Used Welding Smoke Filter for sale (13,311)

Condition: ready for operation (used), Year of construction: 1991, Flow rate: 1500 m³/h Knjdowx H Dyepfx Adbsd Drive motor: 380 V, 2850 rpm, 1.5 kW Extraction pipe diameter: 140 mm 3-meter sections with 3 joints, height-adjustable Intake funnel with throttle valve Space required: 1150 x 600 x approx. 2300 mm

Condition: used, Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block Ksdopm Th Eopfx Adbjnd -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

Condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm -Weight: 76 kg Knsdofkzbdepfx Adbed

Condition: used, Welding smoke filter, welding smoke extraction Ksdpfx Aeb A Hwmsdbjnd -electrostatic filter -Extraction arm: 4000 mm -mobile

Year of construction: 1990, condition: used, mobile welding smoke filter, welding smoke extraction, soldering smoke extraction Knjdpfx Adjb A Nucobed -Drive: 2.2 KW -Extraction arm: 3000 mm -Connection: 380 V 50 Hz -Dimensions: 860/1250/H1950 mm -Weight: 120 kg

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor Ksdpfxjrzvw To Adbond -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Condition: used, Year of construction: 1992, mobile welding smoke filter, welding smoke extraction, soldering smoke extraction -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg Kodpfxeb A Sbmo Adbend

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: "Fumatech" MF 1100 -Drive: 1.1 kW Ksdpfx Aoqwprgedbjnd -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW -Volume flow: 1000 m3 / h -Extraction arm: O 160 mm x 4200 mm -Transport dimensions: 655/910/H1470 mm Kjdpfshmqm Ijx Adbjnd -Weight: 194 kg

Condition: used, mobile welding smoke filter, welding smoke extraction Kedpfeb A Ng Iex Adbsnd -portable -Extraction connection: 1 -Drive: 1 kW -Volume flow: max. 170 m³/h -Number: 1x available -Weight: 20 kg

Condition: used, Year of construction: 2017, operating hours: 22,300 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, filter area: 222 m², suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Industrial Hall Filter Ventilation for Welding Shops — suited for various technological processes in production plants, predominantly during metalworking operations. Ultra-low energy consumption thanks to the implementation of innovative fan technology. Utilizes an EC (Electronically Commutated) fan instead of a standard unit, delivering SIGNIFICANT savings by minimizing power usage. The EC fan, equipped with an integrated inverter, allows variable speed control and enables adjustment of energy consumption/performance within the 60%, 80%, and 100% operating ranges. Air is drawn in from above and gently discharged near floor level directly at workstations, avoiding unpleasant drafts. Based on the principle of stratified filter ventilation, the unit does not require ductwork installation. Equipped with self-cleaning cartridge filter elements, using compressed air pulses during operation. Filter cleaning is managed by differential pressure control, preventing compressed air wastage. Stratified ventilation principle: contaminated air is drawn from above, filtered, and then released at floor level as clean, respirable air without creating drafts, at speeds below 1.2 m/s—precisely where operators work. Covers a wide 270-degree area. The AirTower operates according to the stratified ventilation guidelines recommended by trade associations, considered the most effective method of air recirculation. Year of manufacture: 2017 Operating hours: 22,300 Specifications: Knodpfxoxxhwro Adbjd - 4 EC fans, each 3.9 kW - Airflow: 20,000 m³/h - Filter area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire safety package - EC Blue energy package - Hall dust sensor: dust level sensor with LED indicators, transmitting air quality data to the AirTower for automatic power adjustment Energy savings depending on the current dust concentration in the hall. Exceptionally quiet operation Stock no.: 1067

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Ksdpen Armaefx Adbsnd Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Kjdpfx Adjxvpumjbend Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW Kjdpfx Aofrzt Usdbend weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Knodpfxexf Up Is Adbod

Condition: good (used), type of input current: AC, overall weight: 85 kg, input voltage: 220 V, suction capacity: 1,050 m³/h, input frequency: 50 Hz, Nedermann 641 Mobile welding fume extractor filtration capacity: 1050m3/h articulated extraction arm arm length 220cm voltage. 220v 50hz 900watt Airflow in the arm: 750 - 1050 m3 Knedpfx Adevmr D Aobod Weight: 73 kg Arm diameter: 160 mm Noise level: 73 dB(A) Filtration efficiency: Main filter>99 % -HEPA filter >99.97 % DOP 0.3 mm Filter area: main filter 35 m2 - HEPA filter 7.5 m2

Condition: used, Year of construction: 2017, operating hours: 20,700 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC filter ventilation tower - 20,000 m³/h Industrial hall filter ventilation for welding halls — suitable for numerous technological processes in manufacturing facilities, mainly those involving metalworking. Extremely low energy consumption thanks to innovative fans. Features energy-saving EC fans instead of standard fans, providing SIGNIFICANT savings by minimizing electricity usage. The EC fan with integrated inverter enables precise control of fan speed, energy consumption, and device efficiency. Adjustable operating range: 60%, 80%, or 100%. Air intake from the top with draft-free air discharge at floor level — precisely at workstations. Layered filter ventilation system; no need for pipeline installation. Self-cleaning cartridge filter elements — cleaned automatically by compressed air pulses during operation. Filter cleaning is based on differential pressure, ensuring no compressed air losses. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air with no drafts, at a velocity below 1.2 m/s — directly where employees breathe, covering a broad 270-degree area. The AirTower operates in accordance with the layered ventilation method recommended by professional associations, considered the optimal form of air circulation. Year of manufacture: 2017 Operating hours: 20,700 Specifications: - 4 EC fans, each with 3.9 kW power - Airflow rate: 20,000 m³/h - Filter surface area: 222 m² - 6 cartridge filter elements Kedpfx Adoxxalnjbsnd - High-efficiency final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor — LED-indicated, transmits dust concentration data to the AirTower to adjust device output automatically. Enables energy savings based on current dust levels in the hall. Very quiet operation Stock no.: 1066

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg Kjdpfx Adju Nv Afjbsnd electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked *

Condition: new, volume capacity 1600 m3/h Ksdpjxaal Refx Adbond feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: used, Extraction capacity of the unit: 182 m³/h Knodpfx Adeb Nv S Eebsd with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² electr. connection: alternating current 220 V weight: 20 kg Space requirement: 850 x 330 x 450 mm

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h Knodpovdczajfx Adbsd rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Year of construction: 1991, condition: ready for operation (used), machine/vehicle number: 004744, extraction capacity: 1200 m³ / h Ksdofm Ekxjpfx Adbjnd drive: 0.75 kW space requirement: 700 x 660 x 1030 mm

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw Ksdpju Nv Dpofx Adbend weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Pressure max. 22000 Pa electr. connection: 230 V Knjdpsb Nv S Sjfx Adbjd weight: 16,5 kg Space requirement: 720 x 320 x 410 mm

Condition: used, Year of construction: 1988, Technical details: intake capacity: 1200 m³/h aspiration hole diameter: 230 mm Kjdpfx Asu Nwitjdbond total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *