Used Automatic Cnc Lathe for sale (28,812)

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Bwjdpfsyk Hrgox Ad Dsl Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Year of construction: 2000, condition: excellent (used), TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Bwodpfx Aemdn Imed Djl Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2006, condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Bsdpol R Ix Sofx Ad Dswl Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW main spindle bore: 26 mm PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Bwedpfxsiq Dp No Ad Dsl Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 9589 (232-0001), Manufacturing origin CH Netweight 1600 kg Custom position 8458.9120 Dimensions 167x87x165 cm With bar-feeder LNS Tryton 112 TECHNICAL DATA Control Fanuc série 32i-B 5 linear axes : Longitudinal travel of main spindle Z1 Longitudinal travel of backwork counter spindel Z4 Cross travel of tools X1 (turning operations and cross milling) Cross travel of tools Y1 (tools selection and milling operations) Radial plunge of 2 tools (T21 et T22) X2 Spindel (mounted on Z1-axis) : Max bar capacity 10 mm Bodpfx Adof Nqzqo Djwl Work travel 20 mm Type of drawed collet W15 Max speed 15'000 min-1 Linear tools system mounted on 2 axes X1 and Y1 Tools system for turning comprising 2 slides controlled by X2-axis Backwork counter-spindle with motor (on axis Z4) : Max clamping 10 mm Work travel 120 mm Type of pushed collet F13 (76-00357) Max speed 15'000 min-1 Spindles denomination S1 et S4 Least increment for axes programming 0.1 µ Coolant pump max flow 50 L/min Pump motor 1,1 kW Oil tank 130 L errors and omissions excepted-data given without obligation

Condition: used, CITIZEN CINCOM K 16 E V II P is a CNC automatic lathe designed for precision, high accuracy and reliability. Capacities: max turning Ø 16 mm, turning length 200 mm, spindle bore 20 mm, max threading 8 M, back‑machining 80 mm. Specs: 7 axes, spindle 200–10000 rpm, 2× HF 60000 rpm, spindle motor 3.7 kW, 4 driven tools 6000 rpm, 3×400 V 50 Hz, weight ≈2250 kg, L2020×W1070×H1680 mm. Accessories: LNS bar feeder, Donaldson oil‑mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Bwodpfeyxn D Usx Ad Del

Condition: used, STAR SB-20R type N is a CNC automatic lathe (CNC Swiss type) engineered for high-precision work with superior accuracy and reliability. Capacities: max turning Ø 20 mm, max drilling Ø 10 mm, max threading Ø 8 M; total 5 axes, C-axis resolution 0.001°. Specs: spindle stepless 500–10000 t/min, rapid traverse 35 m/min, spindle motor 2.2/3.7 kW, total power 3.7 kVA, 50 Hz 3x 400 V, weight ≈1800 kg, dimensions L2070 × W1770 × H1760 mm. Accessories: C axis, workpiece conveyor, chip conveyor, coolant system, RS232 and USB interfaces. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Bjdeyxnztspfx Ad Dswl

Condition: used, STAR SW 20 is a CNC automatic (Swiss-type) lathe offering high precision, strong accuracy and reliable performance. Capacities: 11 axes, 2 spindles, max machining Ø 20 mm, back spindle up to 10,000 t/min. Specs: spindle 3.7 kW, driven tools 1.2 kW (8,000 t/min), carriages with 7 and 5 positions, counter-operation 8 tools (6 driven), rapid traverse 35 m/min, 50 Hz 3x380 V, ~3400 kg, L2600×W1150×H1765 mm. Accessories: bar loader, lamp, 150 l coolant system, ELBARON oil-mist extractor, interface for bar loader. Achieves tight tolerances; typical uses: automotive, watchmaking, tooling, aerospace, medical. Bwedpfxjyxnwno Ad Dol

