Used Welding Smoke Extraction Systems for sale (43,730)

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Njdoy N Duqepfx Aphswk Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Nsdpsxf Up Iefx Aphewk

Year of construction: 2006, condition: good (used), RITTER brand welding fume extraction, dust extraction, and self-cleaning filter, pneumatic and vacuum-operated. Suitable for welding, grinding, sandblasting, and all types of dry dust. Filter cartridges in good condition. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Designed for continuous operation. Fan in a sound-absorbing enclosure, 2.2 kW. Nsdpfx Apehyg Ivjhjwk Capacity: 1200 m3/h. Filtration area: 10 m2. Additionally equipped with an automatic spark detection and extinguishing system. The spread of sparks is usually caused by the operation of production machinery or material contaminants. The result of such a situation is downtime in the production process and losses for the company, and in some cases, a serious threat to human life. Therefore, in order to eliminate similar hazards, pneumatic and mechanical conveying devices should be monitored for the presence of sparks and properly protected by using spark detection and extinguishing systems.

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz Nedpfx Apsicic Hshswk - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Nwjdpfeu S Tfgox Aphjk Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype Nedpfxjx Da Tij Aphowk For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Nwodpfx Apourlcrjhek Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: good (used), Year of construction: 2017, functionality: unexamined, We offer this well-maintained Förster Welding Systems 4225 railing welding fixture, year 2017. Manufacturer: Förster Welding Systems Model: 4225 Year of manufacture: 2017 Condition: good Category ID: 96 Nwjdey N A U Aspfx Aphek Type ID: 2257 Machine type: railing welding fixture If you have any questions or need more information, feel free to send us a message or call us.

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB Nwjdswypqlspfx Aphsk - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 1,400 m³/h, arm reach: 2,000 mm, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum filter by Plymovent Model: The Smart "ONE" Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter element in very good condition. Nwedpfx Apjy Shb Hshjk The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. 1.1 kW three-phase fan Capacity up to 1400 m3/h Filtration surface: 20 m2 Wall-mounted extraction arm, 2 m length Stock number: 1135

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 Nwodpfxezv Dclj Aphok TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m Njdpeyt I Axefx Aphewk protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: excellent (used), Catalog number: 8077 TECHNICAL DATA - Engine: 4kW - Voltage: 400V - Number of waste containers: one double container, 2x200l - Extraction capacity: approximately 4000 m3/h Nsdpszuk Tbofx Aphowk - Filter area: 20m2 - Negative pressure: 2350Pa - Extraction speed: 20m/s - Filter type: M - Extraction nozzle diameter: 195mm - Overall dimensions (L/W/H): 1700x900x2000mm - Weight: 300kg ADVANTAGES - Mobile sawdust container - Unpainted - Used extraction unit - DTR documentation - Very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1994, functionality: fully functional, For sale is a mobile dust extraction unit from AL-KO, suitable for extracting wood chips and dust from woodworking machines. Technical data / Features: Manufacturer: AL-KO Model: AL-KO 100 Filter module 1 Year of manufacture: 1990 Airflow rate: approx. 2,200 m³/h Motor power: 1.5 kW Connection: 380 volts Mobile dust extraction unit Filter bag Nodpszv Thqofx Aphewk Chip collection bag Chassis with wheels Motor protection switch with on/off button Extraction nozzle Compact and robust design Condition and scope of delivery as shown in the photos The unit is suitable as a compact, individual dust extraction system for various woodworking machines. Inspection and demonstration are possible by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2006, Nominal volume flow: 4400 m³/h. Suction nozzle: 250 mm. Motor power: 5.5 kW. Nominal speed: 2880 rpm. Equipped with a fire extinguishing system. Weight: 730 kg. Nodpjzvn Nvofx Aphswk Location: Nattheim.

Condition: used, Extraction unit Holzprofi G4000, year 2015, in less good condition, 3 kW, 45 kg Njdpfx Aowzzdgjphewk Price changes reserved, subject to errors, misprints, and typographical mistakes.

Condition: used, Dust extraction system Manufacturer: Spänex Type: Year of manufacture: Technical data Note: Nwjdpszu Alpefx Aphok The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Extraction system Manufacturer: Schuko Type: Solo-160-2323/30/182/BD Year of manufacture: 2022 Technical data - Length x Width x Height: 2400x2400x10000 mm - Airflow: approx. 15,500 m³/h - Type of dust: Plastic, chips (dry) - Filter hose diameter: 160 mm - Filter hose length: 3000 mm - Total filter area: 182 m² Nedpfx Aezu Ah Rephjwk - Rotary valve: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Dust extraction system Manufacturer: Nawara Type: RUBIN 2030 Year of manufacture: 2018 Technical data Application: - Designed for the extraction of dry dust and wood shavings - Suitable for woodworking and industrial dust extraction Performance: - Airflow rate: approx. 30,000 m³/h System features: - Stationary modular filter system - Warm air recovery system (summer/winter operation with adjustable damper) - Designed for continuous operation Compliance: - Complies with EU Machinery Directive 2006/42/EC - Complies with ATEX Directive 2014/34/EU (for potentially explosive atmospheres) - Meets the relevant Polish regulations on machine safety Air lock / discharge system: - Type: SL 1400 EX - Length: 1400 mm - Height: 360 mm - Connecting frame (top/bottom): 1490 x 420 mm - Drive type: Direct drive with elastic coupling (Rotex 38) - Gear motor: SEW R47 DRN80MK4 (Option: DRN90S4) - Speed: 15 rpm (Option: 29 rpm) Electrical data: - Power supply: 380 V / 50 Hz Dimensions (air lock unit): - L W H: 2000 x 420 x 360 mm Installation: - Complete external filter system included in the scope of supply - Internal piping within the factory included in the scope of supply, but subject to separate negotiations Note: Nwodpfx Ajzuz S Usphek The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. Nwedpfx Apjxrgl Iehjk - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Nsdpext Dq Rjfx Aphjwk Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm Nwjdpszuwqtjfx Aphjk - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), disassembly included in the price air return duct fan motor power: 15 kW screw conveyor total lock 72 filter bags mechanical filter cleaning Nodpfxezvpxlj Aphowk transfer fan for sawdust

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, power: 0.35 kW (0.48 HP), suction capacity: 400 m³/h, Capacity: 400 m³/h Negative pressure: 1250 Pa Motor: Type B5-71 with 2850 rpm Connection: 380 V Total power consumption: 0.37 kW Machine weight approx.: 35 / 28 kg Machine dimensions approx. L x W x H: Ø 0.5 x 1.3 m Nodpfxozu Th Io Aphowk

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan -Quantity: 1 piece available Nsdpsy R S E Hofx Aphjwk -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg