Used Baghouse Dust Collector for sale (5,092)

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Dcsdpfx Asvg U Dxji Son Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: used, Year of construction: 2022, Operational units. Multiple available. Ask for spec and quotation! Dsdpfxoyi Uzae Ai Sjcn

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Djdpferyxmxsx Ai Socn Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, Capacity 8,900 m³/h Motor power 7.5 kW (10 HP), 3,000 rpm Air velocity 32 m/s Filter dimensions Ø160 x 940 mm Number of filters 42 units Filtration area 21 m² Djdpfxjz I Scue Ai Secn Chip collection Big bag (1,250 liters) Inlet diameter Ø300 mm Dimensions 1,210 x 2,550 x 3,520 mm Weight 540 kg Operating temperature -20°C to 40°C

Condition: new, Year of construction: 2026, Airflow capacity 11,300 m³/h Motor power 11 kW (15 HP), 3000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 60 pcs Filtration area 30 m² Chip collection 2x 1250-liter big-bag (total: 2500 liters) Inlet diameter Ø355 mm Dedpfx Aijz I Sc Ue Socn Dimensions 1200 x 3310 x 3560 mm Weight 820 kg Operating temperature -20°C to 40°C

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Dcjdpfx Aiozdddyo Sjn Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Stock number: 1143

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Djdpfx Ajzq A Ezei Sscn Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 sawdust extractor with dust filters is a machine designed for intensive use in woodworking facilities. It combines a compact design, high performance, and an advanced filtration system that effectively removes chips, sawdust, and fine dust from workstations. Thanks to the use of third-stage dust filters, the extractor minimizes airborne dust, directly improving operator safety and working comfort. Main Advantages of the Machine Extraction capacity of 4560 m³/h – fast and effective removal of sawdust and chips from up to four machines simultaneously Dust filters – highly effective at trapping fine particles and reducing airborne dust in the work area Steel impeller – a balanced component ensuring vibration-free and quiet operation 3.8 kW three-phase motor – provides high power and stable suction pressure 6 bags with a total capacity of 600 l – extended operating time without the need for frequent emptying Connection to up to 4 workstations – maximum functionality for multi-stage operations Adjustable feet and a stable frame – precise leveling and safe operation on uneven surfaces Construction and Technology The CORMAK FM350 woodworking dust extractor is built on a reinforced, powder-coated steel frame. The filtration system consists of 3 dust filters and 3 waste bags, each with a capacity of 200 liters. The bags are secured using robust steel clamps, ensuring quick replacement and easy maintenance. The 300 mm diameter steel impeller provides smooth operation and ensures the durability of the machine, even under intensive working conditions. Precision and Performance The FM350 operates with an extraction capacity of 4560 m³/h, maintaining stable suction performance thanks to an impeller speed of 2950 rpm. Four suction connections (1 x 180 mm + 4 x 100 mm) allow several woodworking machines to be connected simultaneously, making the unit an ideal solution for serial production and service workshops. The dust filters effectively remove fine dust particles that are often not captured by conventional filter bags. This significantly improves air quality and reduces the risk of dust accumulation and clogging in machines. Applications The CORMAK FM350 chip extractor is recommended for use with: milling machines, planers and thickness planers, Dcedoz A Tv Ejpfx Ai Son band saws and panel saws, wide-belt and drum sanders. It is suitable for both production facilities and medium-sized woodworking workshops where effective dust extraction and occupational health and safety are priorities. Standard Equipment 3 dust filters 3 waste bags with a capacity of 200 l each Connection manifold: 1 x 180 mm / 4 x 100 mm Adjustable feet Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Parameter Specification Extraction capacity [m³/h] 4560 Bag volume [l] 3 x 200 Number of bags 6 (3 filter bags + 3 waste bags) Suction connection diameters [mm] 1 x 180, 4 x 100 Dimensions (L x W x H) [mm] 2355 x 590 x 2150 Weight [kg] 125 Motor power [kW] 3.8 Power supply 3-phase, 400 V Manual (DTR) yes CE Declaration Yes

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Dcedoz A Tl Topfx Ai Son Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Dcsdpfx Aisk Ea Uuo Son

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA sawdust extractor with dust filters is a highly efficient and robust dust extraction system designed for woodworking and carpentry facilities. Thanks to its increased filtration area and four fabric bags, this model effectively removes both wood chips and fine dust generated during intensive machine operation. The FM300SA woodworking dust extractor is an ideal solution for many hours of continuous operation in an industrial environment. Main Advantages of the Machine Extraction capacity of 3900 m³/h – effective removal of sawdust and dust even when working with several machines simultaneously 4 fabric bags – increased capacity and longer intervals between emptying High-efficiency dust filter – separates particles as small as 2 microns Metal, dynamically balanced impeller – vibration-free and quiet operation of the system 2.2 kW three-phase motor – ensures reliable and continuous operation in industrial conditions Stable steel construction – resistant to deformation and demanding operating conditions Mobility – four-wheel mobile base with a maneuvering handle Construction and Technology The FM300SA is equipped with a multi-stage filtration system based on filter bags and dust filters, ensuring a high level of air purification. The metal WhirlWind series impeller and efficient suction duct system guarantee stable airflow without pressure drops. The Y-shaped connection manifold (1 x 150 mm / 3 x 100 mm) allows several processing machines to be connected simultaneously. Precision and Performance Thanks to optimized duct aerodynamics and a large filtration surface, the CORMAK FM300SA sawdust extractor provides effective dust removal even during continuous operation. High-quality filtration reduces the amount of contaminants in the working environment, directly contributing to operator health and improving the precision of machine operation. Applications The FM300SA is designed for professional users who work with large quantities of sawdust and wood chips. It is ideally suited for: carpentry workshops and furniture manufacturing facilities, production lines equipped with multiple machines, dust extraction from sanders, planers, saws, milling machines, and thickness planers, areas requiring fine dust filtration (dust filters included). Standard Equipment metal mobile base with 4 wheels, 4 fabric bags (filtering and waste bags), 2 high-efficiency dust filters, extraction connection manifold (1 x 150 mm, 3 x 100 mm). Optional Equipment 100 mm extraction hose, galvanized clamp. Technical Specifications Parameter Specification Extraction capacity [m³/h] 3900 Negative pressure 1750 Pa Noise level 75 dB Bag volume [l] 220 Number of bags 4 Suction connection diameters [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1400 x 570 x 2250 Weight [kg] 64 Dcodpfxoz A Txys Ai Sen Motor power [kW] 2.2 Power supply 400 V / 3-phase Manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300S Dust Extractor with Dust Filters The CORMAK FM300S dust extractor with dust filters is a professional machine designed for the efficient removal of chips, sawdust, and fine dust generated during wood processing. Thanks to its dual filtration system, powerful three-phase motor, and well-designed construction, the FM300S woodworking dust extractor is an ideal solution for both medium-sized and larger production workshops. Main Advantages of the Machine Dcodpfx Aoz A T Hqei Ssn High extraction capacity – 3,900 m³/h – effective operation even with large amounts of contaminants Dust filters included – ensure efficient particle separation and cleaner air 2.2 kW three-phase motor – guarantees continuous and reliable operation Balanced metal impeller – reduces vibration and noise Mobile construction with 4 castor wheels – easy to move even in confined spaces Quick bag fastening system – convenient and fast maintenance 1 x 150 / 3 x 100 mm extraction outlets – enables simultaneous operation with several machines Construction and Technology The FM300S dust extractor is built on a stable steel frame, powder-coated for improved resistance to industrial conditions. The machine is equipped with a WhirlWind series metal impeller, which provides efficient suction while maintaining a low noise level. The large extraction outlet allows the machine to operate with up to three processing stations simultaneously, significantly increasing the productivity of the workshop. Precision and Operating Efficiency The advanced extraction system combines high negative pressure with efficient filtration of fine particles through integrated dust filters. As a result, the CORMAK FM300S sawdust extractor not only helps keep the work area clean but also contributes to operator health and the reliable operation of woodworking machinery. Applications The FM300S is designed for professional users who require continuous operation with saws, milling machines, planers, and other equipment generating significant amounts of sawdust and wood chips. The dust extractor is ideally suited for: woodworking workshops, furniture manufacturing plants, craft workshops, local dust extraction systems in production lines. Standard Equipment mobile metal base with castor wheels, 2 fabric waste collection bags, 2 dust filters (main filters), Y-shaped extraction connector. Optional Equipment 100 mm extraction hose, galvanized clamps, filter cartridges with filtration efficiency down to 2 microns. Technical Specifications Specification Value Extraction capacity [m³/h] 3,900 Negative pressure 1,750 Pa Noise level 75 dB Bag capacity [l] 150 Number of bags 2 (waste collection) Diameter of extraction outlets [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1,400 x 570 x 1,960 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM340 230V woodworking dust extractor with a dust filter is a high-performance extraction unit designed for woodworking shops and facilities that require effective removal of sawdust, wood chips and fine dust. Thanks to its single-phase operation and compact design, the unit is ideal as a mobile sawdust extractor for multiple workstations. Dcsdpez A Tkpefx Ai Sjn Main Advantages High extraction capacity – 3,200 m³/h – efficient handling of machines generating large amounts of waste material. 2-micron dust filter – effective air filtration, including fine dust particles. 300 mm diameter metal impeller – stable, vibration-free operation. 180° rotating extraction unit – flexible adaptation to the layout of the extraction hoses. Quick-release mounting system – convenient and fast replacement of filter and waste bags. Mobility – transport wheels and relatively low weight make it easy to reposition the extraction unit. Construction and Technology The FM340 230V is equipped with a robust metal fan enclosed in a durable housing, ensuring consistent negative pressure while maintaining stable extraction performance. The high-quality dust filter, with filtration efficiency down to 2 microns, allows the unit to be used even for sanding and processing dust-generating materials. The extraction unit can be rotated by 180°, making it easier to connect three workstations to the 3 × Ø100 mm outlets. Thanks to its 230 V power supply, the sawdust extractor can be connected in virtually any workshop without the need for a three-phase electrical installation. Precision and Operating Efficiency The 1.5 kW motor reaches a rotational speed of 2,850 rpm, resulting in highly effective collection of wood chips and fine dust particles. The large 190-litre collection bag allows for extended operation without the need for frequent emptying. Applications Woodworking: planers, jointers, thickness planers, saws and sanders Woodworking shops, furniture manufacturing facilities and craft workshops As a sawdust blower or dust extraction unit in smaller production lines Standard Equipment Waste collection bag Self-cleaning dust filter (2 microns) Suction inlet 1 × Ø150 mm / 3 × Ø100 mm Metal mobile base with wheels Optional Equipment Ø100 mm extraction hose Galvanized hose clamps Technical Data Motor 1.5 kW / 230 V Rotational speed 2,850 rpm Extraction capacity 3,200 m³/h Negative pressure 1,900 Pa Noise level 70 dB Bag capacity 190 L (500 mm / 1,100 mm) Outlet diameter Ø150 mm / 3 × Ø100 mm Impeller diameter 300 mm Dimensions (L × W × H) 985 × 560 × 2,210 mm Weight 45 kg

Condition: new, Year of construction: 2026, Airflow capacity 15,000 m³/h Motor power 18.5 kW (25 HP), 3,000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 117 units Filtration area 59 m² Chip collection 2x big bag (total: 2,500 liters) Inlet diameter Ø400 mm Dimensions 1,670 x 4,000 x 3,630 mm Weight 1,150 kg Dodpfx Asz I Sdlji Secn Operating temperature -20°C to 40°C

Condition: used, Year of construction: 2015, Manufacturer: Donaldson Model : TDP450 Year : 2015 Type : Dust collector Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Filter area: 20.6 m² (Fibra Web) / 42 m² (Ultra Web) Power : 3 kW Required pressure: 6 bar 2 new Ultra Web filters Cleaning filters using compressed air Dcjdpfx Aozz Thnei Sen Dimensions: 100 x 130 x 290 cm Weight : 350 kg

Condition: good (used), Year of construction: 2004, The used filter dust collector Infastaub MKR 4/20 - 4/20 RO or industrial cassette filter, is a high-performance filter system for efficient process air dedusting. Thanks to its two-stage configuration, the system is perfectly suited for critical and fine dusts – such as pharmaceutical dusts in the particle range of 1 to 10 µm. The integrated rotational cleaning (RO) ensures constantly low differential pressures and maximum service life in continuous industrial operation. Name: Cassette filter Manufacturer: Infastaub Type: MKR 4/20 - 4/20 RO Year built: 2004 -Max. volume flow: Up to 6,000 m³/h -Filter area: Total 160 m² (80 m² in the 1st stage + 80 m² in the 2nd stage) -Number of chambers: 4 chambers -Filter classes: Stage (cleanable): H13 (HEPA – 99.95% separation efficiency) Stage (safety stage): H13 to U15 (ULPA – up to 99.9995% separation efficiency) -Residual dust content: values down to < 0.001 mg/m³ -Max. operating temperature: +80 °C -Cleaning: pneumatic via compressed air pulse (approx. 6 bar compressed air pressure) -Dimensions (approx.): length 3,800 mm × width 1,150 mm × height 2,300 mm -Net weight: approx. 4 tons -Voltage: operating voltage 400V / 50Hz, control voltage 24V DC -Material: stainless steel Dsdpfxomzat Ho Ai Secn -Raw gas collecting duct ∅ D6: 315 mm, M6: 700 mm -Technical doc.: Yes -Accessories: Control -Condition: Used-good -Price: On demand

Condition: used, Year of construction: 2001, functionality: fully functional, filter area: 43 m², volume flow: 7,650 m³/h, negative pressure: 2,200 Pa, rotational speed (min.): 2,800 rpm, We are selling our bag filter, type Nestro NAsf5/3. The unit is available for dismantling and collection at our premises. Due to a new acquisition with integrated heat recovery, this unit is now surplus to our requirements. Dsdpfezt Ruvox Ai Sjcn

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 400V Dust Extractor with Dust Filter The CORMAK FM300 400V with a dust filter is a professional industrial-grade dust extractor designed for the efficient removal of contaminants generated during the processing of wood and wood-based materials. Thanks to its three-phase 400V power supply and a filter with a filtration accuracy of 2 microns, the machine meets the requirements of modern production facilities and woodworking workshops. Main Advantages of the Machine High extraction capacity – 2,800 m³/h – efficient extraction of sawdust, wood chips, and dust from various processing stations. 2-micron self-cleaning dust filter – effective separation of fine dust particles ensures cleaner air in the production hall. 1.5 kW three-phase motor – stable and continuous S1-duty operation, designed for intensive use. Dcedpfx Aijz A T Sts Sen Balanced metal impeller – guarantees quiet, vibration-free operation and a long service life. Compact and mobile design – the extractor takes up little space and can be easily moved thanks to its 4 castor wheels. Quick bag fastening system – allows efficient replacement of the plastic waste bag without unnecessary downtime. Construction and Technology The FM300 400V is a technologically advanced woodworking dust extractor equipped with a highly efficient metal fan. The impeller position and aerodynamic design of the suction channel provide strong negative pressure and high airflow capacity. The 2-micron dust filter enables precise separation of dust generated during sanding, milling, and cutting wood, functioning as a high-precision sawdust extractor. The filter features a self-cleaning design, minimizing the need for maintenance. Precision and Operating Efficiency The FM300 400V operates at a rotational speed of 2,850 rpm. Combined with an extraction capacity of 2,800 m³/h and stable suction pressure, this allows continuous operation even in heavily dust-laden environments. It is a reliable solution for users who require both cleanliness and high performance from a single machine. Applications Woodworking and furniture workshops Wood processing lines in small and medium-sized production facilities Extraction of chips and dust from saws, milling machines, sanders, thickness planers, and jointers Mobile sawdust fan for local dust extraction systems Standard Equipment 2-micron self-cleaning dust filter Y-shaped connector – 2 x Ø100 mm Metal mobile base with 4 wheels Plastic waste collection bag Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Specification Value Extraction capacity [m³/h] 2,800 Motor speed [rpm] 2,850 Bag capacity [l] 153 Number of bags 1 Diameter of extraction outlets [mm] 1 x 130, 2 x 100 Dimensions (L x W x H) [mm] 940 x 510 x 1,960 Weight [kg] 64 Motor power [kW] 1.5 Power supply 3-phase, 400 V User and Maintenance Manual (DTR) YES CE Declaration of Conformity Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 230V Dust Extractor with Dust Filter The CORMAK FM300 230V with a dust filter is a highly efficient and mobile dust extractor that combines powerful suction with a modern filtration system. Designed for workshop environments, it is suitable for both professional woodworking facilities and smaller workshops. The use of a 2-micron dust filter makes the machine suitable for applications where clean air is particularly important. Main Advantages of the Machine High extraction capacity – 2,800 m³/h – effective removal of chips, sawdust, and dust from one or two machines simultaneously. 2-micron self-cleaning dust filter – ensures clean air in the workshop and effective retention of fine particles. Stable metal construction – resistant to vibration and mechanical damage. Balanced steel impeller – ensures quiet and vibration-free operation. Compact dimensions and mobility – an ideal solution for workshops with limited space. Quick bag mounting system – convenient and fast replacement of the plastic waste collection bag. Construction and Technology The FM300 230V is equipped with a balanced metal sawdust fan that generates high negative pressure and enables stable operation for many hours. The robust frame made of steel profiles and the solid mobile base ensure structural rigidity and reduce vibration. The suction system is fitted with a Y-shaped connector (2 x Ø100 mm), allowing two machines to be connected simultaneously. The 2-micron dust filter is self-cleaning, which significantly extends its service life and improves filtration efficiency. It is an ideal choice for applications where, in addition to extracting larger waste particles, it is also important to remove fine dust generated during milling and sanding. Precision and Operating Efficiency Operating at a speed of 2,850 rpm, the FM300 230V provides highly effective removal of contaminants, contributing to cleanliness and safety in the working area. Thanks to its 1.5 kW motor and efficient turbine, the extractor maintains consistent suction power even during intensive use. Applications Small and medium-sized woodworking facilities Furniture and model-making workshops Woodworking – saws, jointers, and planers Milling, sanding, and drilling workstations Standard Equipment Metal Y-shaped connector – 2 x 100 mm Metal base with 4 castor wheels Plastic waste collection bag 2-micron self-cleaning dust filter Optional Equipment Ø100 mm extraction hose Dsdpsz A T T Dofx Ai Sjcn Galvanized clamps Technical Specifications Specification Value Extraction capacity [m³/h] 2,800 Negative pressure 1,800 Pa Noise level 70 dB Motor speed [rpm] 2,850 Bag capacity [litres] 153 Number of bags 1 Diameter of extraction outlets [mm] 1 x 130, 2 x 100 Dimensions (L x W x H) [mm] 940 x 510 x 1,960 Weight [kg] 64 Motor power [kW] 1.5 Power supply 1-phase, 230 V User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Dsdpov Azfzofx Ai Secn

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Heavy-duty steel construction designed to withstand vibration and intensive industrial use Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Dodevzqtxopfx Ai Secn Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230L1 Dust Extractor with Dust Filter The CORMAK FM230L1 with a dust filter is a modern, mobile dust extractor that combines high operating efficiency with a compact design. The use of a horizontal impeller and an advanced filtration system allows the machine not only to effectively remove sawdust and wood chips from woodworking machinery, but also to vacuum production hall floors. The machine has been designed for professional woodworking facilities as well as hobby workshops. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ensures efficient removal of wood chips and sawdust from a single workstation. Balanced WhirlWind metal impeller – quiet, stable operation and increased durability. Dust filter and plastic waste collection bag – effective separation of contaminants and cleaner air in the workshop. High negative pressure and horizontal suction system – efficient extraction of even fine dust and particles. Production hall vacuuming capability – the included wide floor nozzle expands the functionality of the machine. Compact dimensions – takes up little space in the workshop. Large wheels and ergonomic handle – easy transportation in various working conditions. Construction and Technology The heart of the FM230L1 woodworking dust extractor is a multi-blade WhirlWind series impeller mounted horizontally in a metal housing. It provides even suction pressure and smoother operation compared to standard vertical designs. The reinforced motor operates in continuous S1 duty mode, ensuring reliability even during intensive use. Additional structural supports eliminate vibration and ensure a long service life of the suction system. Precision and Operating Efficiency The FM230L1 operates at a rotational speed of 2,800 rpm, allowing efficient extraction of sawdust, wood chips, and fine dust generated by woodworking and sanding machines. The filtration system removes airborne contaminants, reducing the need for frequent cleaning and improving operator comfort. The set includes a large floor nozzle, making the machine a practical sawdust vacuum cleaner as well. Applications Craft woodworking shops and furniture manufacturing facilities Educational and school workshops Sanders, saws, milling machines, and jointers Cleaning production halls and production lines Standard Equipment Dust filter Plastic waste collection bag Floor nozzle Metal fastening clamps Lockable, bearing-mounted castor wheels Optional Equipment Ø100 mm extraction hose Galvanized clamp Additional filter bag set Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Extraction capacity 1,150 m³/h Negative pressure 1,020 Pa Noise level 65 dB Bag capacity 90 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg The FM230L1 with dust filter is a compact and reliable woodworking dust extractor designed for everyday work with wood and wood-based materials. Choose quality, stability, and industrial-grade filtration – order today and improve working conditions in your facility! Dcodpfx Aoz A Ur Uei Sen

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Dedjw T U Uzjpfx Ai Secn Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200P Sawdust Extraction System – Reliable and Compact Workshop Dust Collector The CORMAK DC2200P sawdust extraction system is a robust and compact woodworking dust collector designed for intensive operation with milling machines, saws, and planers. Thanks to its compact design and high suction performance, it is an excellent choice for small and medium-sized woodworking workshops requiring a reliable sawdust extraction fan. Main Advantages of the Machine Extraction capacity of 2200 m³/h – effective removal of chips and dust even during intensive operation. 2.2 kW / 400 V motor – reliable three-phase power supply with high torque performance. Compact design – saves workshop space while maintaining strong suction power. Stable and durable metal housing – resistant to mechanical damage and industrial working conditions. Mobile base – easy movement of the unit thanks to the integrated wheel system. Design and Technology The DC2200P is equipped with a balanced metal rotor mounted in a durable steel housing, ensuring smooth and vibration-free operation. The quick-release bag and filter mounting system allows for fast replacement, while the sealed construction ensures effective retention of contaminants within the extraction system. The 125 mm inlet diameter enables connection to standard dust extraction systems. Precision and Work Efficiency The reliable CORMAK DC2200P dust collector provides a consistent airflow, effectively removing dust and sawdust without the risk of backflow. The unit delivers high performance while maintaining a low noise level, improving operator comfort during daily use. Applications The CORMAK DC2200P is suitable for: Woodworking workshops – extracting chips from milling machines, planers, and table saws. Wood processing plants – dust and chip extraction from individual workstations. Training and technical workshops – a safe and efficient solution for maintaining a clean working environment. Hobbyists and craftsmen – a compact sawdust collector for demanding users. Standard Equipment Fabric filter bag Waste collection bag Mobile base with four wheels Optional Equipment Ø125 mm extraction hose Quick-mount hose clamps Technical Specifications Dodjvuzt Nepfx Ai Sscn Parameter Value Extraction capacity 2200 m³/h Bag diameter 500 mm Inlet diameter 125 mm Motor power 2.2 kW Power supply 400 V / 3 phase Dimensions 1160 × 605 × 750 mm Weight 50 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM470 Dust Collector is a high-performance industrial sawdust extraction system designed for large woodworking workshops and industrial production facilities. Equipped with a robust construction and a multi-fan extraction system, it delivers maximum efficiency and reliability in demanding working conditions. Key Features Impressive airflow capacity of 6,800 m³/h – provides efficient extraction of sawdust and wood chips from multiple workstations simultaneously. 5.6 kW motor – three-phase 400 V power supply ensures stable and reliable continuous operation. Balanced metal impeller – guarantees smooth, quiet, and vibration-free performance. Large collection capacity with 8 × 200 L bags – reduces emptying frequency and enables uninterrupted operation. Heavy-duty steel construction – powder-coated housing provides excellent resistance to mechanical damage and corrosion. Construction and Technology The CORMAK FM470 woodworking dust collector is equipped with a durable steel fan featuring a precisely balanced impeller, ensuring stable airflow and long service life. The housing is manufactured from thick steel profiles, protecting the unit against mechanical damage and demanding workshop conditions. The bag mounting system with clamps and fastening rings allows quick installation and replacement of large fabric filter bags. The design also provides easy access for maintenance and servicing. Precision and Performance The high efficiency of the FM470 dust extraction system results from optimized fan geometry and a large filtration surface area provided by the collection bags. Stable airflow ensures effective removal of dust and chips, improving machine performance, workplace cleanliness, and operator comfort. Applications The FM470 is ideal for: Industrial woodworking and furniture manufacturing plants – extraction of chips from routers, planers, saws, and thickness planers. Factories and production halls requiring clean air and high-capacity dust extraction. Technical schools and educational workshops – providing a safer working environment. Mobile and central dust extraction systems – serving as a powerful industrial sawdust collector. Standard Equipment 8 fabric filter bags (200 L each) Bag mounting system (clamps and fastening rings) Optional Equipment Ø100 mm extraction hose Galvanized hose clamp Technical Specifications Specification Value Extraction capacity 6,800 m³/h Collection bag capacity 8 × 200 L Number of bags 8 Extraction inlet 1 × Ø180 mm, 4 × Ø100 mm Overall dimensions (L × W × H) 3,560 × 580 × 2,200 mm Weight 152 kg Dedpfjvu Ryrsx Ai Sscn Motor power 5.6 kW Power supply 3-phase, 400 V