Condition: used, CITIZEN CINCOM R 07 VI is a high-precision CNC automatic lathe (Swiss-type) delivering strong accuracy and reliability. Capacities: 6 axes, 2 spindles; max turning Ø 7 mm, max length 40 mm, spindle bore 12 mm; threading up to Ø4 M, max tapping length 40 mm. Specs: spindle 0–16,000 rpm, 1.1 kW; back spindle up to 10,000 rpm, 0.5 kW; C-axis resolution 1°; supply 3x400 V 50 Hz, total power 4 kVA; weight ~950 kg; footprint 1465×560×1410 mm. Accessories: parts catcher, lamp, bar feeder LNS TRYTON 107, central lubrication, status light. Built to achieve tight tolerances; typical applications include automotive, watchmaking, medical, aerospace, and machine-tool components Bedpfx Ajyxnutod Dewl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 380 mm, turning diameter: 165 mm, spindle speed (max.): 5,000 rpm, bar passage: 51 mm, controller model: Mitsubishi MELDAS, Machine in very good condition, fully functional both electrically and mechanically! TECHNICAL DETAILS Maximum bar capacity: 51 mm Maximum turning diameter: 165 mm Maximum turning length: 380 mm Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 5,000 rpm Tool turret Number of tool turrets: 2 Bwedpoyvfvbefx Ad Dol Positions per turret: 12 Driven tools possible MACHINE DETAILS Control: Mitsubishi MELDAS Machine weight: 8,000 kg EQUIPMENT Y-axis Simultaneous machining possible High rigidity and process reliability Complete technical documentation available

Condition: used, Year of construction: 2006, turning length: 205 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 500 rpm, turning diameter: 20 mm, overall weight: 3,500 kg, total width: 1,150 mm, total length: 6,850 mm, total height: 1,765 mm, Equipment: documentation/manual, CNC Swiss Type Automatic Lathe CNC Control Star NICS (Yaskawa-Siemens 840DI) Turning diameter 20 mm Turning length 205 mm Spindle bore diameter 20 mm Spindle speed 500-10.000 R/min Spindle motor 3,7/2,2 kW Bodpfsywur Nox Ad Dswl Min indexing C-axis main spindle 0,001 ° Min indexing C-axis sub spindle 0,001 ° Number of tools on turret 16x Spindle speed driven tools 8.000 R/min Bar feeder FMB Turbo 3-26 (3200) LxWxH 6850x1150x1765 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2014, condition: ready for operation (used), Three similar Tsugami Swiss-type CNC lathes are available. Years of manufacture: 2014/2016/2016, max. bar capacity: 32mm, max. machining length: 320mm, max. drilling diameter main spindle/counter spindle: 12mm/10mm, speed: 8000rpm, tool stations: 31, max. slot milling cutter diameter: 45mm, rapid traverse Z: 32m/min, rapid traverse X/Y: 24m/min, resolution: 0.1mm. Machine dimensions X/Y/Z: approx. 2150mm/1300mm/2050mm, weight: approx. 3500kg, control: Fanuc, operating hours 1/2/3: approx. 12265h/39970h/39470h. Documentation available. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Bwodpeyz An Hsfx Ad Djl

Condition: excellent (used), Year of construction: 2014, operating hours: 31,000 h, functionality: fully functional, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, subspindle, high pressure pump, Bwodpoytq Ahefx Ad Djl oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) Bodpfx Adeh Hvk Ae Dowl - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Year of construction: 2003, condition: ready for operation (used), Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement. Bodpjyypmyofx Ad Djwl

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: 01312012-5, 7 axes simultaneous, control Fanuc 32i-A Manufacturing origin Taiwan Voltage 400/50/3 Netweight 2400 kg Custom position 8458.11 20 Dimensions 2605 x 1420 x 2150 mm TECHNICAL DATA : - max turning dia of main spindle 20 mm - max turning dia of sub spindle 20 mm - max turning length (fixed guide bush) 200 mm - max turning length (rotary guide bush) 85 mm (option : 150 mm) - max turning length (non guide bush) 45 mm - max drilling capacity of main spindle 10 mm - max drilling capacity of sub spindle 10 mm - max tapping capacity of main spindle M8 - max tapping capacity of sub spindle M8 - max cross drilling capacity 10 mm - max cross tapping capacity M6 - number of external turning tools 8 pcs - number of internal turning tools 5 pcs - number of cross drillings 4 (option : 7) - face tool holder (sub spindle) 4 pcs - size of tool 12 x 12 x 90 mm - number of axis controls 7 (X1/Y1/Z1/X2/Z2/C1/C2) - bore of spindle 29 mm - spindle speed range 200 ~ 8000 t/min - rapid traverse X / Z 24 m/min - main spindle motor 3.7 kW - sub spindle motor 2.2 kW - motor axis X1 / Z1 0.5 / 0.75 kW - motor axis Y 0.75 kW - cross drilling motor 0.75 kW - end drilling motor 0.75 kW - motor axes X2 / Z2 0.5 / 0.5 kW - coolant motor 0.375 kW - power requirement 15KVA errors and omissions excepted data gived without obligation Inventory nr. 1120009, standard accessories Spindle servomotor External tool holder (8-tool) Internal tool holder (5-tool) Parts catcher Tools & toobox Lighting device Non guide bushing holder Cutting coolant (pump 4T6-6) Lubrication device Operational manual Pressure pushing shank 2 sets Guide bushing x 1 (TD-25S type 16°) Collet chuck x 2 (TF-25 type 16°) Side drilling tool holder (7 tools) Sub-spindle Bedpfx Aed Hr Imjd Dowl Part conveyor Double C axis Fixed drilling tool holders for sub-spindle x2 Drilling and milling tool holder for sub-spindle External turning tool holder for sub-spindle Sub-spindle tool holder for 4-position excentric end drilling Cutting coolant inspection Formal CE Fixed guide bush holder (TD-25 S type 16°) Chip conveyor with cart Transformer Coolant chiller High pressure coolant blocks

