Used Auto Welding Helmet for sale (43,141)

Condition: new, Speedglas 9000XI Qn8Djfe still unused + spare lenses

Condition: good (used), Year of construction: 2004, In good technical condition and fully functional. Do3Xkp Linear welding guide 1000mm Year of manufacture 2004.

Condition: good (used), Load capacity: 150 kg, Automa welding turntable 150 kg load capacity disk diameter 500mm with chuck 250mm Speed infinitely variable from 0.01 to approx. 2.5 rpm Dplnlx Horizontal height 920mm Height tilted to center 725mm Swivel range 180° with foot remote control

Condition: good (used), Year of construction: 2002, Machine/vehicle number: 094-02, Offer 24377 Technical data: - max. load capacity 75 kg - Face plate diameter 500 mm - Spindle shaft passage 100 mm - Face plate swivels 0 - 90 ° - Rotation electr. infinitely variable 1 - 10 rpm - Right + left rotation - E. - Foot switch - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 870 mm - 3 jaw chucks 300 mm - Space requirement approx. W 750 x H 870 x D 500 mm - Weight approx. 150 kg Dpl2Dd

Year of construction: 2020, Condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 B79Ty23Bzl Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: as good as new (ex-display), Year of construction: 2024, SPS 150 welding turntable Maximum load capacity 150 kg. Manual tilting. Ugmcw Rotation with AC electric motor and inverter. Technical data see PDF

Condition: as good as new (ex-display), Year of construction: 2024, Rotary table positioning devices Burl8S22Y Load capacity 100 Kg. Rotation with DC motor. Manual swivel.

Condition: ready for operation (used), Overall weight: 218 kg, Orbital TIG welding machine for circumferential seam welding, with remote control Operating instructions are available Supply voltage: 380 V Primary current: 15 A Max. current: 19 A Power consumption 10 kVA Dimensions Bj0Zf7Uqm2X L: 1100 mm W: 650 mm H: 930 mm

Condition: ready for operation (used), Technical characteristics Welding machine: Welding of a frame (4 x 90° angles) in one automatic work cycle for the positioning of the profiles and digital positioning of the welding heads Fully automatic evacuation system of the welded frames The machine complies with CE safety standards and the four welding heads are equipped with a cover to ensure perfect protection of the operator All types of profiles (programmed KBE and PROFIALIS) Welding capacity: height 200 mm - width 140 mm Dimensions: inside 150 x 250 mm - outside 3150 x 3600 mm Welding parameters are individually adjustable on each welding head Electronic adjustment and control of the welding parameters on the screen Electronic temperature control of the welding plates and the limiting knives with digital display and alarm on the control panel Automatic adaptation of the welding time to the profile section Compensation system per profile piece to eliminate cutting tolerances (+5 / -2 mm) Perfect bead limitation for white, colored or structured profiles Ujoueyezlz Automation - error-free production File from your frame program, barcode reader "Desired size = welded size" allows for optimized cutting of the panels Possibility to generate a production report per period Machine control by PLC - PC of the latest generation Diagnostic system on screen (text and figures) Deburring machine : All types of profiles and combinations Speed and automation: high precision of the tool guides on 4 axes Automation of the control system Electronic recognition of the profile type Selection of the profile type by means of barcode label or online Automatic detection of crossbars High-frequency motors, adjustable speeds without interval All movements and speeds are adjustable from the control panel Selection of grooving or flat finishing as standard on the machine PLC control - PC of the last generation with INTEL processor Diagnostic system on screen Easy programming of new machining and profiles Power and Motors Overall dimensions

Condition: good (used), Year of construction: 2018, Functionality: fully functional, WAL MIG - MAG automatic welding machine Ug3Ad8Xuet with the following equipment Kemppi FastMig X 350 Kemppi WFX 300 Kemppi Remote X 37

Condition: used, Functionality: fully functional, Type of cooling: water, For Sale: Fronius FTV 50 + FRC 40 Specifications: Type: FTV 50 + FRC 40 Power: irrelevant Voltage: 1x 230 Volt Condition: Used Weldable Metals: Irrelevant Options: Horizontaly applicable Vertically applicable The FTV 50 carriage must only be used for creating mechanised butt and fillet welds in the: PA position PC position Dpjigt PG position PF position Including: FTV 50 FRC 40 4 Meter machine torch Rail Price: On Request All machines have been checked and are in 100% working condition The pictures above show the real machine. Also available with welding wire, pressure regulator, and other accessories. We are also the right address for the repair of your old welding machines. We can also offer you other types of machines, for example: New, Used, Mig/Mag, Co2, Tig, Pulse, Ac/Dc, Synergic, Watercooled, Electrode and Plasma. Brands that we can offer you: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. See also our other advertisements and our webshop. Due to the time we allow our customers, you can only visit us on appointment to view and order welding equipment. You negotiate at all times with Cjays Welding Equipment itself and never with third parties.

Year of construction: 2018, Condition: as good as new (ex-display), Fully automatic side welding machine Manufacturer: Diez Type: DCE 5015 Year of manufacture: 2018 Operating side: In running direction left Passage width: approx. 450 mm Diffuser height: approx. 150 mm Jad28U9Oy Passage length: Endless Working height / belt height infeed-outfeed: approx. 870mm +100 Capacity: Up to 30 cycles /min (depending on package size and feeding speed) Supply voltage: 400V AC, 50Hz, 3 Ph + N + PE Power consumption: 2 KW Rated current: 8 A With cable and 16A CEE plug Compressed air connection: 6 bar External dimensions: Length: 1750 mm Width: 1000 mm Height: 1520 mm Description: This packaging machine fully automatically wraps products of all kinds in film. Maximum flexibility thanks to the side sealing that can wrap the products endlessly. I.e. this allows the user to pack even overlong products. They are limited only in width and height. However, very small products can also be packed with it. The side sealing machine guarantees extremely stable side seams for all films. The film is processed by welding a half-tubular film (fine shrink film or PE shrink film) on three sides. The product length is detected fully automatically via sensors. Compact design High ease of operation and service Very robust and durable machine construction For polyolefin fine shrink films* and LDPE films Side sealing knife moves upwards when machine stops Permanently heated sealing system with low-maintenance Teflon coating Needle perforation can be switched on if required Easy and fast changeover between different products Photocell vertical and horizontal Motorized punch closing via servo motor All motors controlled by frequency inverter Very low noise operation Painting RAL 5012 .

Condition: excellent (used), Year of construction: 2019, Operating hours: 350 h, Functionality: fully functional, Two-pot welding portal, with integrated MULTIZAS 2x500A sources and 4MC wire feed units. The maximum section of welded I-beams is: height 1600mm, width 1000mm and length 12000mm. The machine is equipped with a 10" touch screen controller D2S3Ant0B

Condition: good (used), Year of construction: 2010, Technical data: Welding of longitudinal and circumferential seams 82Wzci7Hpi Horizontal working range: max. 4,000 mm Vertical working range: max. 4,100 mm PLC control: SIEMENS S7-300 with OP77 Single-wire and two-wire parallel wire welding: 2 x 2.5 mm Motorized rail trolley on rails Drive for lift and boom adjustment and ground travel gear via AC asynchronous gearbox Feed speed: 100 - 2000 mm/min. Power source: KJELBERG GTH 1002 UP powder preparation Welding process monitoring via CCD camera with color monitor Control panel for PLC incl. display CE mark in addition to the system: 2 pcs. Container turning device: 15000 kg The seller is not liable for typing or data transmission errors. The appearance, technology and wear of the machine are in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Czmzpbfwdt Pitch circle diameter 171,4 Chuck height including flange 135 mm Weight 53 kg

Condition: as good as new (ex-display), We offer welding machines in various configurations and always have several sets in stock. CMT / ROBOTER / CMT hosepacks UNIVERSAL or HIGH WAVE robots. Everything in stock and immediately available! Do not hesitate and ask for your individual configuration! We also have many different spare parts %%% -30% -50% -70% in stock - just send us a short mail / call / Whatsapp. CMT DEVICES at 1/3 new price! - 66% DISCOUNT ALL DEVICES CAN BE PURCHASED IN VIENNA WITHOUT WARRANTY! B9Rjxm0Uql BE PURCHASED! The indicated prices are all from ... Euro . The prices/offers are created individually according to device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example pictures of the article. please see the numerous Youtube videos about CMT! Also available via Whatsapp and Viber In stock in Vienna 1230 ( Vienna ) Shipping on pallet possible for an extra charge : Austria ca 180 Euro Germany ca 230 Euro Europe on request

Condition: refurbished (used), Type of input current: three-phase, Warranty duration: 6 months, Type of cooling: water, Hose package length: 4,000 mm, Electrical fuse: 32 A, DGUV certified until: 06/2025, Welding current at 60% duty cycle: 440 A, Input current: 32 A, Welding current (max.): 440 A, Equipment: Documentation/Manual, Type Plate Available, step-switched industrial high-performance welding machine, separate strong 4-wheel wire feed case, functions: 2-stroke/ 4-stroke, stepless wire feed, currentless wire threading + creep feed high melting performance, perfect ignition + welding properties, electronic box wear-free relays, integrated centrifugal pump cooling VA tank, Euro ZE connection for common liquid-cooled torch systems, processing of Masisv + cored wires, from low - high-alloy materials, aluminum wires from 0.8 - 2.0 mm Technical data: Mains voltage: 400 V Fuse protection: 32 A slow-blow max. current consumption: 36 Amp Max. power consumption: 19 kVA Open-circuit voltage: 20 - 57 V Working voltage: 16 - 36 V Protection class: IP 23 Cooling type: F Choke taps: 2 Setting range: 50 - 440 Amp Voltage levels: 36 = 3 x coarse / 12 x fine Wire feed capacity: 0.5 - 24 mtr / min Duty cycle: 440 Amp at 80 % duty cycle 360 Amp at 100 % duty cycle Weight: approx. 237 kg Scope of delivery: Between hose package 7mtr. Sfqk30Tnzr Workshop tested used machine Abicor Binzel burner 4mtr. Ground cable 70qmm² Pressure reducer Argon Co²

Condition: new, Year of construction: 2024, Laser welding machine with 3 Kw laser power, laser components from Siemens welding machine with real CE and therefore German manual, risk analysis and everything that belongs to be allowed to operate a laser welding system in Germany. Wire feed case, also with real CE, is also included. An instruction can take place here in the company. Bdqmbgk3Ix3

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, Automatic shaft straightening press Cxx7Us2Fb3 Disassembled from Hyundai line with professional team. Full set for sale including automatic loading.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Ocs8T Hydraulic

Color: other, Condition: used, New: No Empty weight: 1 kg Bbtwq2Lkwzc Not tested. No guarantee. More available. Please contact us if you can't find what you are looking for.

Year of construction: 2012, Condition: ready for operation (used), A CNC welding system Air Liquide Welding with CNC control is available. Welding material: stainless steel/aluminum, system dimensions X/Y/Z: approx. 12000mm/2500mm/2600mm, control: Nertamatic/Oscillarc 3. An on-site inspection is possible. Chdofljhqm

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, Machine/vehicle number: 52.693.00, Feed length X-axis: 1,525 mm, Feed length Y-axis: 1,525 mm, Feed rate Y-axis: 1,525 mm/min, Feed rate Z-axis: 1,525 mm/min, welding robot fully equip vertical bend arm robot - with 6 axes - reach: 1525 mm - with automat welding gun, type: DIX MALZ 520 - with wire feed device, manufacturer: FRONIUS, type:ROB.VR1500 DINSE-ZA - with 2 welding working tables (rotary table) - plate dimensions: each 1200 x 750 mm - with pneumatic driven cleaning device - with positioning straightening station for torch - with current source, manufacturer: FRONIUS, type: welding Bkuyhx9Qw9E device TPS 4000 - with technical documentation - attention: the machine can be transported on a standard truck Technical attributes dimensions (l x w x h) approx. 4700 x 3500 x 3800 mm weight approx. 5000 kg year of construction 2000

Year of construction: 2018, Condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x siegmund table 1200x800.(2019). 1 x HIGHYAG BIMO LASER WELDING HEAD. 1 x PC. Ccvmke9 Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Color: other, Condition: used, New: No Empty weight: 1 kg Dkuwqz Not tested. No guarantee. More available. Please contact us if you can't find what you are looking for.