Used Avantra 30 for sale (25,252)

Condition: used, machine/vehicle number: 8FBMKT30-13087, Year of construction: 2020, operating hours: 861 h, lifting height: 4,700 mm, free lift: 1,080 mm, fuel type: electric, battery manufacturer: Exide, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,400 mm, Weights Empty weight: 5.829 kg Functional Lifting capacity: 3.000 kg Maximum passing height: 223,5 cm Supply voltage: 80 V Other information Remanufactured: Yes Ihsdpfx Adou Thrcowst Tyre brand: SE nicht kreidend Marangoni Front tyre size: SE nicht kreidend Rear tyre size: SE nicht kreidend Fork carriage: Integral sideshift Transport dimensions (LxWxH): 2,4x1,195x2,235 Additional information Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 8FBMKT30-10983, Year of construction: 2016, operating hours: 5,535 h, lifting height: 5,500 mm, fuel type: electric, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,500 mm, Empty weight: 5.677 kg Lifting capacity: 3.000 kg Supply voltage: 48 V Remanufactured: Yes Front tyre size: SE nicht kreidend Rear tyre size: SE nicht kreidend Iodpoqzv Tbefx Adwoht Transport dimensions (LxWxH): 2,42x1,19 Please contact Karl Leitner for more information

Year of construction: 1980, condition: good (used), SHIKI model PC 30, year 1980, 1x letterpress (2 colors); laminating unit; punching unit; longitudinal cut, 2 hot foil plates, in a good condition, immediately available Iodoh I D Dnopfx Adwoht

Condition: new, Year of construction: 2025, THEOR 30 screw compressor equipped with an inverter from the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high performance of the device guarantee efficient and trouble-free operation. Our company has been on the market for several years, we have extensive experience in the distribution of piston and screw compressors. As a European Manufacturer, we provide our clients with proven and recognized pneumatic solutions. Technical data Power 22 kW Power supply 400V/50Hz Theoretical air flow 3,2 m3/min Actual air flow 2,803-3,09 m3/min Dimensions 1380 x 850 x 1160 mm Weight 430 kg Ihedpfx Adsmt Dt Iswot Most important advantages: INVERTER - The continuously variable compressor speed control system is the most economical control method. The most important advantage is lower energy consumption and maintaining a constant set pressure compared to conventional compressors hard, compact construction of screw compressor from the European producer specially designed cooling system ensures optimal working conditions even at high load of the device connection of the cooling system to the module through good quality hydraulic wires this technology allows significant energy saving special construction of air outlet for effective work efficient and solid pump installed in compressor unique filtration system with triple separation for effective work efficient motor with power 22 kW made in IP54 standard using a belt transmission, which ensures high effective efficiency lower noise of screw compressor thanks to apply specially designed soundproofed case (soundproofing plates) electronic controller from MAM series allow to set parameters: time between service inspections, power failure alarms, phase change, phase loss, overheating, other, work in Master / Slave mode, it is possible to connect up to 16 devices in the pneumatic network, possibility of remote control by means of a computer and other The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Iedpfxoihvtgs Adweht

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Ijdpfx Ajfh Tmmjdwjht Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 500/30, type of input current: three-phase, overall weight: 2,400 kg, power: 64 kW (87.02 HP), We offer a complete solution for recycling waste materials/by-products with our APM/500/30 Compact pellet line. With this, you can convert waste materials into various usable products, such as: fire pellets, feed pellets, poultry litter, manure pellets. etc. We have more than 20 years of experience in this industry. This machine is a mature technology that allows you to work quickly and efficiently, we produce all its parts ourselves and the supply of parts is continuous. We are a European Union company. We have production lines in Canada, the Netherlands, Belgium, Poland, Hungary, Slovakia, Romania. We can manufacture machines according to all relevant CE, UL, CLA standards, upon request We have resellers in Canada and Belgium For production, you can use, for example, sawdust, alfalfa, straw, sunflower seed hay, etc. The maximum moisture content of the raw material for pellet production is 15% The advertised APM 500/30 compact pellet line includes the following units and can produce 0.5 T/h pellets: 1. Hammer mill 2. Conditioner, 3. Pellet press, 4. Pellet cooler, 5. Big-bag packaging unit 6. Automatic control cabinet 7. Conveyor belts. The price is 68,000 euros We also have 1 ton/h pellet lines for 123,000 euros called APM 500/30 Compact Tandem, and the APM 500/30 Compact can also be expanded later on if needed The pellet line is ready for use within 2-3 hours after delivery! If you are interested in the equipment, write an e-mail or call us Ihedpfeht U Hxox Adwst

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: Ihsdpfx Astmtzkodwst wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Ihodpfotmty Nsx Adwet Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side 4 pcs. Width slide units (welding press slides) Ihsdpfx Aswxarqedwjt 1 pce Welding sytem BIHLER B 1000 Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm control: CNC Haas spindle passage: 76 mm revolution per minute: max. 3400 steples U/min tailstock taper ISO: Ø 290 tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: 360/ 400 V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Electric coolant system provided. Tool measuring system available. I.D. * Isdpjvvt Emefx Adwsht

