Maximum tool width: 330 mm
Tool diameter (min-max knife heads): 80 - 300 mm
Grinding wheel diameter (min-max): 125 mm
Grinding wheel bore size: 60 mm
Grinding wheel speed: 4000 rpm
Maximum grinding speed: 530 mm/min
Grinding wheel drive: 1,1 kW
Em7k0yf30
Clearance angle: 15 - 35°
Coolant tank: 125 L
Motor coolant pump: 0,28 kW
Connection values, total: 2 kW
• Maximum tool width: 330 mm
• Tool diameter (min-max knife heads): 80 - 300 mm
• Grinding wheel diameter (min-max): 125 mm
• Grinding wheel bore size: 60 mm
• Grinding wheel speed: 4000 rpm
• Maximum grinding speed: 530 mm/min
• Grinding wheel drive: 1,1 kW
Bi7dktis99
• Clearance angle: 15 - 35°
• Coolant tank: 125 L
• Motor coolant pump: 0,28 kW
• Connection values, total: 2 kW
50MM GRINDING ARBOR
330 MM MAX. GRINDING LENGTH
300 MM MAX. TOOL DIAMETER
GRINDING MOTOR 1,1 KW
FEED MOTOR 0,045 KW
Bhriudwv
COOLING PUMP 0,08 KW
DIVIDING HEAD FOR AUTOMATIC SHARPENING SEQUENCE.
DIMENSIONS APPROXIMATELY. 1,40 X 0.9 X 1,40 M
WEIGHT APPR. 375 KG
50MM GRINDING ARBOR (NEW)
430 MM MAX. GRINDING LENGTH
300 MM MAX. TOOL DIAMETER
GRINDING MOTOR 1,1 KW
FEED MOTOR 0,045 KW
COOLING PUMP 0,08 KW
DIVIDING HEAD FOR AUTOMATIC SHARPENING SEQUENCE.
DIMENSIONS APPROXIMATELY. 1,40 X 0.9 X 1,40 M
Bpey3j7jty
WEIGHT APPR. 375 KG
50MM GRINDING ARBOR
330 MM MAX. GRINDING LENGTH
300 MM MAX. TOOL DIAMETER
GRINDING MOTOR 1,1 KW
Bjn8po7qnc
FEED MOTOR 0,045 KW
COOLING PUMP 0,08 KW
DIVIDING HEAD FOR AUTOMATIC SHARPENING SEQUENCE.
DIMENSIONS APPROXIMATELY. 1,40 X 0.9 X 1,40 M
WEIGHT APPR. 375 KG
Knife Grinder
S27prftvs
Grinder for sharpening planer thin ASN-810
Grinder is designed for automatic sharpening planer blades mounted in the package to 4 pieces. Sharpening is done face polishing pots. Assuming the chip occurs outside the cut. The size, number of passes working wyiskrzających, speed and the grinding head of recurrence points - are programmed in a microprocessor controller. The grinding head is moved along the bed by means of a motor-driven helical gear running on guides with...
Three-knife automat: - right-hand infeed - silicone spraying device similar products
Cjnylks3
Three-Knife-Trimmer Wohlenberg A43/30W
Serial-No. 4651
Semi-Automatic
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
Jvotbi
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Straight knife grinder REFORM with magnet mm 2500x150, 6 kw motor, varibale speed of the carriage 1-25 m/min
Bambrgeu
CATALOG NUMBER 6033
TECHNICAL DATA
- system: shredding 2 knives sharpened on both sides and beaters with counter blades - cutting knives
- 745x600mm loading hopper inlet
- additional loading hopper
- outlet for chopped wood fi 200mm
- 22kW engine
Vtzz73
- screen diameter 6mm
- capacity up to 2500 kg / h and depends on the shredded material
- dimensions length / width / height 1400x1700x1700mm
- weight 612 kg
Net price: PLN 17900
Net price: EUR 4115
Net price, calculated at the rate of 4.35 PLN...
Butcher Boy Automatic feed meat grinder
Bqn0y0wpeo
Model: AU56
80kg stainless hopper, 5500Kgs per hour, 140mm diameter discharge chute, 25HP, 3Ph
MODEL G320A
Maximum length of cutterhead
Conventional cutterhead (by nut locking) 320 mm (12.6")
Hydraulic cutterhead (by hydraulic bushing locking) 320 mm (12.6")
Brnt3rthjk
Max. diameter of cutter 320 mm (12.6")
Min. diameter of cutter 125 mm (5")
Max. knife numbers 32
Grinding wheel
Diameter 175 mm (6.9")
Bore 25 mm (1")
Spindle speed 3000 rpm Max
Motors
Grinding wheel arbor 1.5 Kw (2 HP)
Coolant pump 0.188 Kw (0.25 HP)
Hydraulic motor 0.75 Kw (1 HP)
Cooling system
Coolant tank capacity -...
Book and booklet stacker: - with pre-stacker "Doppler" - roller delivery with integrated work table and delivery plate
Fbp3a9keq
Built in: 1998
Size:
max 310 x 400 x 80 mm
Size trimmed:
Or32p
max 300 x 388 x 80 mm
min 100 x 120 x 2 mm
Speed:
max 6.000 c/h
Feeding height:
max 80 mm
Air requirement (6 bar) 30 m³/h
Length: 2.300 mm
Width: 2.200 mm
Height: 2.500 mm
Weight: 5.700 kg (approx.)
Knife grinder GÖCKEL model GB1 grinding length mm 1200
0livosfr
Automatic Planing Knife Grinding Machine 85cm
Vtysc3
Catalog number H0291
- new machine, with a guarantee, CE certificate,
- DTR documentation in Polish
- in stock
TECHNICAL DATA
- voltage 400V / 3 / 50Hz
- 1.5 kW engine power
- 60W feed motor power
- cooling pump motor power 40W
- rotational speed 2800 rpm
- max. length of the sharpened knife 700mm
- sharpening angle 0-90 °
- dimensions of the grinding wheel fi120x50xfi32
- dimensions length / width / height 1130/600 / 1320mm
C2m8b73g
- weight 300 kg
Net price: PLN 5,680
Net price: EUR 1,352 d...
Semi-automatic grinding machine for profile grinding.
Automatic straight knife grinder.
Automatic dividing according to number of knives
Automatic linear movement for straight knife grinding
Grinding wheel diameter min./max.: 150 mm / 225 mm
Grinding wheel width: Ceramic 5 mm, Borazone 10 mm
Bq0fvtxhzq
Grinding wheel bore: 60 mm
Tooling circle min./max.: 100 mm / 300 mm
Nfjnl
Tool width max.: 240 mm
Grinding wheel drive: 1,1 kW
Grinding spindle speed infinitely variable n = 1500 - 3000
Free a...
Three-knife automatic machine: - Right-handed infeed - Standard cutting tables - Silicone spray device
Boer8emk
Built in 2003
Mechanical speed 900 - 2700 t/h
Product height trimmed 145 - 380 mm
Product widthtrimmed 100 - 300 mm
Product thickness min 2 mm
Feeding height 10 - 100 mm
Equipment
• infeed belt from the right side
• automatic infeed with integrated counter stacker
• silicone spraying device
• central lubrication
• belt delivery
• equipment for changing the format:
• 1 set of clamp plates & plate holders
• cutting plates 2-7
• 1 set cutting table plates
Qi2dl82v
• 3 sets of cutting sticks
• 2 se...
Automatic carbide saw grinder UTMA model AL805 for top & face (equipped with 2 grinding wheels). Diameter from 80 to 810 mm. The machine has always worked full oil.
Cnk7niuq
Grinding length 6.000mm
Main spindle 11 Kw: grinding wheel 255 x 205 x 100mm
Vertical travel 150mm
Bfykniig
Horizontal travel 90mm
Tilting angle 0-5dg
Cooling through motor shaft.
Super Finish spindles: grinding wheel face side 100 x 75 x 30mm inclination +/-5dg. Back face side 125 x 97 x 30mm inclinaiton 0-25dg.
Magnet chuck 1.500 x 200 x 4pcs, inclination angle -90/+90
Table speed 5-15 m/min
REFORM, VKM 55
REFORM AFFILATRICE PER COLTELLI.
REFORM KNIFE GRINDING MACHINERY, SHARPENING MACHINERY;
REFORM AFFUTEUSE pour lames;
REFORM AFILADORA de CUCHILLAS.
Praticamente NUOVA, Practically NEW, Pratiquement NOUVELLE, Prácticamente NUEVA.
The REFORM grinding machine Type VKM is a high precision grinding machine incl. lower front rail (easy access) and incl. accordion way covers (protection of the rails). Furthermore this machine includes a high precision ZS micro angle head and honi...
Technical parameters:
Min. Trimmed Book Size (spine length x book width) 148 x 102 mm
Max. Starting Book Size (spine length x book width) 330 x 241 mm
Maximum Book Thickness 51 mm
Maximum Trim - Top 152 mm
Fq2gyzz
Maximum Trim - Bottom 89 mm
Maximum Trim - Face 140 mm
Minimum Trim - All Sides 2.5 mm
Throughput Up to 200 books per hour (single book)
Up to 500 books per hour (multi-book)
Memory 99 Book Jobs
Set-up Time for Book Size Change Approximately 10 Seconds
DIMENSIONS
Overall H...
Cut-off saw: - Magazine feeder - Turning belt 3605
Bmbrwuvofu
Built in 1993
Size max 315 x 410 x 100 mm
gross weight 11.000 kg
Weight 11.000 kg (approx.)
Speed max 1.800 c/h
Equipment
infeed belt from the right side
central lubrication
belt delivery
1 set of clamp plates & plate holders
1 set cutting table plates
3 sets of cutting sticks
Ckcufskc
2 sets of knives
external knife changing device
1 set of standard tools
Condition: good working condition
three knife trimmer automatic with integrated pre stacker
Planer knife grinder WISMAR, grinding length 820 mm
Coowsfpi
Automatic grinder for solid profile and straight knife tooling.
Specifications:
• Max. working width: 260 mm
• Min. tool diameter: 80 mm
• Max. tool diameter: 280 mm
• Automatic indexing: Z1 to Z36
• Adjustable clearance angle, radial: 15 – 35 degrees
• Adjustable clearance angle, axial: 0 - 15 degrees
• Grinding wheel bore: 20 mm
• Grinding wheel diameter: 125 mm/150 mm
• Grinding wheel speed: 4600 rpm
• Automatic grinding wheel adjustment
Bwvqoeh
• No. of grinding cycles: 01-09
• Max. grinding...
2.2 kW motor, 2 stationary blades, 7 rotating blades
Ei7abo9mg
• overall dimensions 1600x1220x1800 mm;
• power 32.4 kW;
P3aan7
• power supply 400 V, 50 Hz;
• suitable for frozen meat -4*C;
• 2 feeding speeds;
• 1 grinding speed.
cut-off saw: - infeed from the right - with turning belt - with suction (older year of construction) - with bypass
Msgi27jr
Built in 2000
Size:
max 384 x 320 mm
min 140 x 103 mm
Size trimmed:
max 304 x 310 mm
Size trimmed: 136 x 100 mm
Bll7ltdtc
Book thickness:
max 80 mm
min 2 mm
Speed:
max 4.000 c/h
min 1.000 mm
Weight: 3.500 kg (approx.)
Power requirements: 7 kW (220/380V, 50Hz)
Air requirement: (6 bar) 40 m³/h
Width: 3.612 mm
Depth: 1.970 mm
Height: 2.020 mm
Equipment
right hand infeed
make-ready system
external knife changing device
2 sets of knife holders
2 set of knives
equipment for changing the format:
1 set...
Planer knife grinder Vollmer 850 mm grinding length
Cip8yzuy
Three knife trimmer automatic with integrated pre stacker
Built in: 1992
Size:
max 350 x 440 mm
min 146 x 103 mm
Size trimmed:
max 310 x 420 mm
min 140 x 100 mm
Product thickness:
max 70 mm
min 3 mm
Speed max: 6.600 c/h
Power requirements: 12 kW (220/380V, 50Hz)
Equipment:
infeed belt
right hand infeed
thin product device
external knife changing device
Czcoigam
2 sets of knife holders
2 set of knives
equipment for changing the format:
1 set of pressing plates & holders
1 set of quick change ca...
