Used Auto Edger for sale (36,098)

Condition: new, power: 100 kW (135.96 HP), fuel type: diesel, emission class: euro6, color: white, Year of construction: 2025, fuel: diesel, Equipment: ABS, UVV, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, ON-BOARD COMPUTER, drive type: all-wheel drive, soot particle filter, windshield wipers with rain sensor, central locking with remote control, heated windshield, sliding door for loading/passenger compartment on the right, tire pressure monitoring system, low emissions according to the Euro 6d emissions standard, load compartment partition without windows, automatic door locking, Power KeyFree start function, audio system: digital radio reception (DAB / DAB +) with 13 multifunction display and SYNC 4, Ford SYNC 4 with AppLink and touchscreen, metal load compartment partition, low emissions according to the Euro 6e emissions standard, electric front windows with quick-down / quick-up control on the driver / passenger side, second key with remote control that can be folded down, induction charging cradle for mobile devices, door unlocking (2 stages) including locking by slamming the door, spare wheel as an emergency wheel, exterior mirrors that can be folded down electrically, anti-lock braking system (ABS), exterior mirrors that can be folded down electrically. adjustable and heated, electric windows, USB interface, traction control, driver's seat armrest, A-pillar grab handle, automatic (8-speed), hill start assist, indicator light integrated in exterior mirror, rubber floor covering in the driver's cab, brake assist, electronic. Stability program, wrong-way driver warning function, electric parking brake, FordPass Connect including eCall, lockable glove compartment, rear wing doors (opening angle 90 degrees), heating with recirculation, intelligent acceleration control, body/structure: box, automatic climate control, fuel tank: 70 liters, LED cargo area light, truck registration, engine: 2.0 liters - 100 kW EcoBlue CAT, fatigue warning, emergency call system, pre-collision system, headlights with automatic dimming, rear mud flaps, front mud flaps, seats in the driver's cab: heated driver and front passenger seats, seats in the driver's cab: driver's seat with lumbar support, seat package 11A: driver's seat (4-way adjustable) - passenger double seat, fabric, lane departure warning system, lane change warning system, start/stop system... Subject to changes, prior sale and errors. Kodowg N Svspfx Aabodu

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Kodpfjhuiwuox Aabjdu

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW Kdjdpjir Eubofx Aabou - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Condition: ready for operation (used), Slab recovery line with below machines: Kodpogwqk Sjfx Aabsdu One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Kodpfxenmv Ras Aabsdu

Condition: used, mileage: 20,000 km, power: 100 kW (135.96 HP), first registration: 02/2024, fuel type: electric, next inspection (TÜV): 02/2027, gearing type: automatic, suspension: other, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, spoiler, traction control, Roadworthy, electric, accident-free, demonstration vehicle, metallic paint, 5-door, front-wheel drive, single owner, start-stop system, green environmental sticker (Euro 4), fabric interior, lithium-ion battery, tire repair kit, distance warning, black, front side airbags, passenger airbag, rear side airbags, front curtain/head airbags, rear curtain/head airbags, LED headlights, automatic light control, rear parking sensors, parking assistance, reversing camera, daytime running lights, LED daytime running lights, emergency brake assist, digital radio, rain sensor, traffic sign recognition, emergency call system, hill-start assist, tire pressure monitoring, traction control, electronic traction system, electric front windows, heated seats, front seat heating, phone connectivity, hands-free system, Bluetooth hands-free, multifunction steering wheel, radio, radio/MP3, MP3 interface, radio/CD, USB port, cabin air filter, foldable exterior mirrors, heated exterior mirrors, auto-dimming mirrors, auto-dimming interior mirror, power steering, electric exterior mirrors, rear headrests, brake assist, speed limiter, ISOFIX child seat mounts, split folding rear seat bench, alloy wheels, center armrest, lane departure warning, drowsiness detection, electric parking brake, automatic transmission Technology Onboard computer Start-stop system Assistants Drowsiness detection Traffic sign recognition Rain sensor Light sensor Emergency brake assistant Hill-start assistant Lane departure warning Distance/collision warning Comfort Features Automatic climate control Power steering Central locking Electric windows Heated seats Electric side mirrors Split folding rear seat Cruise control Park Distance Control Multifunction steering wheel Auto-dimming interior mirror Center armrest Cabin air filter Speed limiter Visibility LED main headlights LED daytime running lights LED taillights Headlight adjustment Heated exterior mirrors Reversing camera Safety ABS Airbag Passenger airbag Immobilizer Side airbags ESP Traction control Kodjxaurljpfx Aabodu

Condition: good (used), SOCO SB-63 Auto CNC Horizontal Hydraulic Tube Bender With Tooling Packages Diameter Of The Bent Pipe (Steel) Ø2.5-63.5mm. Diameter Of The Bent Pipe (Stainless Steel) Ø1.6-63.5mm. Single Travel 2,030mm. Bending Radius 250mm. The Length Of The Pin 3,200mm. Bending Angle 190°. Bending Speed 45°/sec. Feed Speed 700mm/s. Bending Accuracy +/- 0.2°. The Accuracy Of The Positioning Movements +/- 0.15°. Accuracy Of The Feed +/- 0.25°. Main Engine Power 10kW. Number Of Bends Per Pipe 15. Pipe Rotation Speed 120°/s. Weight 2,000kg. Tooling Packages 1 x Tool 1098 - Full Set Of Tools 19.05 x 1.63 x 30 C/L/R, 1 x Tool 1099 - Full Set Of Tools 13/8" x 1.63 x 45 C/L/R. Kdedpfx Aasxc H N Isbsu

Condition: like new (used), 12fill VMP semi auto filling machine Kdsdpfehpqvysx Aabsu semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs Kedpfx Aaok Talpebjdu TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15 Kdjdpfx Aaowwip Ajbju

Condition: reconditioned (used), functionality: fully functional, The used FAVRETTO MB 100 auto surface grinder is a fully CNC-controlled hydraulic surface grinding machine, equipped with a magnetic table measuring 1,000x400mm and a working area of 1,200x500x550mm, with a 380x70mm grinding wheel. The machine features a PCL CNC control, offers various automatic grinding/dressing cycles, a coolant tank with water pump and filtration unit, a TECNOMAGNETE electromagnetic table, and a wheel dresser mounted on the table. The machine has undergone a complete retrofit (including the electrical system and overall compliance upgrade) and has just been reconditioned in all major mechanical parts (Z-axis screw and bearings, lubrication, etc.). Kdsdpfxsw D D A De Aabsu

Condition: ready for operation (used), Year of construction: 2010, A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Kjdpfx Aasuxu Ifsbodu

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 99 mm/s, pressure: 130 bar, wall thickness: 2 mm, working length: 1,920 mm, Equipment: documentation/manual, 32x2mm Semi Automatic NC Tube Bending Machine Kjdpfxsvx D D Ss Aabedu The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are B, BR, BRF. B series makes bending operation automatically. BR series makes bending and rotating operation automatically. BRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for BR and BRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: used, Year of construction: 2017, functionality: unexamined, Ficep Gemini G32HPE gantry auto CNC plasma cutting machine (2017) Kdedpfew Ugkwex Aabou

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Multiblade Edging Machine by FOD Bydgoszcz * DPPA-II-50-E with electronic blade setting. - Production Poland - DTR - fixed sleeve - movable disc with possibility of programming 8 fixed dimensions TECHNICAL PARAMETERS: - cutting height 120 mm - cutting width 500 mm - engine power 30 kW - material width max 730 mm - four types of feed speed - feed motor power 4 kW - spindle diameter 55 mm - sleeve diameter 90 mm - electronic blade spacing adjustment with programmable fixed dimensions - edging sleeve fixed 60 mm - one movable disc - two rows of anti-ejection pawls - three bottom pulling shafts - two upper pulling shafts - two lasers - shaft support Kdsdper Ai Dmefx Aabsu Transport dimensions: 270x165x220 cm weight ~ 2000 kg

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. Kjdpfx Ajuzv Tzjabsdu SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Year of construction: 1995, condition: ready for operation (used), TK 90 manual edger consisting of: Ksdpfx Ajq U R Etjabodu Roof chain conveyor, ascending conveyor, 2 x under-table cross-cut saws, line laser, edger, roller table with splitting separator and tilting table. Naturally with all associated control cabinets and hydraulic unit. Furthermore, many templates and a fixed lath head are also included. A viewing is possible by prior and obligatory appointment. The price is exclusive of 20% VAT, ex works, exclusive of dismantling, loading, contract preparation and customs clearance costs.

Condition: new, Year of construction: 2024, The DESK-9 straight glass edger is an advanced machine designed for precise grinding and polishing of glass edges. With the ability to process glass with a thickness of 3 to 25 mm, the machine is extremely versatile and universal, suitable for various applications in the glass industry. Equipped with nine spindles, it ensures precise and even finishing of each edge, which translates into high quality of finished products. Thanks to its high power and wide range of processing speeds, the DESK-9 edger is able to cope with the most demanding tasks in a short time, which significantly increases work efficiency. The availability of various control options - manual with an LCD display, simple PLC control using a touch screen and PLC with pneumatic pressure on the polishing spindles - allows the machine to be adapted to the specific needs and preferences of the user, ensuring easy and intuitive operation. This machine is also characterized by high durability and solid construction, which guarantees long-term and reliable operation. The DESK-9 edger is the perfect solution for professionals in the glass industry who value precision, efficiency and the ability to adapt the device to individual needs. Available machine variants: 1. DESK-9_LCD: manual control with LCD display (non-touch) Kjdpfjpbbznex Aabjdu 2. DESK-9_PLC: simple control using PLC 3. DESK-9_PLC+PNEUM: simple control using PLC, pneumatic pressure on polishing spindles (on the last spindle and on bends) Advantages of the machine: • Versatility: Possibility to process a wide range of glass thicknesses (3-25mm), which makes the machine universal and adapted to various applications. • Precision: Nine spindles ensure accurate and even grinding and polishing of glass edges. • Efficiency: Thanks to its high power and wide range of processing speeds (0.5 ~ 6m/min), the machine is able to handle even the most demanding tasks in a short time. • Multi-variant: Availability of various control options (manual, PLC, PLC with PNEUMAT) allows the machine to be adapted to the specific needs and preferences of the user. This machine (DESK-9 with PLC control) is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine work "live"

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 32 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 8.2 kW (11.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 99 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 2,500 mm, Equipment: documentation/manual, 32x2mm Fully Automatic Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. Kjdjvwg Hmepfx Aabjdu NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 10-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 Kjdoia Nypepfx Aabjdu - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: Ksdpfxsn Hqmme Aabsdu - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 4 mm, working length: 3,000 mm, Equipment: documentation/manual, 76x4mm Semi Automatic NC Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Kodpovwg D Sjfx Aabjdu Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm Kdodpfx Aaoidmptobsu sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm – unit travel speed adjustment – linear laser Kedpfx Aajvntdmobedu – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm Kjdpfx Aema Dkfsabjdu chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg