Used Bagging Machine for sale (84,167)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: X88628, clamping force: 6,600 kN, screw diameter: 84 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, The cylinder, screw, and screw tip of the injection system were replaced a year ago! TECHNICAL DETAILS Clamping Unit Clamping force: 6,600 kN Platen size (H x W): 1,370 x 1,370 mm Dcsdpfox A Avqsx Adder Tie bar spacing (H x W): 900 x 900 mm Minimum mold height: 400 mm Maximum mold height: 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 29,300 kg Weight of injection unit: 7,700 kg EQUIPMENT Pneumatic valves (4 pcs) Cores: (1 pc)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS X-axis travel: 1,600 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Maximum spindle speed: 6,000 rpm Dcodpfxox Ap S Ej Addjr Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Control unit: Heidenhain iTNC 530 Note: The machine can be inspected under power until week 50.

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q Dcsdpfxjx Af S Ue Addor MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass Dedpfox A Hagox Addecr ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Dcsdpfx Aex A Uu Eodder Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 6197, Submitting a bid obligates timely collection by 15.01.2026! Auction of a Thalmann THAKO folding machine! EQUIPMENT Dcodpfx Ajx Daikjddsr Depth stop Automatic program with stored sheet metal shapes

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg Dcodpfx Adex A At Njdor EQUIPMENT Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 4,800 dpi, paper weight (min.): 52 g/m², paper weight (max.): 360 g/m², counter reading (black): 8,94,166, counter reading (color): 15,13,515, TECHNICAL DETAILS Dedpfx Aex Ecp Asddscr Paper weight (min.): 52 g/m² Paper weight (max.): 360 g/m² Speed: 85 A4 pages/minute Resolution: 2,400 x 4,800 dpi Paper formats: A6 to 330.2 x 487.7 mm Banner sheet option: up to 330.2 x 1,260 mm MACHINE DETAILS Operation: 17-inch color touchscreen Warm-up time: < 300 seconds Counter reading color: 1,513,515 clicks Counter reading B/W: 894,166 clicks EQUIPMENT Vacuum Feed LCIT RT5120 (2,200 sheets each, incl. Bridge Unit BU5010) Decurl Unit DU5060 Booklet Finisher SR5060 (stacking up to 3,000 sheets, stapling up to 100 sheets, booklet stitching) EFI Color Controller E-45A (Fiery FS300 Pro) with 1 TB HDD, 8 GB RAM, Windows 10 Enterprise EFI Impose (imposition and gang printing) ES-2000 (UV & Non-UV) spectrophotometer TCRU/ORU Type S9 (Set A) ORU Type S9 (Set B)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 47,870 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, table load: 10,000 kg, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Table load capacity: 10,000 kg Spindle taper: ISO 50 Standard spindle speed: 6,000 rpm Spindle motor (continuous / 30 min): approx. 22/26 kW Tool changer capacity: 32 tools Max. tool diameter: Ø 127 mm / Ø 215 mm Dcodpfsx Agh Rox Addor Max. tool length: 350 mm Max. tool weight: 20 kg Rapid traverse X-axis: up to 20,000 mm/min Rapid traverse Y-axis: 15,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Cutting feed: approx. 1 – 10,000 mm/min MACHINE DETAILS Program runtime hours: 47,870 h EQUIPMENT Extension of equipment to automatic head changer with angular milling head

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP Djdpfjx Dbtwox Addscr - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage Djdox A Efhepfx Addjcr EQUIPMENT Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Djdpfx Adjxywupjdjcr Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X81456, clamping force: 9,000 kN, screw diameter: 98 mm, injection pressure: 1,650 bar, ejector stroke: 300 mm, controller model: CDS700, Injection molding machine including Sytrama robot! TECHNICAL DETAILS Dcedpfx Adsx A Ar Ejdsr Clamping Unit Clamping force: 9,000 kN Platen size (H × W): 1,570 × 1,560 mm Tie bar spacing (H × W): 1,010 × 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. daylight: 2,290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Shot volume: 4,010 cm³ Shot weight (PS): 3,690 g Injection pressure: 1,650 bar Max. injection speed: 400 mm/s MACHINE DETAILS Control system: CDS700 Clamping unit weight: 44,500 kg Injection unit weight: 12,500 kg EQUIPMENT Pneumatic valves: 4 units Core pulls: 1 fixed / 1 movable Sytrama 101 GL robot

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging plant. The system was acquired in 2024, is dismantled, newly packaged, and has never been operated. The original price of the machine was €235,000! TECHNICAL DETAILS (according to manufacturer) Capacity: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag type: paper (2–5 layers) with PE inner bag or PE Weighing range: 10–30 kg Weighing accuracy: 2 sigma +50 g/-0 g Weighing accuracy: PTB compliant MACHINE DETAILS Control voltage: 400 V, 50 Hz – 24 DC, 3-phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors, gearbox: SEW Pneumatic components: Festo Material: stainless steel DIN 1.4301 Cable tray: brand Cablofill Protection class: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21 for 500–1000 mm radius, zone 22 Dcedpjxz Eapofx Addjr Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air consumption: 400 Nl/min Protection class: IP54 Dust extraction air: 45 m³/min Note: Further data regarding the machine can be found in the attached order confirmation.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available Dsdpoxzfwbjfx Addjcr MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, displacement volume: 1,155 cm³, injection pressure: 1,482 bar, ejector stroke: 250 mm, TECHNICAL DETAILS Djdpfxex Dbp Ss Addocr Clamping Unit Clamping force: 4,000 kN Mounting platen (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Opening stroke: 950 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1,482 bar Shot volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Rated power pump motor: 45 kW EQUIPMENT Oscillating elements 2 x 24-way water manifold Material hopper Degassing screw Robot interface 4 x hydraulic core pulls

Condition: ready for operation (used), functionality: fully functional, working width: 2,500 mm, bending angle (max.): 90 °, sheet thickness (max.): 4 mm, overall weight: 4,300 kg, TECHNICAL DETAILS Bending angle: 0 - 90 degrees Bending width: 2,500 mm Max. bending thickness: 4 mm Max. jaw opening: 100 mm MACHINE DETAILS Weight: approx. 4,300 kg EQUIPMENT Djdpex A Uf Dofx Addscr Additional tools (as per images) Wiring diagram

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Dodpfsx Aph Hjx Addocr Positions: 40 CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need fior additional installation. Condition: New Laser Type: Fiber Laser Dedpfx Adjhv U Txjdjcr Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2280 Measurements depth 3350 mm Measurements height 2500 mm Machine weight 7200 kg Dcsdox D Eazopfx Addor Main Drive Number of axis 6 Movement X-Axis Movement 510 mm Y-Axis Movement 970 mm Z-Axis Movement 420 mm V-Axis Movement 210’ A-Axis Movement HSK 63 swivel angle 360 degree B-Axis Movement +/- 20 degree This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine. Application Types EDM

Condition: refurbished (used), The Handtmann PVLH 226 is an essential component for automating sausage production, offering high-speed, consistent linking and hanging. Buying this unit fully refurbished provides industrial automation capabilities without the new equipment price tag. Dcedpfjxu Tt Dsx Addjr High-Speed Performance & Automation Exceptional Throughput: Achieves a maximum portioning speed of Up to 1,000 portions/minute, significantly boosting your production rate and efficiency. Complete Automation: Automatically links and hangs strings of sausage onto the smoking stick (Hanging Unit AHE 242–16 included), directly preparing them for the smokehouse or oven. Reduced Labor Costs: Eliminates manual hanging, reducing labor time and potential for human error. Precision & Product Versatility Precise Portion Length: Features an adjustable portion length range from 25 mm to 600 mm, offering flexibility to produce various sausage products. Wide Casing Caliber Range: Handles a broad spectrum of casing sizes, accommodating: Peel-Off Casing Caliber: 13 mm to 50 mm Natural Casing Caliber: 15 mm to 50 mm Consistent Linking: Ensures every link is uniform in length and tension, resulting in a premium, professional-looking final product. Reliability & Integration Robust Construction: Heavy-duty, stainless-steel design built to withstand rigorous industrial washdown and production environments. Seamless Integration: Designed to pair perfectly and synchronize with all Handtmann Vacuum Fillers (VF series), ensuring reliable operation as part of a complete line. Refurbished Reliability: This unit has been completely restored, guaranteeing all critical mechanical and electrical components function to original factory specifications

Condition: refurbished (used), total length: 1,200 mm, total width: 1,220 mm, total height: 2,040 mm, warranty duration: 6 months, overall weight: 475 kg, input voltage: 380 V, type of input current: three-phase, power: 3 kW (4.08 HP), The VF610 provides the core benefits of this stuffer with a focus on compactness and user-friendly operation. Condition: Fully Refurbished—Guaranteed reliability and production-ready upon arrival. Space-Saving Footprint: Compact dimensions (1,200 mm x 1,220 mm) make it perfect for facilities with limited floor space. Dcedpexu Trysfx Addjr Consistent Output: Solid filling capacity of up to 2,000 kg/Hour for steady, day-to-day production. Precision Portioning: Excellent weight control across the range, from 5 gr. up to 100,000 gr. (100 kg), minimizing material giveaway. Versatile Pressure: Filling pressure of 25 (40) bar is highly effective for most standard sausage and viscous products. Superior Product Quality: Utilizes the Handtmann vane cell system to ensure air is gently removed from the product, resulting in consistent texture, better color, and extended shelf life. User Control: Features the modern Compact Control System for easy programming and fast recipe changes. Flexible Hoppers: Comes with dual hopper options (40 / 100 liters) to suit small batch work or larger runs.

