Used Austria for sale (1,064)

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds Nwodpfx Aj Afaugjiron the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Nwedpfxoztn Dzj Airsn Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 Nedpfxszaq Iks Airjwn • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: ready for operation (used), * Brand: SBM Austria * Model: hopper with vibrating chute and screening machine Nwsdpfx Asywm Rdjirsn * Type: Grizzly * Dim. hopper: 6000 x 2500 x 1000 mm * Vibrating chute: length 3500 mm - width 1200 mm. * Driving: 2 pieces vibration motors of each 3,5 kW. * Surface screen: 2200 x 1200 mm. * Driving: 11 kW E-motor.

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Nwjdpfsz Rzh Hex Airon Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with C-axis – FANUC 0i-TF, 4,393 hours, like new condition! Includes a parts collection system for removing finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of Manufacture: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel Nedpszkhuhofx Airjwn • Operating Hours: 4,393 h (see image 263.599 minutes = 4,393 h) • Machine Type: Single-spindle with parts collection system • Number of tool positions: 12-position VDI-30 axial turret with two bolt circles • Number of axes: 3 (X/Z/C) • Condition: Like new, fully functional • Location: Graz • Availability: Immediately available ex-stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center EMCO EMCOTURN E45 from 2021 with low operating hours of only 4,393 hours, in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming including handwheel • Parts collection system: The parts collection system (parts receiver) of the Emco Emcoturn E45 gently transports finished workpieces out of the machining area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret changing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swing diameter over bed: 430 mm • Swing diameter over cross slide: 300 mm • Distance between centers (spindle nose - tailstock center): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm • Resolution of the C-axis: 0.001 degrees Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque on the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two bolt circles • Shank according to VDI (DIN 69880): VDI 30 • Tool section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret changing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of supply & terms of sale: • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on-site is included. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: used, Year of construction: 2013, Block bandsaw CTR710M, year 2013, 12 m cutting length, incl. LG automatic feeder and scorer, 6 kW, 550 kg Nwsdexlng Tspfx Airen

Condition: used, Year of construction: 2013, WEEKE OPTIMAT ABD 150, manufactured in 2013. CNC-controlled drilling, gluing, and dowel insertion machine for furniture components. Equipment: - 3 individually controlled vertical drilling spindles, spacing 32 mm - 3 individually controlled horizontal drilling spindles, spacing 32 mm - Gluing unit with adjustable glue quantity Nwodpo Afawbsfx Airjn - Dowel insertion unit for standard dowels 8 x 30 mm / 8 x 35 mm - Automatic dowel feed via vibration feeder - 4 upper clamping cylinders - Left, right, and center workpiece stops - Automatic central oil lubrication - powerControl with woodWOP and ABDWork Workpiece range: Length 20–1,250 mm, width 100–800 mm, thickness 10–60 mm. The machine is located in the TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). The original photos show the machine in its previous location. Inspection, functional testing, and detailed information on the scope of delivery are available by appointment. Price on request. Offer includes free loading onto a truck. Transport is subject to separate agreement. High-quality machines sourced from Germany, Austria, or Switzerland. Consulting and sales handled by DS-Maschinen in Stuttgart. PC and software as shown in the original photos: woodWOP 6.1; Microsoft Windows XP Embedded, Version 2002, Service Pack 3; Beckhoff C9900-I374 v1.1. Counter photo: Total operating time 24,701.5 h, production time approx. 1,806 h. The values refer to different types of counters and the status of the available recording.

Condition: used, mileage: 4,73,786 km, power: 228 kW (309.99 HP), first registration: 02/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, wheelbase: 5,100 mm, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, CERTIFIED PRE-OWNED, Standard model, color: Moss Green IC 099, permissible total weight: 18,000 kg, fabric seats, leaf spring air suspension. Errors and omissions excepted. Sale only to commercial customers. Nwjdpfx Aieza Npterjn

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Fastening material Njdpoz Nm A Tefx Airewn High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN

Condition: used, Year of construction: 2014, operating hours: 3,473 h, fuel type: diesel, MOFFET M4 25.3 PIGGYBACK FORKLIFT - 2.5T - DUPLEX MAST ----VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST ----Vehicle Data: Manufacturer: Moffett / Cargotec Ireland Ltd. * Type: M4 25.3 * Year of Manufacture: 04/2014 * Serial Number: N150234 * Operating Hours: approx. 3,473 h * Tare Weight: 2,200 kg * Load Capacity: 2,500 kg * Load Center: 600 mm Drive: Diesel Engine * hydrostatic drive, as far as can be determined on the unit * 3-wheel chassis * off-road design Lifting Mast: Duplex Mast * hydraulic lifting mast * Lifting Height: approx. 4 m * robust mast guidance * fork carriage Fork Equipment: Fork Tines * hydraulic fork carriage * Reach Forks / Telescopic Forks according to documentation * MSE KOOI ReachForks * Type RE * Serial Number 1430060 Hydraulics: hydraulic lifting function * hydraulic mast operation * hydraulic control functions at the driver's seat * additional hydraulic functions on the fork carriage, as far as can be seen in the pictures Chassis: 3-wheel concept * large, lugged tires * tires suitable for off-road use * compact piggyback forklift design * lateral support/wheel arm design Driver's Seat: open cab * driver's seat * seatbelt * steering wheel * control levers for hydraulic functions * instrument/control display * hour meter Lighting: front headlights * rear lights * turn signals / position lights * rotating beacon Safety: driver protection frame * seatbelt * warning lights * acoustic warning device * CE marking * Sound power level 107 dB LWA * Declaration of Conformity available Design / Application: Piggyback Forklift * suitable for truck mounting * compact design * suitable for construction sites and off-road use * laterally transportable / foldable chassis design Tires: lugged industrial tires * off-road profile * varying states of wear visible * tread partially still present Condition: used, overall condition * signs of wear and tear due to age and use * paint damage present * signs of rust / surface corrosion * fork tines with signs of wear Documentation: CE marking * Declaration of Conformity for ReachForks available * nameplate available ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIA PLATES EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS ARE ONLY POSSIBLE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries will be levied deposit/guarantee of at least € 500.00 / € 1000.00) Nwedjzz Ed Iopfx Airen Subject to changes, errors and prior sale! More vehicles can be found on our Sales are exclusively subject to our terms and conditions - see homepage Important Note - Important Information: Despite careful checking of all details in our offer, it may happen that errors creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore,

Condition: excellent (used), Year of construction: 2010, MaXXturn 65 SMY (Siemens) CNC TURNING CENTER FOR COMPLETE Nedez Sq Sdspfx Airown MACHINING WITH POWERED TOOLS, C-AXIS, AND Y-AXIS Linear guide system, digital drive system. Spindle motor (ISM) on the main and counter spindle with thermal compensation system (liquid-cooled). State-of-the-art control technology SINUMERIK 840D with ShopTurn dialog programming. Main spindle: A2-6" connection (DIN 55026) * Drive power: 29 kW * Speed range: 0-5000 rpm Counter spindle: A2-6" connection (DIN 55026) * Drive power: 22 kW * Speed range: 0-7000 rpm Tool system: * 12-position tool turret VDI 30 radial, with direction logic for up to 12 powered tools * Power: max. 6.7 kW * Torque: max. 25 Nm * Speed range: 0-5000 rpm * C-axis on the main and counter spindle Y-axis: * Travel range: +/- 40 mm * Rapid traverse speed: 12 m/min Includes: * Coolant unit for spindle head * Hollow chuck incl. draw rod * Sinumerika 840D/PCU20 control * SHOPTURN dialog programming * RS 232 interface * Machine light * Coolant system incl. coolant pump 3.5 bar * Chuck flushing (additional pump (3.5 bar)) * Part ejector and flushing through the counter spindle * Control cabinet air conditioning * Hydraulic unit * Interface for chip conveyor * Documentation * CE certificate Machine no. S6AY1202 Year of manufacture: 2010

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 838, input voltage: 400 V, LINDNER MS2000 CRUSHER – 90 kW – 2001 Industrial single-shaft crusher LINDNER MS2000 for sale, used in the recycling process. Nwjdpfx Aez Ryyhjirsn The machine is in full working order and is currently operating on a production line. It can be inspected while in operation. Technical data: Manufacturer: Lindner Recyclingtech Model: MS2000 Year of manufacture: 2001 Power: 90 kW Power supply: 400 V / 50 Hz Serial number: 638 Type: single-shaft crusher Working length of the rotor: approx. 2000 mm Rotor diameter: approx. 550–560 mm Rotor speed: approx. 80 rpm Country of origin: Austria Condition: fully functional, in operation The machine is equipped with an industrial shredding system with rotor knives and counter knives. It is designed for shredding waste materials in recycling plants. The crusher is operational and continues to work on the production line. Inspection and testing are possible before purchase.

Condition: used, mileage: 4,03,362 km, power: 338 kW (459.55 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,700 mm, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: air conditioning, cruise control, trailer coupling, Location: Eugendorf, CERTIFIED PRE-OWNED Standard, Color: Moss Green IC 099, permissible total weight: 18,000 kg, air suspension, intarder, trailer coupling: Rockinger, electronic stability program ESP, comfort seat driver/passenger: lumbar support, driver/passenger seat with air suspension, driver's seat height-adjustable, armrest passenger, seat heating driver/passenger, lane keeping assist, multi-function leather steering wheel, lumbar support driver/passenger, roof spoiler: mounted in cab color, exterior mirrors electric and heated, underrun protection: front, sun visor, axle load display, hill start assist, connection plug 1x15-pin, liftable roof, insulated cab, speed limiter: 90 km/h, seat climate control driver, emergency braking assist, suspended cab, air connections (ISO-DuoMatic) on the left on the plate ECOSWITCH, VDI interface for telematics systems, OBU preparation, ECO-Fleet, driving style analysis (DSE) and driver fatigue detection (DAS), ECO-ROLL, ROCKING MODE, air connections (ISO-DuoMatic) on the left on the plate ECOSWITCH, VDI interface for telematics systems, OBU preparation, ECO-Fleet, driving style analysis (DSE) and driver fatigue detection (DAS), ECO-ROLL, ROCKING MODE, errors and changes excepted. Sale only to commercial customers. Nwodpfxj Ad Tz Ro Airsn

Condition: used, Year of construction: 2022, Woodmizer block bandsaw, year 2022, incl. debarker, electric height adjustment, electric feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kg Nodpfx Aexlnf Asirswn

Condition: good (used), machine/vehicle number: 7FBEST10-12046, operating hours: 1,038 h, lifting height: 3,010 mm, free lift: 80 mm, fuel type: electric, mast type: duplex, battery capacity: 420 Ah, battery voltage: 24 V, fork length: 1,200 mm, Year of manufacture: 2017 Lifting capacity: 1.000 kg Maximum passing height: 200,8 cm Technical condition: good Visual appearance: good Njdpfxs Aa H H Es Airewn Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: used, Year of construction: 2015, overall weight: 900 kg, Used dust extraction system Höcker Polytechnik Vacumobil VT350-L, manufactured in 2015. Technical data: Extraction connection: 350 mm Njdpfxo Advdze Airown Nominal flow rate: 6,580 m³/h Maximum flow rate: 8,500 m³/h Motor power: 11 kW Weight: approx. 900 kg The system is located in our warehouse. Inspection and collection by appointment only. Loading and transport can be arranged. Price on request. Contact: DS-Maschinen – owner David Schulz. High-quality machines sourced from Germany, Austria, or Switzerland. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: new, empty load weight: 8,700 kg, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | KRONE SD DA05 Refrigerated Trailer | Carrier Vector HE 19 Austria Edition #02/50 | Krone axles with disc brakes | Tool box | Temperature recorder | Electrical connection | Spare wheel holder | Pallet box | Meat cooler | Lift axle | New vehicle | Subject to errors, input errors, and prior sale. Nwjdpfszpbuxsx Airjn

