Used Auto Edger for sale (6,261)

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws Nwodpfxonygvrj Aa Dsb (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Auto Clean Rotisseries - Multisserie Boosts sales: visual cooking stimulates purchases Speed & capacity: cooks 60 chickens in just 45 minutes Saves time: fully automatic overnight cleaning Grease disposal: grease separator or disposable waste bags Operator-friendly: accessible from three sides Food safety: Cook Correction system ensures product quality Flexibility: can be positioned anywhere in the store thanks to built-in condenser Top Features • Collects grease and liquid waste in disposable bags • Fully automatic cleaning system with integrated detergent and rinse aid dispensers • Intelligent controls for easy, consistent operation • Cook Correction system detects and corrects cooking abnormalities • Versatile cooking: suitable for poultry (parts), pork roast, ribs, lamb, roast beef, pork belly, meatloaf, porchetta, and other proteins Standard Features • Supplied with stand • 12 chicken racks with capacity for up to 60 chickens (1.2 kg each) Nwodpfsxamdaox Aa Djb • 250 programs, each allowing up to 9 steps • Steam generation without boiler, programmable with various steam levels • Multi-purpose baskets available for preparing chicken parts, ribs, etc. Included • 12 chicken racks

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, Nedpfx Aegwct Dsa Dewb - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment Nedpfx Ajir Eubja Dowb - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers Nwodpfx Ajk Talpoa Deb - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc Nodsia Nypopfx Aa Dowb - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table Nwsdpfxjidmpte Aa Dob TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm – unit travel speed adjustment – linear laser – quick blade return Njdpjvntdmofx Aa Djwb – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm Nsdpoma Dkfofx Aa Dswb weight 3000 kg

Condition: used, Edger Saw Weight: 3000 kg, Max cutting height: 800 mm, Max width: 600 mm, Minimal distance between saw blades 55/28, Max 4 sawblades, Sawing speed 0-50 m/min, Nwedpfxev Ni Eis Aa Dsb

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: 220095, Knife number 4/5 Min slitting width(mm) 125 Min crease width(mm) 60 Min Paper Length (mm) 320 Nedpfewrx E Asx Aa Dowb

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Nodpetp H Erjfx Aa Dewb Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: used, axle configuration: 2 axles, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 780 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, color: grey, Equipment: ABS, = Additional options and equipment = - Toolbox Nedpowbzi Njfx Aa Djwb = Notes = New trailer, available immediately. Not yet registered. Equipped with: ROR axles with drum brakes. Air suspension with lift and lower valve. 4 x LED work lights. 2 x LED flashers on the rear frame. 4 sockets for width marker boards. Edge profile with holes, 30 mm diameter every 1000 mm. 2 x 10 stanchion sockets in the side beam. Mounting bracket for winch. Rear storage compartment for ramps, Maximum ramp size: 2400 x 470 x 150 mm Stainless steel box: 1000 x 350 x 500 mm. Hardwood floor. = Further information = Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tires; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Unladen weight: 6,600 kg Payload: 20,600 kg Gross vehicle weight: 27,200 kg Type number: OPRIJ / LOWBED / AUTO / CARA = Company information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We do our best to provide accurate information, but no rights may be derived from the texts provided.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x1950x1500 mm Nwodpfx Aasvz Eh Rj Dob Weight 2500 kg Total power requirement 58,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4600x1000x1550 mm Nwedsvz E Epjpfx Aa Deb Weight 2500 kg Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Total power requirement 0 kw Njdpfx Aasvz Hgbj Dowb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4600x1000x1550 mm Weight 2500 kg Nwodpfx Aajvz E U Ds Djb Total power requirement 8,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3225x1750x1200 mm Nsdpsvz Ezksfx Aa Dowb Weight 1200 kg Total power requirement 16,75 kw

Condition: excellent (used), Year of construction: 1990, I sell the press for glued massive solid wood panels Maweg Hildebrand Euro-Auto Material size 2800X2000 x 120mm 2pcs. vertical pistons hydraulic. 2pcs. horizontal pistons hydraulic. Nwsdpfxog Dvu Ts Aa Dsb Very good condition. Avialable immediately.

Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Nwjdsxa Akpepfx Aa Dsb

Year of construction: 2025, condition: as good as new (ex-display), ADL AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS So that the rectangular section ventilation duct machine is able to produce flat plates and U-shaped and L-shaped pieces without the need for additional use. It can also produce one type of Pittsburgh L-shape Auto Duct. Previously it is equipped with Servo Motor and Servo Reducer, which avoids making errors in measurements. The bender and guillotine are driven by a hydraulic system. Possibility to choose Z-type or trapezoidal ribbing or both in one machine. Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum sewerage: 100x100mm Dimensions: W 2,000mm x D 2,000mm x H 1,500mm Weight: 3,000 kg Power: 2.2 kW servo motor Nsdsfwmqvjpfx Aa Dewb

Year of construction: 2025, condition: new, ADL III 1500 AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS HVAC This rectangular ventilation duct machine is capable of producing flat sheets and U- and L-shaped duct elements without the need for additional programming. It can also produce one type of L-shaped Pittsburgh Bracket. Auto Duct Former is equipped with Servo Motor and Servo Reducer to avoid measurement errors. The bender and guillotine are driven by a hydraulic system. Equipped with two types of ribbing, type Z and trapezoidal. It has a selector to change sheets to 3 sets of uncoilers Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum channel size: 100x100mm Nwsdpsp T Sk Hsfx Aa Dsb Dimensions: W 2,200mm x D 5,000mm x H 1,500mm Weight: 3.000Kg Power: 2.2Kw Servo Motor Decoilers on rails: 3 pcs Plate change selector

Condition: new, Year of construction: 2024, The DESK-9 straight glass edger is an advanced machine designed for precise grinding and polishing of glass edges. With the ability to process glass with a thickness of 3 to 25 mm, the machine is extremely versatile and universal, suitable for various applications in the glass industry. Equipped with nine spindles, it ensures precise and even finishing of each edge, which translates into high quality of finished products. Thanks to its high power and wide range of processing speeds, the DESK-9 edger is able to cope with the most demanding tasks in a short time, which significantly increases work efficiency. The availability of various control options - manual with an LCD display, simple PLC control using a touch screen and PLC with pneumatic pressure on the polishing spindles - allows the machine to be adapted to the specific needs and preferences of the user, ensuring easy and intuitive operation. This machine is also characterized by high durability and solid construction, which guarantees long-term and reliable operation. The DESK-9 edger is the perfect solution for professionals in the glass industry who value precision, efficiency and the ability to adapt the device to individual needs. Available machine variants: 1. DESK-9_LCD: manual control with LCD display (non-touch) 2. DESK-9_PLC: simple control using PLC 3. DESK-9_PLC+PNEUM: simple control using PLC, pneumatic pressure on polishing spindles (on the last spindle and on bends) Advantages of the machine: • Versatility: Possibility to process a wide range of glass thicknesses (3-25mm), which makes the machine universal and adapted to various applications. Nedpepbbznsfx Aa Dewb • Precision: Nine spindles ensure accurate and even grinding and polishing of glass edges. • Efficiency: Thanks to its high power and wide range of processing speeds (0.5 ~ 6m/min), the machine is able to handle even the most demanding tasks in a short time. • Multi-variant: Availability of various control options (manual, PLC, PLC with PNEUMAT) allows the machine to be adapted to the specific needs and preferences of the user. This machine (DESK-9 with PLC control) is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine work "live"

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 110 mm Max średnica piły: 350 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Culaga Króciec odciągowy: 200 mm Wyłącznik bezpieczeństwa Zasilanie: 380 V Moc silnika głównego: 25 kW Nwodpfjpfarrex Aa Djb Wymiary całkowite: Długość: 2400 mm Szerokość: 1500 mm Wysokość: 2100 mm

Condition: excellent (used), Max material height 120 mm Max material width 700 mm 22 kW motor Nedpfsxciypsx Aa Djwb Two floating saws Hydraulic roller feed, steplessly adjustable