Used Baghouse Dust Collector for sale (4,080)

Condition: used, Year of construction: 2017, power: 2.2 kW (2.99 HP), input voltage: 400 V, volume flow: 1,593 m³/h, suction capacity: 1,593 m³/h, filter area: 9.5 m², total height: 2,200 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, negative pressure: 2,200 Pa, nominal power: 2.2 kW (2.99 HP), space requirement height: 2,200 mm, space requirement length: 1,800 mm, space requirement width: 1,000 mm, transport length: 1,800 mm, transport width: 1,000 mm, transport height: 2,200 mm, tank capacity: 240 l, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Extraction diameter 140 / 160 mm, can be changed using a reducer Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. Bodpfsygbbhox Agkjwi The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical specifications: - Galvanized sheet steel construction - Space-saving thanks to compact design - Delivered ready for operation - ATEX - pressure shock resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller - Energy-saving motor of efficiency class IE4 - 4 large-capacity collection containers with insert bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning ('Jet' cleaning) with time-controlled regulation for filter surface regeneration - PLC control system with display, for 4 slide valves EPN 24V DC, 4 machine start contacts and 1 start for external automatic switch-on (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - Extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-tested - Manufactured according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - GS-HM-03 'H3' test passed Bsdpfsx H Dahjx Agkswi - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Rated volume flow (Vnenn): 6,927 m³/h at 20 m/s - Max. volume flow (Vmax): 8,000 m³/h - Negative pressure at Vnenn: approx. 3,100 Pa - Negative pressure at Vmax: approx. 2,300 Pa - Collection volume: 495 liters - Sound pressure level: < 73 db(A) - Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Original price over €30,000 Availability: short-term Stock location: 63934 Röllbach

Year of construction: 2018, condition: used, For inquiries regarding the attachment, Mr. Herden (by phone) will be pleased to assist you. Westtech Woodcracker C250 / Tiltator / Collecting Grapple / Immediately available / Year of manufacture: 2018 / Excellent condition! Price: €21,890.00 net / €26,049.10 gross - Cutting diameter softwood (mm): 330 - Cutting diameter hardwood (mm): 280 - Grapple opening (mm): 930 - Shear opening (mm): 450 - Own weight (basic – fully equipped) (kg): 580-970 - Recommended oil flow rate (l/min): 50-100 - Recommended auxiliary flow (l/min): 35-50 - Recommended operating pressure (bar): 280 - Carrier vehicle operating weight * (t): 7-15 Equipment: - Includes endlessly rotatable tiltator - Includes collecting grapple - Includes Autospeed function - Integrated Multigrip We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse features a very large selection of various Westtech products, all immediately available! Mr. Herden (phone) will be happy to support you. Upon request, we will be pleased to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. Bwodsyltu Ropfx Agksi We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply you with the complete Westtech Woodcracker range! Subject to prior sale and errors excepted! Internal no.: 318367 = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile 2x chip bins á 190l Volume flow 2500 m³/h Bwodpfx Agjvz Uhyskji HxWxD: 2160 x 830 x 1900 mm

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 850 kg, compressed air connection: 6 bar, nominal flow rate: 5,060 m³/h, negative pressure: 2,700 Pa, nominal power: 7.5 kW (10.20 HP), Bin volume 3x165 l, jet-pulse cleaning. Housing is vacuum-tight and pressure surge resistant above 200 mbar, equipped with suction connection and non-return valve, antistatic and water- and oil-repellent filter elements with jet-pulse cleaning system. High-performance radial fan with three-phase motor of energy efficiency class IE3 is installed on the clean air side, featuring integrated exhaust silencing and air outlet grille. Unit is mounted on 2 swivel and 2 fixed castors. Includes 3 chip containers with discharge bags, a control system with CEE industrial connector, and integrated fire extinguishing system preconfigured for connection to local water supply (water connection 1/2", min. 0.5 bar). The control is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime addition are included. For automatic start-up, either current transformer coils or volt-free contacts from the machine can be used. Bwedpfx Agoyi Efcoksi

Year of construction: 2022, condition: used, For inquiries regarding this attachment, please contact Mr. Herden (via telephone). Westtech Woodcracker C450 Harvesting Grapple / incl. collection grapple / incl. rotator / incl. autospeed function / incl. power rotator / incl. OQ70/55 quick coupler adapter plate / incl. V90 electrical connector / incl. electrohydraulic switching / in stock & immediately available / Year of manufacture: 2022 / very good condition Price: €50,390.00 net / €59,964.10 gross - Cutting diameter softwood (mm): 500 - Cutting diameter hardwood (mm): 450 - Grapple opening (mm): 1,600 - Shear opening (mm): 800 - Own weight (basic – fully equipped) (kg): 1,760 – 2,350 - Recommended hydraulic flow main circuit (l/min): 80 – 160 - Recommended operating pressure (bar): 280 - Recommended hydraulic flow auxiliary circuit (l/min): 45–60 - Carrier vehicle operating weight (t): 20 – 25 Equipment: - incl. collection grapple - incl. autospeed function - incl. endless rotator - incl. power rotator - electrohydraulic switching between collection grapple and rotator - incl. OilQuick OQ70/55 adapter plate - incl. V90 electrical connector We also have a wide range of further adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a large selection of various products from Westtech that are available for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Magni telehandlers, OilQuick, Weber MT, Holp, DMS, Gierking GMT, Seppi M., Westtech, JCB construction equipment, Mercedes-Benz, and Iveco. Bwodpjyix N Iefx Agksi With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products for you! Subject to prior sale and errors! Internal No.: 522255 = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further details.

Year of construction: 2023, condition: used, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Westtech Woodcracker C450 Felling Grapple / incl. Accumulation Grapple / incl. Tiltator / incl. Autospeed Function / incl. Electrohydraulic Switching / immediately available / Year of manufacture: 2023 / DEMO unit / very good condition Price: €41,390.00 net / €49,254.10 gross Cutting diameter softwood (mm): 500 Cutting diameter hardwood (mm): 450 Grapple opening (mm): 1,600 Shear opening (mm): 800 Own weight (basic - full equipment) (kg): 1,760 – 2,350 Recommended main circuit flow rate (l/min): 80 – 160 Recommended operating pressure (bar): 280 Bwedpfx Agjyix Nzskoi Recommended secondary circuit flow rate (l/min): 45-60 Carrier vehicle operating weight (t): 20 – 25 Equipment: - Accumulation grapple - Autospeed function - Tiltator with endless rotation - Electrohydraulic switching between accumulation grapple and tiltator Option: MS21 adapter plate including bolts and installation = €2,400.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a large selection of different Westtech products in stock and ready for immediate delivery! Simply contact us at / . Upon request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner of Westtech. We are an official sales and service partner for Magni telehandlers. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Moreover, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker range! Subject to errors and prior sale! Internal No.: 523301 = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Bwsdpfx Agev T Db Tskoi Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Connection: 100 mm #8347

Condition: excellent (used), Year of construction: 1999, Höcker Polytechnik Clean Air Dust Extractor – Clean Air Unit Inlet nozzle: right Control cabinet Diameter of inlet nozzle: 300 mm Rated air flow: 5,320 m³/h Minimum air flow: 4,433 m³/h Filter area: 28 m² Filter cleaning: motorized shaking 3 collection bins, total capacity: 495 liters Bodsyb T Ucopfx Agkswi Filter material: polyester needle felt Negative pressure at Vmax: 2,700 Pa Design: mobile Overall length: 3,210 mm Motor power: 7.5 kW Electrical connection: approx. 400 Volt/50 Hz Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Bsdpsrt U Nuefx Agkswi Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 with dust filter is a compact, mobile professional dust extractor designed for efficient removal of chips, dust and sawdust in woodworking workshops. The fine dust filter ensures not only strong suction power but also increased filtration efficiency, improving air quality in the workplace. Main advantages of the machine Performance 1,000 m³/h – ideal for use with medium and small woodworking machines. Dust filter – effectively captures fine particles, including sanding dust. Motor 0.75 kW / 230 V – quiet, energy-efficient operation without the need for three-phase installation. Mobility – four castor wheels allow easy movement around the workshop. Compact design – takes up little space, ideal for small workshops. Design and technology The unit is equipped with a metal chip extraction fan ensuring long service life and reliability. The high-quality dust filter effectively separates fine particles from the air stream, reducing workshop dust levels. The solid, powder-coated housing protects internal components, while the sealed suction system prevents pressure loss. Precision and efficiency The CORMAK FM230 woodworking extractor provides stable and consistent suction. With an output of 1,000 m³/h and low power consumption, it efficiently serves a single woodworking machine without interruptions. The fine particle filter also makes it an excellent dust extractor for sanding applications. Applications Small and medium-sized joinery workshops Craft and production facilities Technical schools and training workshops Home and hobby workshops Bwedpfx Aoycuckjgkei The FM230 works perfectly with milling machines, planers, jointers, belt sanders and thicknessers. Standard equipment Dust filter Waste collection bag Castor wheels with brake Bag fastening clamp Optional equipment Extraction hose Ø100 mm Suction port reducers Additional set of filter bags Technical data Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Vacuum pressure 1,800 Pa Noise level 70 dB Bag capacity 60 L Number of bags 2 (filter + waste) Suction port diameter 100 mm Dimensions (H × W × L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: excellent (used), functionality: fully functional, feed hopper 5,5 cbm Bjdpfxelxyrle Agkewi main conveyor electric-hydraulic drive 30 kW double deck screen box 1.220 x 2.440 mm optional: incl. 2 wheelmobile stockpile conveyors each 500 mm x 8 m as stockpilers

Condition: new, Year of construction: 2026, CORMAK ZW400 Magnetic Chip Collector (420 mm) – Practical and Efficient Workshop Tool The CORMAK ZW400 magnetic chip collector with a length of 420 mm is a practical and convenient tool designed for collecting and removing metal chips generated during cutting, drilling, and other machining operations. It is ideal for both industrial applications and smaller, non-professional workshops. Simply move the magnetic rod over the metal chips to collect them, then position it above a container and pull back the plunger—the chips will automatically fall into the container. Key features and benefits: fast and effective chip collection without direct contact, practical hook for convenient storage, compact working length, Bwodpfoycfhdsx Agkoi solid and durable construction.

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Bwsdpfx Agovz Az Iskji Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x4, wheelbase: 3,440 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2022, Equipment: air conditioning, = Additional options and accessories = - Leaf spring suspension = Notes = Fuel tank: 275 ltr. Air conditioning Luxury seats Equipped with Usimeca / Hyva garbage collector: Type: Alpha Capacity: 19 m3 Pressure: 175 bar Semi automatic hydraulic compaction cycle operated by manual lever controls Sump tank (100 L) between the body and the tailgate Working hopper lamp night and reversing working buzzer Rear rotating beacon lamp protected Emergency stop Aluminum side protection Wire mesh cover of the lights Original rear springs changed by short and reinforced ones = Further information = Transmission: ZF16S1650, manual transmission Year of construction: 2022 Refen size: 295/80R22.5 Suspension: leaf suspension Front axle: Steered GVW: 31,000 kg = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings. Bwsdpovy E R Njfx Agksi WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings.

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Negative pressure approx. -27m/bar Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Bwsdpsygx Ekofx Agkei Motor 2.2 kW .

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Bwodeyg Exqspfx Agkoi Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Condition: used, Year of construction: 1993, Technical details: motor capacity: 7,5 kW revolution per minute: 2860 U/min extraction suction socket - diameter: 200 mm electrics - voltage/frequency: 380 V/Hz weight of the machine approx.: 235 kg dimension machine xH: 1,0x1,0x1,65 m Dust Suction Device - impeller Dm = 600x160mm Bwodpfxsu Nu Exe Agkei - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps dia = 140mm - 90 ° arc dia = 250x600mm - 1x spare belts 15x1500mm *

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 -Motor power: 4.6 kW -Speed: 2880 rpm Bwsdpfsfmd R Ujx Agksi -without: housing -Impeller outside: Ø 415 mm Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

Year of construction: 1988, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm Bedpfxocmuwqj Agkjwi -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm Bedped Tir Iefx Agkjwi -Weight: 412 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan Bodpsfdmg Sjfx Agkewi -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Condition: used, Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm Bjdpfx Aecuauyegkswi -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm Bsdpfxsc Ir Duj Agkewi -Connection output: 400 x 400 mm -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm -Weight: 222 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Bwjdpfxjt Rbhze Agkoi -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg