Used Bale Shredder for sale (1,467)

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) Godpfxsd E R D Ss Ah Hjbg - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Year of construction: 2016, Compressed air | Krone Comprima 150 CV XC Year of manufacture: 2016 Approx. 27,500 bales pressed All chains replaced in 2023 Gbedox R N R Hspfx Ah Hsg Wrapping table Control unit Complete knife set Roller hold-down Air brake | Internal No.: 11349362

Condition: good (used), Year of construction: 1997, Slow-speed shredder with moving floor Gedox Ed Ruepfx Ah Hsbg Rotor width: 800 mm Motor: 11 kW

Condition: refurbished (used), Year of construction: 2008, operating hours: 8,200 h, overall weight: 46,000 kg, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Godpfoxb Et Aox Ah Hebg Machine is overhauled and immediately available.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overworked machine 37 kW Gbodpfx Ahetxykfj Hog Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Second row of knives

Condition: new, Attachment suited for: Agricultural machines Gedox Tc H Hspfx Ah Hebg

Condition: used, Year of construction: 2008, operating hours: 54,000 h, functionality: unexamined, Lindner Jupiter 3200 slow-speed single-shaft pre-shredder including hydraulic unit and control cabinet Gbjdpfxox R S Sgs Ah Hjg Operating hours: 54,000 bh Machine has been regularly maintained and overhauled Application: Shredding of commercial and industrial waste,

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Gbjdpfx Asxn Nameh Heg Year: 2025 New / Ready for Operation We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.

Condition: good (used), Year of construction: 1998, Slow-speed unit with hydraulic moving floor Rotor width: 1000 mm – ideal for pallets Rotor diameter: 300 mm with 24 knives installed Gbedsx Dq Abopfx Ah Heg Motor: 22 kW With discharge auger Screen perforation: 25 mm

Condition: refurbished (used), Year of construction: 2008, operating hours: 3,119 h, overall weight: 25,000 kg, Doppstadt DH 910 Panther - Year of manufacture: 2008 - Engine: Mercedes Benz Gbsdpfxsw N Nwve Ah Hjg - Operating hours: 3119 - Remote control - Weight: 25,000 kg The machine is fully overhauled and immediately available.

Condition: new, Shredder Shafts for Metal and Car Bodies fitted in Hammel 950, Arjes 950, Lindner U95, Olnova95 all types availlable WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. "MADE IN GERMANY" We manufacture exclusively in Germany using the finest materials. We impress with our high level of workmanship and quality. Delivery time by arrangement WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness. Gedjfg Adlepfx Ah Hobg

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 2,800 kg, Cellulose/Bale Clamp Load centre: 750 ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Gsdjx Rabvjpfx Ah Hsbg Description: Year 2011 ISO 3A (51 cm) Capacity 2,800 kg Sideshift Opening range 625-2,380 mm Width 1,450 mm Clamps 1,500 mm ID OS1802

Condition: reconditioned (used), Year of construction: 2016, M&J / Metso 6000-12 Preshredder (Mint Condition) Gedpfx Ahjx Satuo Hjbg 2 × 200 kW HDC with new P30 hydraulic pumps Installed in 20 ft container Complete with oil cooler Cutting table 6000-12 knives Complete with bearings and renovated hydraulic motors. Ready for immediate delivery – excellent condition, barely used. Perfect solution for high-performance shredding and heavy-duty applications. Contact us today for price and availability.

Condition: used, Year of construction: 2013, operating hours: 15,314 h, functionality: fully functional, machine/vehicle number: 5280, overall weight: 13,500 kg, power: 132 kW (179.47 HP), type of input current: three-phase, rotational speed (min.): 105 rpm, For sale: LINDNER MICROMAT 2000 from 2013 in good working condition, 132 kW. Gbjdpfxsx Tfnas Ah Hog

Condition: excellent (used), Year of construction: 2006, power: 18.5 kW (25.15 HP), Slow-running unit with moving floor Gjdex R Uhqjpfx Ah Hjbg 15 kW motor Only 300 operating hours

Condition: used, Year of construction: 2018, operating hours: 5,130 h, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F Year of manufacture: 2018 Operating hours: 5,130 Engine: Mercedes MTU 490 HP 42 teeth AdBlue Tracked undercarriage Remote control Gbedjx N Ugkjpfx Ah Heg Overband magnet Weight: 30,000 kg Track shoes The machine has been overhauled and is immediately available.

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Circuit Breaker: 125A Weight: approx. 3200 kg Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Number of Blades: 10 rotating, 4 stationary Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. The machine price is €25,000 net, excluding shipping and installation. Gjdpfxjw Sv Rze Ah Hebg Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!

Condition: new, functionality: fully functional, total width: 2,400 mm, total length: 1,10,000 mm, total height: 2,850 mm, rotational speed (max.): 2,100 rpm, overall weight: 20,000 kg, power: 209.62 kW (285.00 HP), transport length: 10,500 mm, transport width: 240 mm, transport height: 395 mm, Equipment: rotational speed infinitely variable, WERT PHANTOM mobile shredder on crawler chassis for various applications - wood - waste - tires - glass - paper Gsdotty Hhspfx Ah Hjbg - Building rubble - Light scrap Tooling according to customer requirements Equipment: Power: 205 KW - 285 HP Caterpillar C7.1. stage 5 Transmission: 2x 125,000 NM Optionally synchronous or asynchronous shaft rotation Hydraulics: Linde Belt width: 1000mm Discharge height: 3300 mm Magnet: Optional Spiral fan: standard Radio : standard Water spraying: standard Weight: 20 tons Dimensions L/W/H : 11x2,4x2,85m

Condition: ready for operation (used), Grinder, Shredder, Moditec G3 ACPS, Used machine Manufacturer : Moditec Type : G3 ACPS Overall dimensions : 1480 x 485 x 1570 mm Weight : 340 kg Year : 2002 Electrical data : 400 V ; 2.2 kW Feeding hopper : 500 x 350 mm Gbjdpfxjx Da Exo Ah Heg

Condition: used, Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, Year of Manufacture 1999 Technical Specifications: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of Manufacture: 1999 Operating Hours: 50,702 Pressing Force: 94 t Total Connected Load: 128 kW Filling Opening: 1020 x 1750 mm Bale Dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Godpfx Ahsx I D N Sj Hsbg Bale Weight: 525 to 800 kg Transport Dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine Weight: approx. 28,000 kg Materials: Paper, cardboard, lightweight waste, plastic waste Notes: The baler is currently still in operation. Dismantling is scheduled for January 2026. Inspection under operating conditions is possible. The conveyor belt shown in the images is not included in the scope of delivery. Please note: All technical data are based on the manufacturer’s information. We accept no liability for the stated information or for possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m Gbsdpfxox N Ugdo Ah Hog - Overband magnet - Hydraulic drive (self-propelled) - Central lubrication Machine is overhauled and immediately available.

Condition: new, fitted in Hammel VB650/750 Lindner U75 Arjes VZ750 Shredder Shafts ( NEW ) in set MADE IN GERMANY all types availlable Gsdofgl Najpfx Ah Hebg WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: refurbished (used), Year of construction: 2014, operating hours: 7,275 h, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue Gbsdpfxexb Et Ns Ah Hog - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: refurbished (used), Year of construction: 2009, Stationary single-shaft shredder Doppstadt DW2560E 1 Buffalo - Year of construction 2009 - Electric motor 315kW - Central lubrication - Control cabinet Gedpfxsxmvpfe Ah Hjbg - remote control - Weight 26500Kg Machine is completely overhauled

Condition: refurbished (used), Year of construction: 2006, operating hours: 6,421 h, Doppstadt DW 3060 Büffel - Year of manufacture: 2006 - Operating hours: 6,421 - Engine: Mercedes Benz, 430 hp - 21 teeth - Remote control - Central lubrication system - Hydraulic drive (self-propelled) - Weight: 25,000 kg Machine has been overhauled and is immediately available. Gedox Rtz Aspfx Ah Hjbg