Condition: excellent (used), Year of construction: 2019, CNC Lathe TAKAMAZ XY120PLUS Japan Year of manufacture: 2019 - Control system: Fanuc Oi-TD - Machining hours: 3,600 hours - Functionality: fully operational Axes: - X1 axis (150 mm) - Z1 axis (330 mm) - Y1 axis (+/- 35 mm) - Main turret: 24-tool stations with driven tools - C1 axis Sub-spindle: - X2 axis (150 mm) - Z2 axis (440 mm) - C2 axis - Small turret with 12-tool stations Machining capacity: - Max. turning diameter: Main 170 mm / sub 135 mm - Max. turning length: 330 mm - Bar capacity: Main Ø52 mm / sub Ø20 mm - Spindle speed: up to 5,000 rpm Bedpfx Adjx Sxl Ae Dowl - Sub-spindle speed: up to 5,000 rpm - Automatic parts catcher with parts conveyor belt - Chip conveyor (tube type) - Machine documentation - Driven tool holders: 6 pcs (3/3) - Interface for bar feeder - Dimensions (L x W x H): 2,630 x 1,950 x 1,730 mm - Machine weight: 4,500 kg

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Bedjwz Rifspfx Ad Dswl Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Year of construction: 2004, machine/vehicle number: 2420701, CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year 2004, serial no. 160024, - robot cell, - 7 clamping devices, - 3 rigid tool holders simple, - 3 rigid tool holder multiple, - 4 powered tool holders, - Suction Büchel Bedpfx Aslmkucod Dewl Handlings and assembly robot cell Stäubli Unimation incl. basket translator with basket stack for raw and finished parts, two shuttles on top of each other for supply/removal baskets, Integrated measuring station Commissioning 2021 Connected load 24 kW, control, make Index, type C200-4D (Siemens 840 D basis), - 2 steering positions, - 6 spindles, - travel X/Y 300 x 500 mm, - bar diameter max. 52 mm, - - spindle speed max. 5000 rpm, -12 tool carriers, coolant system, - Industrial robot, make Stäubli, - programming panel, - extraction device, - settling device, - Accesories

Condition: good (used), Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock Travel: 175 mm Tailstock Spindle Taper: Morse Taper: MT4 Quad Stroke: 140 mm Quad Diameter: 95 mm Driving Force: 17 kN Power Supply: 50 Hz, 3x: 380 V Total Power Requirement: 65 kVA Bsdpfex Elw Eex Ad Dowl Spindle Speeds: Infinitely Variable from 0 rpm to 4000 rpm Spindle Bore: 77 mm Tool Shank Cross-Section: 25x25 mm Swing Diameter over Bed: 420 mm Maximum Swing Diameter: 250 mm Turntable Slide: Longitudinal Travel (Z-Axis): 1150 mm Cross Travel (X-Axis): 230 mm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our Shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1100026, spindle speed (max.): 3,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 4,500 rpm, number of slots in tool magazine: 19, Machine has been professionally cleaned TECHNICAL DETAILS Control: Siemens 840D Bwodpfowr Ducsx Ad Dsl Spindle Technology: Belt-driven spindle Spindle bore: 51 mm Speed: 4,500 rpm Workpiece clamping: Collet chuck, Hainbuch size 65 Tool Carrier I (XZ) Technology: Cross slide, 4 pcs Travel in X: 70 mm Travel in Z: 115 mm Tool mount: Turning tool holders Tool Carrier II (X/Z) Technology: Turret with 7 stations and pick-up spindle Tool mount: VDI30 Tool drive: 3,000 rpm Workpiece clamping (pick-up spindle): Collet chuck Travel in X: 160 mm Travel in Z: 500 mm Tool Carrier III Technology: Turret with 8 stations Tool mount: VDI30 EQUIPMENT - Chip conveyor - Coolant management, KSS pumps - Bar loader, Gucchi Giovanni DB Evo - Collecting tray with conveyor belt - Mechanically prepared interface for oil mist extraction - Electronic handwheel for setup mode - Clamping devices and tool holders are not included in the scope of delivery

Condition: excellent (used), Year of construction: 2014, operating hours: 5,650 h, functionality: fully functional, machine/vehicle number: 243-0011, CNC AUTOMATIC LATHE TORNOS EVODECO 16/10 Bwodokhnqgjpfx Ad Del with bar-feeder LNS Fanuc 31iB - 5646 hours Manufacturing origin CH Voltage 400 V Netweight 2700 kg Dimensions 2135x1250x2114 mm TECHNICAL DATA Number of axes 10 Number of spindles 2 Main spindle Maximum bar diameter 16 mm Maximum machining length 180 mm Spindle speed 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Counter spindle Maximum bar diameter 16 mm Spindle speeds 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Tool gang 1 Number of positions 5 Number of motorized positions 3 Rotating tool speed 8'000 min-1 Tool gang 2 Number of positions 5 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 End attachment Number of positions 4 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 back operation Number of positions 6 Number of motorised positions 6 Rotating tool speed 8'000 min-1 Power supply Supply voltage 400V Errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Fanuc 31i, turning bush, pcs catcher, pcs conveyor, pce ejector, coolant tank, Robobar SBF-532 bar3600mm Manufacturing origin Japan Voltage 400V Netweight 3000 kg Dimensions 240x138x205 cm Total power Custom position 8458.11 20 TECHNICAL DATA Number of axes 8 Number of spindles 2 Control Fanuc 31i Main spindle Max bar diameter 25.4 mm Travel 230 mm Speed 10'000 min-1 Power 5.5 kW C-axis indexing precision 0.1° Counter-spindle Max bar diameter 25.4 mm Spindle speed 10'000 min-1 Power 5.5 kW Bwoded Hihyjpfx Ad Del C-axis indexing precision 0.1° Number of guide bushes 2 Guide bush 1 Number of positions 10 Number of motorised positions 4 Live tools speed 10’000min-1 Guide bush 2 Number of positions 6 Number of motorised positions 2 Live tools speed 10’000min-1 End-attachment Number of positions 4 Secondary operations Number of positions 2 Voltage 400V Installed power 14kW errors and omissions excepted-data given without obligation Inventory nr.2180201, machine equipped with : Control Fanuc 31i Rotating guide bush Parts catcher Parts conveying band Parts ejector Coolant tank Bar-feeder Robobar SBF-532, longueur barre max 3600 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14891, Year 2012 with Fanuc 18i-TB Fully inspected by Citizen and ready for production Country of manufacture: JP Voltage: 200V/50-60Hz/3ph. Dimensions: 1400x900x1300 mm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS Controller: Fanuc Series 18i-TB 6 axes: (X1/Y1/Z1/X2/Y2/Z3) Maximum bar diameter: Ø 4 mm Maximum turning length: 40 mm Main spindle, max. speed: 16,000 rpm (12,000 rpm) Indexing: 1° Maximum speed of driven tools: 8,000 rpm Sub-spindle, max. speed: 10,000 rpm, 1° indexing Bwsdpfxsw T S Ilj Ad Dsl Tool posts: total of 8 tools Guide bushing unit: standard Technical data provided subject to errors and omissions.

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours Bodoxrfunjpfx Ad Djwl MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Integrated PC with Windows 10 operating system 21.5" color touchscreen Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)