Condition: good (used), Alphashot 360 – Professional 360° Product Photography System For sale is an Alphashot 360, a professional, automated photo studio for creating high-quality product images and interactive 360° product views. This system is ideal for companies in the e-commerce, online retail, product photography, and marketing sectors. Product description: The Alphashot 360 enables efficient and standardized product photography with uniform lighting and automated capture from various perspectives. Thanks to the integrated turntable, products can be photographed automatically from different angles and processed into interactive 360° product views. Features and Benefits: - Automated 360° product photography - Integrated motorized turntable - Professional, uniform product lighting - Creation of high-quality product images for online shops and catalogs - Reproducible shooting conditions - Efficient photography of larger product quantities - Suitable for e-commerce, marketing, and product presentations Technical Specifications: - Manufacturer: Alphashot - Model: Alphashot 360 - Machine Type: Automated Product Photography System - Application Area: Product Photography / 360° Photography - Condition: Used - Location: Vienna, Austria Nwjdpfx Aj Abilajirsn Inspection and Collection: An inspection is possible by prior arrangement. Collection and transport are the responsibility of the buyer. Assistance with organizing transport is possible upon request. Further Information: If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, mileage: 34,200 km, power: 100 kW (135.96 HP), first registration: 10/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,109 mm, total width: 2,010 mm, total height: 2,940 mm, loading space volume: 13 m³, loading space length: 3,540 mm, loading space width: 174 mm, loading space height: 210 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, Iveco Daily 35C14 V MY22, 3520mm wheelbase, L, extra high box van with a 750kg tail lift - large platform. Please feel free to call us to discuss the right body configuration for your needs. Are you looking for a different model, engine, dimensions, or other features? Please contact us. We offer financing and leasing at attractive rates – also for the Netherlands, Austria, and start-up companies! ----Vehicle: IVECO Daily 35C14V 3520mm L Extra High * 136 hp (100 kW) Euro 6d diesel * 6-speed manual transmission * Rear-wheel drive * 3,520 mm wheelbase * Long wheelbase / long rear overhang * H3 extra-high roof * Weight variant 1,900 / 2,600 kg * Trailer load up to 3,500 kg * 90-liter fuel tank * 20-liter AdBlue tank * Rear axle ratio i = 3.917 * Reinforced rear axle suspension * Trapezoidal spring rear axle * Aluminum radiator * Heated fuel filter * 220 A (3,080 W) generator * 12 V / 105 Ah battery * Steel rims * 195/75 R16C tires Interior: Comfortable driver's seat Nwsdpfsza Nrhox Airjn * Co-driver's bench seat with 3-point belt * Comfortable dashboard * Comfortable display * Comfortable noise insulation * Insulated rear wall of the cab * Overhead storage compartment above the cab * Central storage compartment * USB charging port * Adjustable steering column (2 positions) * Grab handle on the A-pillar * Fabric seat covers * Standard headrests * Plastic steering wheel * Electric windows * Tinted windows Comfort: Air conditioning with automatic climate control * Cruise control * HI-Connect radio with navigation * Central locking with remote control * Additional remote key with remote control * Electrically adjustable and heated exterior mirrors Safety & Assistance: ESP * ABS * Driver airbag * Co-driver airbag * Speed limiter 160 km/h * Additional speed limiter * Seatbelt warning system for driver & co-driver * Daytime running lights * First aid kit * Warning triangle * Spare tire Cargo area & body: Wooden floor in the cargo area * Partition to the cargo area * Sliding door on the right * Rear double doors with 260° opening angle * LED lighting in the cargo area (2 lights) * Mud flaps on the rear axle Other: White (IC 194) * Service indicator * Start-stop system * Fuel filler cap on the B-pillar * Side vehicle lettering "Daily" * Dhollandia tail lift * 750 kg load capacity * Spiral cable remote control * 2,000 mm platform Additional extras for the body are available for an additional charge. ----Note: Please call us before your visit? We will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Individual configuration upon request is possible. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are reserved. Best regards, Pimenta Automobile

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, pre-cutting device, ammeter, saw band guide electrically adjustable, LG Automat, irrigation pump with automatic switch-on Nwjdjvw Eb Aspfx Airen Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, mileage: 1,75,500 km, power: 346 kW (470.43 HP), first registration: 11/2021, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, MAN TGS 26.470 BL – RO-RO TIPPING TRAILER – VEHICLE HISTORY * Well-maintained! * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Vehicle Data Manufacturer: MAN * Model: TGS 26.470 * First registration: 17.11.2021 * Emission class: 66DO * Fuel: Diesel * Engine displacement: 12,419 cm³ * Power: 346 kW (470 hp) * Automatic transmission * Mileage: 175,500 km * Operating hours: h Weights & Dimensions Permissible total weight: 26,000 kg * Technically permissible total weight: 28,000 kg * Maximum speed: 90 km/h Chassis & Axles Axle 1* Leaf spring suspension * Tires: 315/80 R22.5 Axle 2* Air suspension * Tires: 315/80 R22.5 Axle 3* Air suspension * Steerable axle * Lift axle * Tires: 315/80 R22.5 Superstructure Ro-Ro Tipper * HYVA container system * Type: LS20.60 S * Year of construction: 11/2021 * Serial number: * Maximum load: 20 t * Maximum working pressure: 350 bar * Max container length 7m * Min. container length 4m Coupling System * Ringfeder trailer coupling Drive & Technology * Auxiliary drive (PTO) * Limiter * Speed adjuster Nsds Afb U Iepfx Airewn Comfort Features Automatic climate control * Heated seats * Navigation system * Electric windows * Heated exterior mirrors * Sunroof (manual) Safety & Assistance Systems ACC adaptive cruise control * Lane keeping assist * Rear view camera * Hill start assist * Differential locks * Rocking mode ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 will be charged. (For sales to the EU and third countries will be levied deposit/guarentee of at least € 500.00 / € 1000.00) Changes, errors and prior sale subject to change! You can find more vehicles on our homepage: Sale is exclusively based on our general terms and conditions – see homepage Important note - Important information: Despite careful checking of all details in our offer, it may happen that errors creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, Year of construction: 2014, operating hours: 11,800 h, Takeuchi TB 295 W Year of manufacture: 2014 Approx. 11,800 operating hours Nedpsz Hix Defx Airjwn Martin Powertilt Hydraulic quick coupler All auxiliary circuits Air conditioning 3 buckets In top condition, as if it had only 5,000 operating hours! Pivot pin has been replaced! Road approval for Austria

Condition: good (used), functionality: fully functional, Year of construction: 2003, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Nwodpfo Acm E Hox Airen Model: TrumaBend V170 Year of manufacture: 2003 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.

Condition: new, The Holzprofi RAS200Best radial arm saw features a compact design for space-saving use in smaller workshops. It is suitable for straight (90°), mitre (0° to 45° left) and bevel cuts (45° left and right) on wood-based panels and solid wood up to 3 m in length. Ideal for use in furniture production and carpentry. It is particularly user-friendly and a versatile addition to the sliding table saw for precise cutting work. Advantages and features: - Versatile: Swivel arm up to 45° to the left and right and tiltable cutting head (0° to 45° to the left, infinitely adjustable) enable a wide range of cutting operations and maximum flexibility. - Safe: Noise-reduced full cover of the saw blade with safety switch, kickback protection, generously dimensioned work table and emergency stop button ensure optimum protection during operation. - Robust: Sturdy steel construction with cast iron arm and base frame. Guides made of hardened, replaceable steel. - Precise: Cutting head runs on 8 ball bearings – for smooth, precise and effortless movement. Delivery without saw blade Nwsdpfx Aiex H Uk Derjn Technical specifications: Saw blade diameter 565 mm Speed ?? 2800 rpm Saw arm rotation +45° - -45° L 45° 280x200, R 45° 470x200 Saw head tilt 0 - 45° Cutting height at 90° 200 mm Cutting height at 45° 135 mm Cutting width 850 mm Table size 1970 x 1285 mm Motor power 5.5 kW S6 (4.5 kW S1) 400 V Weight 360 kg Desired equipment: Laser