating hours: 3,100 h, Equipment: all wheel drive, cabin, pallet forks, standard shovel, trailer coupling, Atlas 75e wheel loader including forks and bucket, in clean condition and immediately ready for use. The display was replaced by Atlas in 2023 at approximately 2,700 operating hours; the current display shows 460 operating hours. Total hours approx. 3,100. Transport and delivery possible. Viewing by appointment, also possible on weekends. Lrsdpjyacylefx Adweg

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2014, operating hours: 3,500 h, Atlas Copco XAS97 Compressor – 2750 rpm – 7 Bar – 36 kW – Weight 1060 kg – = Further Information = Year of manufacture: 2014 Intended use: Construction Contact Miguel Cubas for more information. Ljdpfsya I Afox Adwjrg = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the Port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Lodpfx Ajxc Uv Asdwsrg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD Year of manufacture: 2013 Stepless speed control Lodpfx Asx U D Smjdwsrg Operating hours: approx. 46,980 h Power: 30 kW Air flow: 5.58 m³/min Weight: 530 kg Max pressure: 13 bar

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD+ Year of manufacture: 2014 Speed: steplessly controlled Operating hours: approx. 59,880 h Power: 30 kW Volume flow: 5.58 m³/min Weight: 380 kg Max pressure: 13 bar Ledpfx Adjx U D Rpjwjrg

Condition: excellent (used), Year of construction: 2007, operating hours: 60,649 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZT90VSDFF. Integrated frequency converter and drum dryer. 90 kW with 8.75 bar and 15.50 m3/min. High-pressure element replaced in 2013. Lrjdpfx Ajx Nm Itsdwog

Condition: used, Year of construction: 2002, operating hours: 15,152 h, Equipment: all wheel drive, * Pallet fork & bucket Lrsdpfjtrqk Rjx Adwog * Enclosed cab * Front hydraulics * Engine power: 74 kW * Year of manufacture: 2002 * Work lights ----Internal vehicle number 9531----Errors & interim sale excepted WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Lodpfx Ajv Snn Iedwsrg Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.

Condition: excellent (used), Year of construction: 2018, operating hours: 17,555 h, functionality: fully functional, Atlas Copco GA110VSD screw compressor. 110 kW with 8.5 bar and 21.60 m³/min. Integrated frequency converter. Lredpfxex Iu H Uo Adwjg

Condition: excellent (used), Year of construction: 2012, operating hours: 35,741 h, functionality: fully functional, Screw compressor Atlas Copco GA15VSDFF. Integrated dryer and inverter. 15 kW, 13 bar, 2.91 m3/min. Lsdpfxox Igzks Adwerg

Condition: good (used), Year of construction: 2013, Atlas Copco compressor used Type: GG-90-VSD Power: 62kW Year of manufacture: 2013 Please only view by telephone arrangement! Lodpfxotu Uhme Adwerg Preferred sale to dealers, traders or exporters. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course, we also take care of all formalities Loading possible

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm Lodob A I Inspfx Adwsrg -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm Lrjdpeb A I Rcsfx Adwog -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) Lodpfew Thykjx Adworg - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: like new (used), Here we offer you a weathering tester. The Xenotest Beta+ is a high quality xenon device with a rotating sample carousel and an exposure area of 4000 cm². It has a complete set of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Its large test chamber and high reliability make it ideal for larger test volumes or sample sizes. - 3x 2200 W air-cooled xenon lamps - 4000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) - Touch screen with color display for monitoring and displaying test parameters - Direct setting and control of irradiance (300-400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Display of diagnostic messages - Memory for 10 user-defined test methods - Preprogrammed international standard test methods - Multilingual user interface - Non-aging XENOCHROME filters to simulate daylight outdoors, Daylight behind windows - On-rack XENOSENSIVE 300-400 nm for measurement and control of irradiance (in W/m2) and BST (°C) at sample level - Selectable temperature control either via chamber air temperature (max. 70 °C) or via Dual control: chamber air temperature and Schwarz standard temperature (up to 130 °C) - Fan-controlled temperature difference between chamber and black standard temperature - Ultrasonic humidification system for humidity control - Sample spray system with integrated 60 liter water reservoir - Outer cylinder made of special UV glass - Shutdown after irradiation amount, exposure time or total operating time - Advanced auto-start functions - Data output via memory card or RS 232 interface Ledpfx Adjihfrrewerg - Ethernet interface for connection to internal computer network and use of of XenoTouch Add-Ons 1, 2 and 3 (remote control, e-mail service, online monitoring) Dimensions Width x depth x height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Atlas Type: Xenotest Alpha LM High Energy Weathering tester Atlas Xenotest Alpha LM is a universal weathering instrument for testing the lightfastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOCHROME Filter XENOSENSIV gearbox Control of lamp power in W/m² Sample chamber temperature controlled up to 70 degrees Measuring sensors at sample level XENOSENSIV E(300-400 nm) and SST Stationary sensor for sample chamber temperature and relative humidity Humidification Irrigation Water supply with integrated water tank Electronic version: 230V, 50/60Hz Absorption filter 7 IR: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Window glass 10 FG: Synchronization 40 - 110 W/m² Coil run 21 - 57 W/m² Absorption filter 4 IR + 3 window glass: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Absorption filter 6 IR + 1 UV: Synchronization 40 - 140 W/m² Coil run 21 - 72 W/m² Rel. electrical power without XENOSENSIV sensor: continuously regulated to the set value 53 - 120 % Sample chamber temperature: 20 - 70° (depending on selected filter configuration) Black standard temperature: synchronized 25 - 130 °C coiled 25 - 100 °C Relative humidity: 10 % - 95 % Fan revolutions: 500 - 2500 rpm Dimensions: 900 x 780 x 1800 mm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Lsdpfx Aouuaryodwjrg

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/ Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hrs. Light duration device 647.4 hrs. Total lamp operation 88.9 hrs. Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. The 3000 series is CE, UL, CSA, ISO and EN certified. Key features of this device include: a rotating sample basket to maximize the homogeneity of all samples; customized nozzles for uniform sample front and back spraying; ASTM black plate thermometer or ISO/DIN black standard thermometer for control and monitoring, temperature at sample level to ensure test repeatability. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) 12-inch TFT full-color touchscreen control panel - display of all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory pre-programmed test methods (Weather-Ometer); 6 factory pre-programmed test methods (Fade-Ometer) Features: Climate type Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Lrodpfjtq Em Eox Adwog We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Lredpeg Dglyefx Adwsg Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Lsdpjucd Rbsfx Adwerg Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software Lodpjhabk Defx Adworg -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: used, mileage: 1 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 1.480 kg Ledsx R T Tlspfx Adworg Please contact Emal Jaweed for more information

Condition: used, power: 74 kW (100.61 HP), Year of construction: 2011, operating hours: 3,926 h, Empty weight: 8.350 kg Ljdpfx Asx R T Ntodwerg Please contact Emal Jaweed for more information

Year of construction: 1995, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Ljdjx R T Hljpfx Adwsrg Empty weight: 1 kg Please contact Emal Jaweed for more information