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 30 mm bore stroke: 200 mm Iodou Idt Nopfx Adwoht drill spindle - Morse Taper: MK3 spindle throat: 350 mm spindle distance: Mittenstand: 490 mm headstock adjustment: 500 mm feed:: 0,07; 0,15; 0,25; 0,33 / 4step mm/U feed:: manuell und automatisch spindle speed:: 70 ... 1.600 / 8step U/min distance between table/spindle: max. 430 mm distance between table/spindle: min. 180 mm table surface area: 1820 x 400 mm table adjustment: 250mm mit Handkurbel mm total power requirement: 10,8 kW dimension machine xH: ca. 1,0 x 2,1 x 2,8 m All spindle heads with clockwise and counter-clockwise rotation Drill head 1 to 3 clockwise and counter-clockwise rotation without tapping function Drill head 4 with automatic thread-cutting function, rawhide chuck up to Ø 33mm All drill heads and the table are height-adjustable. Equipment: Coolant supply i.D. *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Iedpfx Aeu Icnfedwjht Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, Year of construction: 1974, Technical details: pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm strokes per minute: 20 - 120 stroke: ca./approx. 20 mm mm adjustment of stroke: nein/ no stroke adj. mm dayligth: Arbeitsraum: 220 - 280 mm Table surface area useable: 600 x 600 mm total power requirement: 7,5 kW weight of the machine ca.: 5,0 t dimensions L x W x H: Maschine: 1,8 x 1,2 x 2,7 m Dimensions (LxWxH): Schaltschrank: 0,92 x 0,46 x 1,4 m Automatic punching press 4 columns mechanical with feed unit with control panel passage widths: Column opening front=350mm and side=258mm Ihodpfju Icx Rsx Adwst *

Condition: used, Technical details: Ihedpou R A Dlsfx Adwst length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, Year of construction: 1986, Technical details: weight: 7,5 kg Iodpfou Nkk Rex Adwjht number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN accessories: copy of documentation available 13 pcs available i.D. *

Condition: used, Technical details: pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m Ijdpfx Aju Nfnwjdweht - Press with two ram with 30 t + 80 t - foot control - documentation *

Year of construction: 2017, operating hours: 6,417 h, condition: ready for operation (used), General Data Machine weight 4400 kg Movement X-Axis Movement 600 mm Z-Axis Movement 400 mm Y-Axis Movement 400 mm Main Drive Number of axis 4 Iedpfjx Nr N Nex Adwjht This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, mileage: 1,76,000 km, power: 85 kW (115.57 HP), fuel type: diesel, overall weight: 3,000 kg, maximum load weight: 670 kg, first registration: 09/2011, emission class: euro5, number of seats: 3, Equipment: ABS, power assisted steering, For information Ihjdpfx Asyaqytjdwst

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 6,605 kg, construction height: 2,000 mm, fuel type: electric, total length: 5,310 mm, drive type: Elektro, arm reach: 6,250 mm, construction width: 1,190 mm, working height: 10,890 mm, Articulating telescopic boom lift Speed class: 4.8 Technical condition: new Ihjdpfoxqk Auox Adwst Battery condition: new

Condition: new, machine/vehicle number: abc6276e1749f9dddc494eb32, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5², Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Iodpfx Adsi Ri H Iowjht with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, Used machine Year of manufacture: 1989 Completely overhauled! Very good condition Material width: 630 mm Material thickness: 7.00 mm Number of straightening rollers: 23 Sheet thickness - min.: 0.30 mm Straightening roller diameter: approx. 30 mm Workpiece dimensions: min. 50 mm Speed: 10 m/min Frame opening: approx. 650 mm Total power requirement: 5.50 kW Machine weight: approx. 6.00 t Space requirement: approx. 2.65 x 1.80 x 1.50 m Ihodpfx Ajx I Htajdwst Hydraulic straightening machine - max. vertical roller gap 7.50 mm - Infeed with conveyor belt – speed adjustable - with hydraulic opening of the roller housing - with automatic oil lubrication for gearbox and universal joints - Main drive motor 4 kW - Digital measuring device

Condition: used, mileage: 2,24,000 km, power: 96 kW (130.52 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in load/passenger compartment, 240 A alternator, LED cargo area lighting, smoker's package, sliding door on the left side of the load/passenger compartment, start-stop system, AGM battery 80 Ah (2 batteries) Additional equipment: Driver's airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, integrated indicator in exterior mirrors, on-board computer, entry lights, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without glazing (180-degree opening angle), interior pollen filter, body type: high-roof panel van, body variant: medium-height roof, high load compartment partition behind driver and passenger, without window but with lower through-loading option, steering column (steering wheel) adjustable for height and reach, truck registration, model update, engine 2.0 L - 96 kW TDCi CAT, parking assistance system, front and rear parking sensors, wheelbase 3300 mm, spare wheel with road tires, low emissions according to Euro 6d-TEMP standard, gear selector/shift knob in leather, windshield wipers with interval control, adjustable, H4 headlights, sliding door right side of load/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, Seat Package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, partly painted bumpers, Style color package, LED daytime running lights, Trend, tinted glazing, half-height trim in load/passenger compartment, side lashing rails in load compartment, lashing points (8), slightly tinted heat protection glazing Iedevrallepfx Adwoht Cooling system: Special equipment: For pharmaceutical transport (PHARMATRANSPORT) Transcool Multi-temperature system With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (technical inspection).

Condition: used, mileage: 35,694 km, power: 75 kW (101.97 HP), first registration: 02/2021, fuel type: diesel, next inspection (TÜV): 10/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, trailer coupling, * Appointment required for consultation and test drive = reduced waiting times: * Time is valuable, and you shouldn't spend it waiting. Therefore, we kindly ask you to arrange an appointment by phone for a consultation or test drive. * Non-smoker * This vehicle has a well-maintained digital service history at VW. * Last service performed at 32,484 km. TRANSMISSION / CHASSIS * Engine: 2.0 L - 75 kW TDI * 6-speed gearbox APPEARANCE * Radiator grille with upper chrome strip * Front bumper in grey * Candy White LIGHT & VISIBILITY * Daytime running lights * LED interior lighting in the load/passenger compartment * LED interior lighting in the cab * Laminated windshield * Left convex exterior mirror * Right convex exterior mirror * Headlight range adjustment * LED indicator lights integrated in exterior mirrors * Exterior mirrors adjustable from outside ENTERTAINMENT * Digital radio reception (DAB+) * Voice control system * Multifunction display Plus * Mobile phone interface Bluetooth * Mobile online services App-Connect Wired and Wireless * Voice operation * Discover Media radio navigation system with 20.3 cm (8-inch) touchscreen, including streaming and internet * 4 speakers: 2 tweeters, 2 woofers * ECE region code for radio * Pre-installed for We Connect and We Connect Plus ASSISTANCE SYSTEMS AND SAFETY * Reversing camera * Driver assistance system: Hill Start Assist * Driver assistance system: Crosswind Assist * Emergency call system * Engine start/stop system * Three-point automatic seat belts with height adjustment in front and electric belt tensioner for the driver * Central locking with remote control and interior operation * Electronic Stability Program (ESP) * Anti-lock Braking System (ABS) * Immobiliser (electronic) * Electromechanical power steering * Driver’s airbag * Dual-tone horn Ihsdpfxexv Un Sj Adwjt COMFORT * Adjustable steering column (steering wheel) * Climatic air conditioning (cab) * Cab seating: double passenger seat with storage compartment * Cab seating: driver's seat adjustable * Lockable glove compartment * Heat-insulating glazing * Storage package 2 * Entry handle on rear left D-pillar * 12V socket and 4 cup holders in the dashboard * Two sun visors, foldable and side swiveling * 12V sockets in the cab (4 in total) * Sliding door to the load/passenger compartment on the right * Grab handles on A-pillars * Entry handle on rear right D-pillar * Lashing eyes in the load compartment * Rubber flooring in the cab * High bulkhead without window in load compartment * Seat belt warning system (driver's side) * Grab handle on partition wall in load/passenger compartment * Operating voltage 12 V * Wooden flooring in load compartment * High wood paneling in load/passenger compartment * Electric front windows OTHER * Low emissions according to Euro 6d-TEMP standard * Trailer coupling: fixed ball head * Truck registration * Permissible gross vehicle weight: 3.00 t * And much more * All information without guarantee. They do not constitute an agreed quality. Subject to errors and prior sale. * Our services: * Financing possible even without down payment * Registration service * Trade-in of your used car * Delivery available * Tire service, winter and summer tires available at extra cost * We also speak several languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech,

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: W301002, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 265 mm # Distance between spindle noses: 1080 mm # X1/X2-axis travel: 195 mm / Rapid traverse in X: 12 m/min # Z1/Z2-axis travel: 265/780 mm / Rapid traverse in Z: 24 m/min # B-axis travel (right spindle): 850 mm / Rapid traverse in Z: 24 m/min Spindles # Spindle as per DIN 55026: Size A2-6 # Maximum speed: Left & Right 50–5000 rpm # Power at 100% duty cycle: Left 11 kW / Right 11 kW # Main spindle special feature: Optional dual command clamping cycle for 2-stage chuck clamping # Bar capacity: Left spindle 51 mm / Right spindle 51 mm Two Tool Turrets # Tool interface: BMT55 # Number of stations: 12-position disc turret Electrical Equipment # Operating voltage: 200/220VAC +10%/–15%, single-phase, 50/60 Hz # Connected load: 54 kVA (connection 61 VA) Dimensions # Machine dimensions (L×W×H): 3645 × 1875 × 1970 mm Ijdpfxoxw Uh Is Adweht # Weight: 10,800 kg Main Features and Capabilities: # Horizontal construction: Optimal chip evacuation and easy part handling # CNC control: Fanuc 6i-TT # Chip conveyor # Automation interface for gantry loader available # Main spindle fitted with Autoblock Chuck 265 TXS # Each turret equipped with 2 external tool holders # Documentation: Electronic not available / Hardcopy available Machine status: RUNNING/IN OPERATION