Used Atlas Crane for sale (475)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Iedpfx Abexbd Ras Ija Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Iodpfx Aemzbdwsb Ioa

Condition: good (used), Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA22 FF SERIAL NUMBER: AII239418 YEAR: 1998 POWER (kW): 22 CAPACITY (m3/min): 3.22 PRESSURE (bar): 7.5 OPERATING HOURS (LOAD/TOTAL): 30369/40059 Ijdpexyarqsfx Ab Iea FREQUENCY INVERTER: no BUILT-IN DRYER: yes – R134a 0.95kg HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Ijdpfx Aotplq Iob Iea Year of construction: 2006 Engine power: 114 KW hammer piping, air conditioning, quick coupler

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 009439, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4.43 m³/h, pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, We are selling a screw compressor that was purchased in 2023. The compressor has been rarely used, is fully functional, and is available for collection. Isdpfexxipiex Ab Ioa

Condition: excellent (used), Year of construction: 2014, operating hours: 23,681 h, functionality: fully functional, Second-hand screw compressor Atlas Copco GA55+. 55 kW with 10 bar and 9.39 m³/min. Year of manufacture: 2014 Iodsxu T Etspfx Ab Ioa

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Ijdpfx Asd Dtn Ueb Isa Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L Ijdsxl Hxbopfx Ab Isa

Condition: used, Year of construction: 2009, MANUFACTURER: ATLASCOPCO MODEL: GA75 VSD SERIAL NUMBER: API656533 YEAR: 2009 POWER (kW): 75 CAPACITY (m3/min): 14.68 PRESSURE (bar): 13 Iodpfx Aexxm Atsb Ioa

Condition: excellent (used), Year of construction: 2008, operating hours: 6,000 h, functionality: fully functional, overall weight: 372 kg, power: 11 kW (14.96 HP), For Sale: Atlas Copco GA11C 11 kW Screw Compressor (2008) Clean and reliable Atlas Copco GA11C industrial air compressor. A solid oil-injected rotary screw unit, ideal for workshops, small manufacturing facilities, and anyone needing consistent and dependable compressed air. Technical specifications (from nameplate): Model: GA11C Year of manufacture: 2008 Ijdpfx Absxw R Rrs Ioa Maximum pressure: 8.3 bar (0.83 MPa) / 120 psi Air delivery: 26.5 l/s (1.59 m³/min) – 56.1 cfm Motor power: 11 kW / 15 hp Speed: 2940 rpm Weight: 372 kg (820 lb) Manufactured in: Belgium This unit comes from Atlas Copco’s Airpower series known for reliability, efficiency, and long service life. Its capacity and pressure level make it suitable for powering various machines and tools such as press brakes, shears, CNC machines, welding stations, and general workshop air systems. Condition: Good working condition. Runs smoothly. Operating hours can be checked on site. Ideal for: Workshops Metal fabrication shops Auto repair facilities Small production lines Secondary or backup compressor use

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening excavated material for storage or transport. The machine is used in the following works: - on railway and tram tracks - maintenance and track-related works - earth and road works Manufacturer: ATLAS Model: 1604 KZW Year of production: 2003 Own weight: 22,000 kg Dimensions: 5.9x2.5 m, h: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heating - three-fold arm - front and rear hitch - additional output for a pneumatic hammer Iedpfshutkfox Ab Ija - reversing camera - four hydraulic side supports - Joystick control Technical condition: used, functional

Condition: like new (used), Year of construction: 2021, Model G15 FF Main motor power: 15.0 kW Tank capacity: 500 L Built-in dryer Electronic control of compressor operating parameters Iedpsw Ev Eyofx Ab Isa Weight: 340 kg Year of manufacture: 2021 Complies with CE standards

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, Second hand compressor Atlas Copco GA30VSD+FF. Integrated dryer. Integrated frequency converter. 30 kW. 13 bar. 5.85 m³/min. Ijdpfx Absxu Ibcj Isa

Year of construction: 2016, operating hours: 68,000 h, condition: used, Serial number: CAI72xxxx Please contact ATS Norway for more information Iodpfx Abjxu A Eis Ioa Please provide reference number upon request: 20523 Specifications: Model year: 2016 Hours: Approx . 68,000 Voltage: 400V Maximum pressure: 8.25 bar Weight: 360 kg Condition: Ready for delivery Description: The compressor is from 2016 and has run for approximately 68,000 hours . Ready for immediate delivery. Hours: 68000 Total Weight: 360

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO MODEL: ZT18 Iodpjxxb Evefx Ab Isa SERIAL NO.: AII702327 YEAR: 2003 POWER (kW): 18.5 CAPACITY (m3/min): 2.51 PRESSURE (bar): 8.6

Condition: used, ATLAS COPCO 1616.6512.81 screw compressor stage. We can perform a general overhaul upon request. Ijdpfxsxw Nxbj Ab Ija

Year of construction: 2020, condition: new, Field of application: Construction Iodpfon Tm A Tox Ab Ioa Attachment suited for: Loaders Selling price: € 100, US$ 105,9 Galen Group is very experienced in delivering custom solutions to the underground mining industry. No matter the need, Galen’s experienced design, engineering and manufacturing teams deliver the solution that is right for you. More heavily guarded underground mining buckets designed for corrosive mining materials. For the entire underground loader line, Galen Ground Engaging Tools system now offers bolt on half arrow ground engaging tools (GET) for bucket edges. The system is designed for high abrasion applications where weld-on GET experience high wear rates. With the retention system, the bolt-on GET offer more wear material than standard weld-on GET, and the bolt-on design enables quick removal and replacement. Despite additional wear material, the low-profile front edge eases pile penetration and promotes fast bucket loading.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: API801175, Item number MA1131 Manufacturer Atlas Copco Type AQ22VSD Year of manufacture 2017 Machine no. API801175 Length [mm] 2000 Width [mm] 1050 Height [mm] 1500 Ijdoh Ed S Sopfx Ab Isa Weight [kg] 800 Connected load 380 V / Operating hours [h] As new 76 operating hours Gear [rpm] 6700 Equipment The compressor is water-cooled and the air is absolutely oil-free Operating instructions ,New price 56350€, special price 27500€

Condition: used, Year of construction: 2002, operating hours: 15,152 h, Equipment: all wheel drive, * Pallet fork & shovel * Closed cabin * Front hydraulics Isdpfx Abstrqk Re Ioa * Engine power 74kW * Year of manufacture: 2002 * Work lights ----Internal vehicle number 9531----Subject to errors and prior sale

Year of construction: 1994, operating hours: 34,200 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20522 Specifications: Year of production: 1994 Ijdpfxexu A Eco Ab Iea Hours : Approximately 34,200 Voltage: 400V Condition: Works as it should Delivery status: Ready for delivery Description: The compressor was produced in 1994 and has run approximately 34,200 hours . It works as it should and is ready for immediate delivery. Hours: 34200

Condition: excellent (used), Year of construction: 2014, operating hours: 43,303 h, functionality: fully functional, Oil-free screw compressor ZT250. Isdpjxt Ralofx Ab Isa Year of manufacture: 2014 250 kW 7.5 bar with 42.31 m³/min.

Condition: used, mileage: 1,001 km, first registration: 01/1993, color: black, driver cabin: other, gearing type: other, Year of construction: 1993, Vehicle location: Bovenden, Body: Atlas roll-off system type 122 with articulated arm for containers up to 5.5m Dismantling of MAN 18.232 4x2 BB with a wheelbase of 4500mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iedsi Rk Npjpfx Ab Iea - .

Condition: excellent (used), Year of construction: 2004, operating hours: 1,14,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters Isdpsrp D Uxofx Ab Isa machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), volume flow: 1.56 m³/h, noise level: 65 dB, Equipment: documentation/manual, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2002.3. Isdsrn S Hpspfx Ab Isa Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: like new (used), Year of construction: 2021, operating hours: 745 h, functionality: fully functional, overall weight: 191 kg, power: 5 kW (6.80 HP), fuel type: electric, fuel tank capacity: 270 l, volume flow: 42 m³/h, operating pressure: 10 bar, type of cooling: air, Equipment: type plate available, ATLAS COPCO LE7-10UV 2-cylinder piston compressor for sale in new condition manufacturer ATLAS COPCO Type: LE7 – 10UV TM270 400/3/50 CE Year of manufacture: 2021 hours of operation: 750h tank: 270 liters Maximum pressure: 10 bar Air delivery: 11.7 l/s (liters/second) ≈ 24.8 cfm Weight: 191 kg Power: 5.15 kW (7 HP) Ijdpfjw Nygbsx Ab Isa Power supply: 400 V / 3 phases / 50 Hz Speed: 1500 1/min