Used Auto Hacksaw for sale (35,721)

Condition: used, Year of construction: 2015, cutting diameter 230 mm capacity 90 degrees: flat 320 x 130 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: flat 230 x 140 mm capacity 45 degrees: round 220 mm capacity 45 degrees: square 190 x 190 mm capacity 60 degrees: flat 120 x 105 mm capacity 60 degrees: square 105 x 105 mm capacity 60 degrees: round 120 mm turning speed range: 35 - 70 m/min dimensions of saw-band 2720 x 27 x 0.9 mm height of material-table 950 mm total power requirement 1.0 / 1.5 kW weight of the machine ca. 410 kg dimensions of the machine ca. 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle Cjdpfx Aexaa Rajddjrk - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User manual in German

Condition: new, functionality: fully functional, machine/vehicle number: 13261488, empty load weight: 645 kg, maximum load weight: 2,055 kg, overall weight: 2,700 kg, axle configuration: 3 axles, loading space length: 4,620 mm, loading space width: 1,940 mm, loading space height: 40 mm, Year of construction: 2025, Product Information: "Vezeko Car Trailer Race Master Alu 194x460 cm 2.7t" Loading dimensions approx. 1940 x 4620 mm Permissible total weight: 2700 kg Payload: approx. 2055 kg (payload may vary depending on additional equipment) Manufacturer: Vezeko Special Features - Loading platform easily tiltable via 2 hydraulic lift cylinders - 900 kg manual winch as accessory - Shock absorbers with Tempo 100 highway approval Additional Equipment Crjdpoq T R Smofx Addjk - Floor panel: aluminium floor - Multiple lashing points - 1 piece adjustable aluminium wheel chock - Fitted with 195/55R10C tires - Large safety lights Chassis - Rubber suspension axle | V-drawbar with ball coupling | automatic jockey wheel | reverse automatics Electronics - 12 Volt | 13-pin plug | side marker lights | clearance lights If you wish to purchase this trailer or have further questions regarding trailers, please use our internal tilt trailer reference number "No. 13261488".

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on Credpfxsu Ni Rps Addek 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: like new (used), functionality: fully functional, Complete industrial control station with double-sided automation cabinet row (approx. 8 cabinets), manufactured/assembled by Axis Industries (Lithuania) using Rittal TS8 enclosures and premium components (ABB, Eaton, Phoenix Contact, Weidmüller, Finder). This is a fully integrated automation node with central operator HMI panel. Suitable for reuse in power plants, industrial processes, HVAC control, pumping stations, data centers, filtration systems or any large-scale automation environment. The system includes: 1× Operator Control Cabinet with HMI panel 7× Automation / Protection / Relay Cabinets Complete wiring, terminal blocks, relays, contactors, PLC interfaces Ideal for reinstallation in a new industrial project. Crsdpfx Adoxxk U Hsdjk Technical Specifications Supply voltage: 400 V AC, 50 Hz, 3-phase Rated current: up to 630 A Control voltage: 24 V DC (HMI & low-voltage modules) Communication: Ethernet / Profibus Enclosures: Rittal TS8 industrial cabinets Ventilation: Electric cabinet fans Rittal SK3325107 Cabinet row length: ~6 m Height: ~2 m Total weight: ~1.2 t Condition Very good physical and electrical condition All modules and wiring are intact HMI operator panel, push buttons, selectors and indicators in place No burnt contacts or cable damage Applications Industrial automation systems Process control lines HVAC & air handling systems Pumping and filtration stations Power generation / FGD / boiler automation Manufacturing lines Energy management systems Rittal TS8, Axis Industries, control station, HMI panel, automation cabinet, power distribution, relay cabinets, industrial control system, 630A, ABB components, Eaton, Profibus, industrial electrical panel, used automation equipment.

Condition: excellent (used), Autotherm Here we offer you a 6-circuit temperature control device. Without active refrigerating machine! According to the enclosed technical brief description: Temperature range: -40°C ... +85°C (extended temperature range -40°C...+130°C) increased heating power 27 kW instead of 18 kW with 1x temperature control included in the main line with 6x temperature measurement in the respective flow included with 6x temperature measurement in the respective return included with 6x volume flow and pressure measurement in the respective flow included with 6x volume flow and pressure control included 1l/min ... 12 l/min and 0.1 bar ... 3 bar incl. release control incl. FU-controlled pump in the main line incl. 6x 3-way valve with 6x additional overflow valve 2 ... 12 bar adjustable included preset to 2,4 bar with filling and draining device included for all circuits together/simultaneously incl. 50l integrated tank incl. pneumatic emptying function with control S7 incl. included Energy saving and cooling capacity extension: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity at a flow temperature of +20°C: 50 kW. This increases the cooling rate in this temperature range and saves energy due to the lower running time of the refrigerant compressor. (Footprint of the basic unit according to data sheet increases by approx. 0.3 m²) Assembly in Rittal bayed control cabinet: 2x TS8 800x1000x2000 mm 1x additional, closed switch box min. 600x600x2000 mm (for control/electrics) Supplied via on-site or optional cooling medium supply Flow temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h continuously controlled Cedpskn Nilefx Addsrk For cooling capacity a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale ex location! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2630, tank capacity: 1,000 l, overall weight: 132 kg, wall material: stainless steel, wall structure: single-walled, operating temperature: 130 °C, overpressure (max.): 1 bar, Equipment: CE marking, Designed for storing food products Capacity 1000 liters Weight 132 kg Maximum pressure +1/-0.15 bar Maximum allowed temperature 130C +/-10C 20 pcs available Very good condition. Can be viewed on site. Csdpoxxra Rjfx Addork

Year of construction: 2010, condition: ready for operation (used), Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment. Codjxzt Dpjpfx Addork

Condition: excellent (used), Year of construction: 2019, Ref: 11037 . 2019 SCS Automaberg 2 HCR Semi-automatic 2 head cover corner rounding unit Features: Sturdily built, easy adjustable Perfect for small and medium production Quick and Easy Makeready Easily Moveable Reduced Floor Space Process: Covers are insert manually into the corner rounding station In two passes, the machine allows the perfect rounding of all 4 corners Equipped with heating system which softens the glue before rounding Corner pressure time can be adjusted easily on the display. Specification: Open Cover Size: Max 600 x 570 mm / Min: 143 x 92 mm Cover corner rounding radii: 4mm - 15mm Voltage: 230 V / 1 ph / 50 Hz Power: 0,5 kW Compressed Air: 0,5 ltr/cycle at 6 bar Weight: 200 kg Dimensions (L x W x H) 1.420 x 1.110 x 1.560 mm Crodpfsxx Uv Uex Addsk

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is straightforward and requires only two easy steps: filling the bag from above and sealing it. For sale: Autobag bags in the following sizes: 150x250 – 1.5 million bags 200x320 – 2.5 million bags Full Euro pallet pricing: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag Cjdpfx Aer E Dpzjddsrk 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 pallets or more: €0.01 per bag 1 million Autobag bags from €0.01 each.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 093705, Easifill standing screw filler including frame and screw conveyor. Crodpjxztt Refx Addek Machine in generally good condition. Operated with foot pedal and adjustable volume/number of rotations. Recipe control. Sensor and control system for the screw conveyor are integrated. Additional photos and video can be provided upon request.

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Crsdouv Eudopfx Addsk Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Auto pot filling and sealing machine direct from closed soup filling line. Can be supplied with Apple depositors (at extra cost) which were running with it. Crsdpfouzv Dtox Addjk

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm Cjdpfx Asiv Irleddjrk dead weight: 65 kg good condition

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 48 h, machine/vehicle number: BD38CNCOMPACT, Max. pipe OD 38mm CNC control Compact Model Crjdpovu R Amjfx Addek

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Csdpfxjxvxqde Addjrk Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Sell automation from Zeroclamp Zerobot 100P . Commissioning 2015 Cjdpfoti A Stox Addork (Fits perfectly for a Haas UMC 750, but also works with other machine types) With this automation, vice handling or blank handling can be implemented. Absolutely free design options. Large workpiece storage for many blanks (freely configurable) Small space requirement Equipment: * Various holding plates for blank handling * Blank gripper * Second rack for more component capacity * and much more. It is possible to operate blank handling or clamping device handling here. There are many possible applications, we will be happy to advise you.

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G Codpfxsht U Sns Addsrk -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, Crjdpfx Aovpt Eyjddsk clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Codpfxevi Eypo Addsrk Max. cut length 300 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, machine/vehicle number: HS-40A, controller model: auto or semi-auto, Technical Parameter Description of Steel Pipe Sealing Machine HS-40A Automatic Heating Sealing Machine. Its main features are as follows: This full - automatic heating sealing machine is equipped with a Kewei intelligent controller and a touch - screen for control, hydraulically driven, with high - frequency heating, and features man - machine interactive operation. The setting input is simple and convenient. It allows for arbitrary selection and automatic conversion between manual and automatic modes. The movable switch button has two functions: sealing and positioning. It has high safety and a counting function, enabling one - time forming of the seal. The overall machine has stable performance and high efficiency, making it an ideal equipment in the pipe - fitting sealing processing industry. A high - efficiency hydraulic cylinder drives the rack, and the gear rotates to achieve sealing. The specially designed fixture has strong and reliable clamping force, ensuring safety without damaging the surface of the workpiece. The coolant circulates automatically to ensure the long - term operation of the equipment. Sealing capacity (steel, stainless steel, alloy materials, etc.). Note: Tests are required for different pipe - fitting materials. HS-40A Automatic Heating Sealing Machine include: 1. Equipment Instruction Manual. 2. Equipment Operation and Debugging Instruction Manual. 3. Maintenance Record Sheet. It takes about 30 - 40 seconds for spinning both ends of one product. The wall thickness of the pipe is 1.0 - 2.5mm. Crodpovu Ryfsfx Addek The length of the pipe is 50 - 600mm.

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Cjdpouigrzsfx Addjrk Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Full Automatic or Semi-Automatic CNC bending and sawing machines Pipe size from dia. 6.0-150.0mm CNC bending, Shrinking, Sawing machinery, customerzied design available New machine stocks for sale listing price is for 2.5inch pipe type60nc bending Codpfovl S Dgjx Adderk

Condition: good (used), EA Electric Automatic Crsdpfx Ajuv Ewreddsk Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: like new (used), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters, vertical & horizontal Cedpfx Asvl Ewmsddjrk Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Ball, Valve, Flange face, RTJ groove, Bevel etc. One touch, More Welding Solutions, New stocks for sale!!

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): Csdpfxjw S T Rlo Adderk - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.