Carbide saw grinder VOLLMER model CX100 year 1998
We can supply the machine:
a) as it is
b) cleaned, repaired, tested, in very good condition
c) fully reconditioned and repainted
N7adp
Three knife trimmer automatic with integrated pre stacker
Built in 2004
Size:
max 384 x 340 mm
min 140 x 103 mm
Size trimmed:
max 304 x 310 mm
min 136 x 100 mm
Book thickness:
max 70 mm
min 2 mm
Speed: max 1.000-7.000 c/h
Power requirement: kW 14 kW
Compressed air: 40 Nm³/h bei 6 bar
Width: 3.612 mm
Depth: 2.950 mm
Olzv2
Height: 2.030 mm
Weight: 4.000 kg (approx.)
Equipment
equipment for changing the format:
- 1 set of pressing plates & holders
- 1 set of size extensions
- 1 set of table quick...
Built in 1995
Size max 304 x 340 mm
Xu8ck
Size min 146 x 103 mm
Speed max 7.000 c/h
Equipment
• right hand infeed
• prestacker
• thin product device
• electronic counter
• 2 sets of knife holders
• 2 set of knives
• equipment for changing the format:
• 1 set of pressing plates & holders
• 1 set of quick change cassettes standard size
• central lubrication
Outdated on 2014
Format
max 315 x 410 mm
Format cropped
max 300 x 380 mm
Format cropped 60 x 80 mm
Einsatzhöhe
Bezxh7tm7n
max 80 mm
min 4 mm
Performance
max 1,500 c/h
Force demand 4.5 kW (220/380V, 50Hz)
Air demand (at 6 bar) 0.2 m ³/h
Outdated on 1992
Format
max 460 x 350 mm
min 70 x 50 mm
Performance
max 25 c/min
Inlet height 120 mm
Pressal beam opening
Nseperex
max 160 mm
Power consumption
kW 7.5 kW
Length of the cut - 3000 mm
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
Zthyl0f7
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
grinding range max. 30 mm
angle adjustable from - to horizontal 0-180 Grad
Bh73wfiuzd
angle adjustable from - to vertikal 0-45 Grad
angle adjustable from - to negativ 0-52 Grad
connected load 230 V
wheel diameter 100 mm
weight of the machine ca. 55 Kg
dimensions 0,5 x 0,4 x 0,4 m
This grinding machine is suitable for:
Twist drill (max.13mm), milling cutter and turning tool (max. 30mm)
comes with:
- chisel grinding tool
- Diamond grinding stone for HM.
- White whetstone for HSS.
- LED lighting...
Cevapcici automatic machine
Capacity: 10.000 pc/h
Ewoxibc2
Age: ca. 1960 // Power: 4‘500 sheets / h
Format: 32 x 44 cm
Videolink is from an identical machine.
Xb8aj0od
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
straightening unit
Q9shwhb7
sheet width (max) 350 mm
sheet thickness (max) 10 mm
number of levelling rolls 5
diameter of levelling rolls 100 mm
distance of levelling rolls 77.5 mm
feeding rolls 2 x 2 pc.
with loop control
coil cradle
sheet width (max) 330 mm
max. outer diameter of coil 1300 mm
length appr.: 4900 mm
width appr.: 1820 mm
height appr.: 2030 mm
weight appr.: 2500 kg
flader 8 agregats
Rtwhlpioi
with invertor x 8
modell ls 4
new rolle
Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS
Dunn9i
Kap Saw Reinchardt NC 700 automatic
Manufacturer Reinchardt
Model / machine type NC 700
Year of production 1998
Machine category Kapła Kapowa
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
Cost of delivery
Customer cover
Start type
H8uf7cg
to be agreed
Description
Comments
CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT
Serial No. 990113460
Control Fanuc
Table size 2150mm x 1100mm
Table load 1000 kgs
X Axis Traverse 2040mm
Y Axis Traverse 1020mm
Bokoj2en3r
Z Axis Traverse 400mm
Distance between columns 1400mm
Speeds 27000 rpm
Cutting feed rate 1 - 10000 mm/min
Feed rate rapid travesre X = 25000 Y= 25000 Z= 18000
Spindle nose to table 150mm - 1100mm
Spindle taper 40 BT
Automatic tool changer Yes
Number of tools 40
Tool length 300mm
Tool diameter 80mm or 130mm with adjoining pockets empty
Tool weight 8kg
ATC tim...
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
