Used Dust Extraction for sale (26,783)

Condition: new, Year of construction: 2024, -Filtering Capacity: 4000 m³/h - 5500 m³/h - 8000 m³/h -Unit Dimensions: 1500x1150x2220-1730x1300x2220-1730x1300x2220 -Filter Water Capacity: 210 LT-260 LT-260 LT -Motor Power: 4-5.5 / 7.5 -Electric Supply:400v, 3P N 50Hz - 400v, 3P N 50Hz - 400v, 3P N 50Hz Rrurcqvr -Filter Permeability: 02 micron -Filter Surface Area: 0,14 m² - 0,17 m² - 0,23 m²

Condition: used, mobile dust extractor, manufacturer: DUSTCONTROL, type: 5500 Uag808Vqvd

Year of construction: 2020, Condition: new, Used suction unit Year of construction 2020 not dust-tested For milling, planing and sawdust High-quality, stable chassis for easy maneuvering Double-woven fine filter bag For milling, planing and sawdust (not suitable for dust) Extraction unit can be rotated through 180° to allow extraction from below or above C90Seji Sturdy metal fan wheel High-quality chassis as standard for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Double-woven fine filter bag Scope of delivery: Two filter bags, two chip bags Nominal volume flow2800 m³/h Negative pressure max.1900 Pa Filter area2 x 1.92 m² Chip collection volume2 x 120 l Nominal width external suction nozzle inlet203 mm Nominal width external extraction connection outlet1 x 100, 2 x 120 mm Idle speed2950 min¯¹ PU1 Dimensions and weights Length approx.1500 mm Width/depth approx.500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Input power2.2 kW Supply voltage400 V Mains frequency50 Hz Noise emission Sound pressure level max.87.5 dB(A) Availability: short term Storage location: Röllbach

Year of construction: 1996, Condition: used, Dust extraction filter, filtering system,dust extraction W.A.M. / GASUS Centralized dust extraction, dust extraction system, cartridge filter, impulse filter, silo filter Type FRC.J MC.4.2 year of construction 1996 volume flow max. 1780 m³/h filter area approx. 12 m² (8 pieces with 1,5 m² each) Bekequk2T3W exhaust connection at filter inlet Ø 100 mm Exhaust connection at filter outlet 160 x 110 mm Compressed air connection approx. 6 bar motor power 1,5 kW Mains connection 400 Volt, 50 Hz. - without complete filter control - pneumatic filter cleaning, control at filter housing,230 Volt,50 Hz. - 8 pieces used filter cartridges Ø 140 mm, length 920 mm - maintenance flap 200 x 90 mm - radial fan on top of the filter unit, type MC.4.2 - Filter bottom part with rotary flap lock - Operating instructions Space requirement L x W x H 1100 x 1100 x 2820 mm weight 170 kg good condition

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Rippert, radial fan type 00/78/14- ex -Motor: Loher 4.6 kW 2915 rpm Ex protected -Total pressure: 1200 Pa -Volume flow: 8400 m³/h -Impeller: Ø 330 x 170 mm -Connection input: Ø 320 mm -Connection output: 500 x 280 mm -Dimensions: 930/800/H770mm -Weight: 126 kg Rwzjohurhx

Condition: used, Extraction installation ModestaCapacity +/- 15,000m&sup3 /h Extractor fan 18.5 kW Connection diameter 500mm Transport fan 7.5kW Electric knocking system (vibrator) Bijsrpfpwy Filter bags Filter bags 72 pieces Filter length 1950mm Filter diameter 200mm There is no door for filter items. Transport dimensions: 3450x1850x3300mm (LxWxH), + 2x pallet Weight +/- 2000kg

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Negative pressure approx. -27m/bar Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW . Dpnu9J

Condition: used, mobile dust extractor DELFIN DIG 100 type ASDG100EXPC, year of manufacture: 2010, no.: 101038736, connected loads: 400 V / 11 A / 7.5 kW Uahie9Njyh

Condition: new, Year of construction: 2024, The manufacturer guarantees the quality of purification. Dpoyz2 A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of SCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with SCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions 3250x1100x3700 Net weight 710 kg

Condition: used, Year of construction: 2022, 2022 Coima Group Dust Extraction & Biomass Burner System Serial IM_210459 / 076-22 incl: Galvanised Ducting & Flexible Twin Wall Connections, Coima Group Model: FMNA150000100009 CE 15 Kw Hogger Serial No: 077-22, Inclined Galvanised Feed Auger & Filter Box, Cylindrical Feed Vessel with Pumps, 2018 P&C / Coima Group Model:K300E CE Biomass Burner Serial No 842018, Vertical Cylindrical Galvanised Silo, Prodeco Model V-E70ECO EC Briquette Former. Internal Metal Ducting.Serial No: 790 RAAMS REQUIRED T9Yxnt7Vmj

Condition: used, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan J90Slbp0 -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Year of construction: 2007, Condition: good (used), Filter area: 31 m², Suction capacity: 2,500 m³/h, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum filter for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Absolent type TSF4F dust filter is based on the latest and most efficient filter technology. Air is drawn into the filter cartridges, while most of the remaining particles stick to the outside of the cartridges. The cleaned air passes through a fan to the HEPA filter, with a guaranteed and consistent collection efficiency of 99.99%, trapping 0.3 µm. diameter particles. The HEPA filter has a pressure gauge that shows when the cartridge should be replaced. When the pressure drop across the filter cartridges exceeds a preset limit, the valves in the cleaning air tank open and a pulse of compressed air is released into the filter cartridges from the cleaning nozzles. Brand name: Absolent Model: TSF4F Parameters : 4 kw fan. Capacity 2500 m3/h Sound level (operation/cleaning): 60/85 dB(A) Filtration area of 31 m2 Bucxryylyo Hepa filter area : 24 m2

Condition: new, Year of construction: 2024, The extractor has a time switch for automatic filter shaking, allowing for any setting of the work cycle! Our technology department has placed great emphasis on creating a motor shaking system, in which the entire filter cleaning cycle takes place automatically in a closed system. A safety lock prevents larger elements from entering the fan. Built-in, soundproof, RETURN OF WARM AIR Cpvly0Bnnu Reinforced construction with special anti-corrosion coating Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors have an additional pair of doors for easier bag replacement Durable, massive construction guaranteeing quiet and vibration-free operation of the dust collector the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season A strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors A failure-free filter shaking system with the possibility of working in an automatic cycle A mobile system mobile, facilitating trouble-free movement of the extractors throughout the plant Waste containers designed to maintain 99.99% airtightness of the system, at the same time they have been equipped with a mobile mobile system Control cabinet for switching the device on/off polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 18.5 kW (25 HP) Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 920 mm Number of filters 117 pieces Inlet diameter 400 mm Outlet dimensions 595 x 345 mm x2 Efficiency 15000 m3/h Dimensions (width x length x height) 1500 x 3830 x 2410 mm (without upper elbow) Weight 980 kg

Condition: used, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system Dppfjr -Manufacturer: Keller, dry separator type Vario 2 -Power: 6.6 kW / 2850 rpm -Individual components/technical data: see photos -Dimensions: 1915/1100/H3260 mm -Weight: 1180 kg

Condition: new, Year of construction: 2024, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Cpu9Vmi3Zs Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Engine: Tilmann 0.09 kW 2800 rpm -Connection: input Ø 50 mm -Connection: output Ø 50 mm -Dimensions: 330/325/H300mm -Weight: 6.5 kg Cfohwwt2Ve

Condition: new, Year of construction: 2024, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED Dpoyiv 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h Dphzov -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: new, Year of construction: 2024, Thanks to the many years of experience of our CORMAK team, DCV series extractors in the TC Viber version have been created. Designing a new technological line has allowed us to create high-class extractors Advantages has an additional pair of doors for easier bag replacement DCV 6500TC extractor is another milestone in the production of efficient sawdust and dust extractors whose aim is to constantly provide the same extraction parameters during the entire work cycle. the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Failure-free filter shaking system with the possibility of working in an automatic cycle The new patented security system on the market guarantees failure-free operation of the device, durable, massive construction guaranteeing quiet and vibration-free operation of the extractor takes up little space and yet can extract large amounts of dust and chips > strong and quiet fan guaranteeing high vacuum efficiency! failure-free operation confirmed by production plants dealing with large orders every day they have a special blade design, making them more efficient and effective, and also contributing to energy savings very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 6500 extractors quick replacement of waste containers designed in such a way as to maintain 99.99% airtightness of the system, metal waste containers with a mobile driving system facilitating trouble-free movement. Also equipped with a peephole to help check the level of filling of the containers low noise and high efficiency are ensured by a balanced metal rotor and an improved engine ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. Control cabinet for switching the device on / off We guarantee high quality of cleaning !!! polyester filter stops dust up to 5 microns in diameter, to filter smaller particles, use a filter such as HEPA It is forbidden to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw material, e.g. wet sawdust) Before starting the extractor, dismantle the lower beam to have free access to the containers for shavings POLISH PRODUCTION Technical parameters Dpoyd9 CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION EFFICIENCY 6500 m3/h SUCTION PORT DIAMETER 280 mm SPEED SUCTION 28-32 m/s FILTER SURFACE 16 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 32 WASTE CONTAINER CAPACITY 500 L DIMENSIONS 2440 x 930 x 2270 mm WEIGHT 440 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan B03Dtkjvgq -Dust extraction fan: Radial fan type DN 160 -Motor: Dietz 1.0 kW 2850 rpm -Volume flow: 30 m³/min / 1800 m³/h -Connection: inlet Ø 140 mm -Connection: Output 135 x 135 mm -Dimensions: 470/300/H365 mm -Weight: 17.7 kg

Condition: new, Year of construction: 2024, The radial turbine is located in the vacuum cabin on the clean air side in special sound-absorbing cabins. The new-generation reinforced turbine and the large filter field operate more efficiently and effectively and contribute to energy savings. Advantages the DCV 6500 extraction unit is a further milestone in the manufacture of efficient sawdust and dust extraction units that consistently provide the same extraction performance throughout the entire extraction cycle. robust solid construction ensures quiet and vibration-free operation of the extractor trouble-free operation confirmed by production facilities dealing with large volumes of orders on a daily basis space-saving yet capable of extracting large quantities of dust and chips metal suction nozzle with a large diameter of 285 mm provides excellent air flow powerful and quiet fan for high vacuum performance! has a special blade design, making it more powerful and efficient and saving electricity very high tightness of the entire intake system, guaranteeing the best quality of the air inside the plant and, during the heating period, no loss of heat large filter surface area possibility to build a ceiling system and feed several machines working simultaneously with the DCV 6500 ECO extraction units quick exchange of waste film bags designed to keep the system 99.99% airtight, low noise and high efficiency is provided by a balanced metal impeller ensures perfection and cleanliness at the work station, which directly translates into the quality of your products perfectly compatible with machines such as: grinding machines, veneering machines, panel saws, etc. We guarantee high quality cleaning !!! the polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA It is forbidden to use this extraction device in explosive atmosphere The extraction is used to work in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Dpoydb Technical parameters CONTINUOUS DUTY MOTOR POWER S1 5,5 kW / 400 V, 50 Hz RPM 2900 rpm SUCTION OUTPUT 6500 m3/h SUCTION NOZZLE DIAMETER 285 mm SUCTION VELOCITY 28-32 m/s FILTER SURFACE AREA 16 m2 FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 32 DIMENSIONS 2441 x 940 x 2270 mm WEIGHT 260 kg

Condition: used, Year of construction: 1998, Centrifugal fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan centrifugal fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h Bk7Lh7Dtb99 -Connection: input Ø 305 mm -Connection: output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Condition: new, Year of construction: 2024, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY Dpoxtn 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Condition: new, Year of construction: 2024, Reliability confirmed by our customers dealing with large orders every day. Pollutants from the filter fall directly into an airtight bag with quick discharge. Designed for the filtration of primarily chips and dust with very fine granulation in the woodworking and furniture industry. Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large orders on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels metal intake nozzle with a diameter of 200 mm allows for a much higher air flow!!! possibility to build a ceiling system and feed several machines working simultaneously with the DCV ECO extraction units large filter surface area! have a special blade design, which makes them more efficient and effective, as well as contributing to energy savings very high tightness of the entire extraction system, guaranteeing the best quality of air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 4500 ECO is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA Technical parameters CONTINUOUS DUTY MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM Cprkkjkasg 2900 rpm SUCTION OUTPUT 4500 m3/h SUCTION NOZZLE DIAMETER 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 micron NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Condition: new, Year of construction: 2024, The extraction units of the DCV series were developed with the customer in mind and designed for the filtration of primarily very fine chips and dust in the woodworking and furniture industry. This extraction model offers unbeatable value for money! Advantages of Cleaning quality guaranteed! space-saving yet capable of extracting large quantities of dust and chips trouble-free operation confirmed by production facilities dealing with large quantities on a daily basis Robust, vibration-free hardened construction for maintenance-free operation! dynamically balanced metal rotor to reduce noise levels possibility to connect 3 machines at the same time! large filter surface area! special blade design to make them more effective and efficient and save electricity very high tightness of the entire intake system, guaranteeing the best quality of the air inside the plant and, during the heating period, no loss of heat quick change of film containers designed to keep the system 99.99% airtight. The DCV 3600 ECO is the next step in the production of efficient sawdust extraction, with the aim of constantly ensuring the same extraction performance throughout the entire extraction cycle. This type of extraction will ensure perfection and cleanliness at the workplace, which will have a direct effect on the quality of your products. Dpoxkb Perfectly compatible with the following machines: sanding machines, format saws, veneering machines, panel saws, etc. It is forbidden to use this extraction in explosive atmospheres The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet material such as wet sawdust) polyester filter retains dust with a diameter of up to 5 microns, for the filtration of smaller particles it is necessary to use a filter such as HEPA We offer machine tools with real CE EU DTR - certified by the best in the EU. By choosing the CORMAK brand, you are choosing precision machining and long life, peace of mind and safety for yourself or your employees. We do not look for external companies, we have our own service ( warranty/guarantee services/training/launching/machine demonstrations ) at our CORMAK head office Technical parameters Capacity 3600 m³/h Supply voltage 400 V Motor power S1/S6 2.2/3.0 kW Motor speed 3000 rpm Intake velocity 28-32 m/s Filter type Polyester Filter dimensions Ø160 x 980 mm (9 pcs.) Dimensions of waste bags Ø500 x 1000 (2 pcs.) Outlet spigots 3 x Ø120 mm / 1 x Ø200 mm Dimensions (W x L x H) 580 x 1600 x 2200 mm Weight 89 kg