Condition: refurbished (used), The Handtmann PVLH 228 is an ultra-high-speed, fully automatic linking and hanging line engineered for industrial throughput. This unit is essential for processors looking to maximize their automation, dramatically increase portioning capacity, and maintain flawless product quality across various casing types. Extreme Speed & Throughput Maximum Velocity: Achieves an industry-leading portioning capacity of Up to 2,000 portions per minute when processing peel-off and collagen casings. High Natural Casing Speed: Maintains a rapid pace of Up to 1,000 portions per minute for natural casings, preventing bottlenecks in your production line. Reduced Overhead: Direct automation of the linking and hanging process substantially lowers labor costs and minimizes manual handling risks. Advanced Linking Technology 2-Nozzle Revolver System: Utilizes a highly efficient 2-nozzle linking technology that ensures continuous operation, fast casing changes, and minimal downtime. Dcsdpfx Asxu Tuhsddjr Precision Linking: Guarantees uniform link lengths and twists, ensuring a premium, consistent product appearance and weight accuracy. Standard Voider: Equipped with a standard voider to ensure perfectly filled, air-free sausages, maintaining optimal product texture and appearance. Casing Versatility & Reliability Casing Compatibility: Fully compatible with the most common casing types in commercial use: Natural, Collagen, and Peel-Off casings. Wide Caliber Range: Handles casings with a diameter from 13 mm to 50 mm, offering flexibility across your entire sausage portfolio. Flawless Integration: Designed for perfect electronic and mechanical synchronization with all modern Handtmann Vacuum Fillers (VF series), ensuring a reliable and efficient production flow.

Condition: refurbished (used), total length: 2,120 mm, total width: 1,600 mm, total height: 2,250 mm, warranty duration: 6 months, overall weight: 1,165 kg, input voltage: 380 V, power: 4.5 kW (6.12 HP), The Handtmann VF612 is renowned for its versatility and superior product quality, making it ideal for a wide range of sausage, meat, and food products. Model: Handtmann VF612 Stuffer / Vacuum Filler Condition: Fully Refurbished (Ready to plug and produce) High Filling Capacity: Up to 3,000 kg/Hour for efficient, high-volume production. Dodpfx Adoxtigdedscr Exceptional Portioning Accuracy: Utilizes the reliable Handtmann vane cell feed system for minimal product giveaway. Precise Portioning Range: Versatile portion sizes from 5 gr. to 100,000 gr. (0.005 kg – 100 kg). Powerful Filling Pressure: Up to 35 (50) bar to handle even the firmest or coldest product masses, including dry sausage. High Portioning Speed: Capable of up to 600 portions/minute (product dependent). User-Friendly Control: Equipped with a Compact Control System (often an intuitive touch-screen interface) for easy program setting and product changeover. Hopper Capacity: Flexible 90 / 240 liters capacity. Construction: All stainless-steel design for maximum hygiene and easy cleaning.

Condition: refurbished (used), total length: 2,250 mm, total width: 1,600 mm, total height: 2,120 mm, overall weight: 1,165 kg, input voltage: 380 V, power: 6 kW (8.16 HP), The VF616 offers significantly higher performance than standard fillers, making it the ideal choice for businesses transitioning to high-volume or heavy-duty products. Dedpfxsxtigqs Addscr Condition: Fully Refurbished — Zero compromise on performance or reliability. Industrial Throughput: Massive filling capacity of 3,600 kg/Hour to handle demanding production schedules. High-Pressure Filling: Powerful 45 bar filling pressure, perfect for firm, cold, or highly viscous products like dry sausage, cured meats, and dense patés. Supreme Versatility: Expanded portioning range from 5 gr. up to 200,000 gr. (200 kg), accommodating everything from snack sticks to bulk fills. Handtmann Vane Cell System: Guarantees perfect evacuation and gentle product treatment for bubble-free, consistent texture and longer shelf life. Control System: Intuitive Compact Control System for quick setup, precise parameter management, and easy integration with linking, hanging, or forming attachments. Robust & Hygienic: Heavy-duty all stainless-steel construction built for intense industrial environments and effortless washdown.