Used Bale Shredder for sale (1,450)

Condition: excellent (used), Catalogue number 7262 Gkedpform Ii Dex Aabjc TECHNICAL DATA - Upper loading hopper inlet: 780x620mm - Lower loading hopper inlet: 650x620mm - Output for shredded wood: Ø160mm - Rotor working width: 600mm - Rotor diameter: 248mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 30 pcs - Knife dimensions: 30x30mm - Screen: 20x20mm - Hydraulic pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight: 1200kg ADVANTAGES – Made in Germany – Original DTR documentation – Not repainted – Auto-reverse – Hydraulic pressing drawer – Very good condition – Used chipper Original photos Net price: 38,900 PLN Net price: 9,150 EUR depending on the 4.25 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Gkedsu Thabjpfx Aabsc Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Gksdpfxou D S Tio Aabsc Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: ready for operation (used), Year of construction: 2011, LINDNER JUPITER 1800 - 200 kW with frequency inverter - ready to work - with electrical cabinets Gsdpfxsxfrrgs Aabjkc

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, overall weight: 1,250 kg, rotor length: 550 mm, power: 18.5 kW (25.15 HP), We are offering our test unit with one shaft shredder and snail conveyor for discharging the material. Gkjdpowy Nh Rofx Aabsc

Condition: good (used), Year of construction: 1978, Selling out sawmill factory! Chipper with opening 650 x 160 mm. With infeed rollers Motor 75 kw In set 2 screens: 40 x 40 mm - chips 10 x 10 mm - saw dust New knives in set. Gksdpsphpq Tefx Aabec Very good condition, checked.

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Infeed width: 540 mm - Infeed height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs Godpfx Ajwu Rcroabekc - Sieve dimensions: 40x40 mm - Lower toothed feed roller - Lower roller motor: 4 kW - Upper toothed feed roller - Upper roller motor: 4 kW - Belt feeder - Feed belt length: 4720 mm - Feed belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German manufacture – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,447 EUR depending on the exchange rate 4.25 EUR (Prices may change with major exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: Gsdpju Tha Iefx Aabskc The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 4 pieces Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredders were an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machines are in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1998, operating hours: 3,075 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Rotor width: approx. 800 mm Rotor speed: 135 rpm Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg The machine is installed under a joinery line and has only processed clean wood Last maintenance: 12/2024 Gkedpswv Enfjfx Aaboc Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Condition: repair required (used), - Shredder Lindner Komet 1750 - one motor with 160 kW - Without electrical cabinet and hydraulics. - With all manuals. Electric and hydraulic diagrams. Gsdexfrp Eepfx Aabskc

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, empty load weight: 2,000 kg, input voltage: 400 V, input frequency: 50 Hz, EPS shredder with the following components: Styrofoam pre-shredder KSTAS Styrofoam fine mill KH3 Finished product system TW200FPA Industrial silo for EPS storage Blower Pipe system The new price of the machine in 2023 was approximately €90,000. MACHINE DETAILS Electrical specifications Power: 8 kW Gksdpsxly Eujfx Aabec Voltage: 400 V Frequency: 50 Hz Rated current: 16 A Dimensions & weight Dimensions (L×W×H): 4.00 × 2.00 × 3.50 m Net weight: 2,000 kg

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 12,000 h, machine/vehicle number: 07-442-4016, The machine consists of a cutting chamber featuring two rotating shafts equipped with circular saws with multiple teeth and various thicknesses, depending on the material to be processed. The material is fed via a conveyor installed on the grinding unit. Each of the two shafts is driven by an independent electro-hydraulic transmission. The main control and command panel is connected to the water system, whose pumps supply water motors with axial pistons mounted on the machine frame. Machine operation is managed through a control panel located on the electrical cabinet. Typically, the machine is mounted on a metal pedestal, which should be designed according to the user’s specific installation requirements. Godpfxoxc H T He Aabjkc

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - loading hopper dimensions length/width 900x630mm - rotor working width 540mm - engine 7.5kW - sieve diameter 20mm - knife dimensions 40x40mm - number of knives 15pcs Gkodpoiwtd Rsfx Aabec - auto reverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008kg ADVANTAGES - German production - unpainted - very good condition - used chipper Net price: PLN 37900 Net price: EUR 8920 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors. Gkodpfx Aou Tg I Djabec

Condition: excellent (used), Catalog number 7712 TECHNICAL DATA - Inlet dimensions: 4800x150 mm - Shaft width: 560 mm - Shaft diameter: 350 mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse - Sieve diameter: 12 mm - Upper conveyor belt - Lower conveyor belt - Feed conveyor length: 1300 mm - Infeed table length before conveyor: 1000 mm - Main motor: 22 kW - Feed motor: 0.75 kW, 1.5 kW Gkjdpow H Ad Sofx Aabsc - Dimensions (L/W/H): 3670/1200/1400 mm - Weight: 1900 kg ADVANTAGES – German-made – Autoreverse – Conveyor belts above and below – Very good condition – Used shredder Net price: 55,900 PLN Net price: 13,150 EUR depending on 4.25 exchange rate (Prices may change with greater fluctuations)

Condition: used, Technical data for the bale loosening drum: Manufacturer not known Type of bale loosening drum Year of manufacture not known Dimensions of the drum 6000 x 3000 mm (l x d) Height of the welded-in helix 300 mm Dimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H) Drive power 2 x 4 kW Gsdsu Thx Repfx Aabskc Functional description: The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing. Scope of delivery: Bale loosening drum Frame with drive and roller bearings for the bale loosening drum Comments: Documentation (operating instructions, CE declaration, electrical/hydrical circuit diagram) is not available and cannot be supplied. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Catalog number 7268 TECHNICAL DATA - top loading hopper dimensions L/W 1000x600mm - bottom loading hopper dimensions L/W 650x600mm - rotor width 570mm - 15kW engine - 16x12mm sieve - knife dimensions 40x70mm - number of knives 18pcs - auto reverse - pressure drawer - 0.75kW pump engine - dimensions L/W/H 1900x1450x1450mm - weight 1040kg ADVANTAGES – German production – unpainted – very good condition – used chipper Original photos Gedpfx Aorm Nibjabokc Movie of the machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 35900 PLN Net price: 8440 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - inlet width 550mm - inlet height 220mm - shaft width 630mm - knife length 630mm Gsdpfxjwa Am Hj Aabskc - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor approx. 1.5kW - toothed pulling shaft from the top - upper shaft motor approx. 1.5kW - vibrating chute - vibrating chute length 4750mm - vibrating chute width 450mm - main motor 45kW - vibrating chute motor 1.5kW - auto reverse - reverse gear - total machine dimensions L/W/H 3200x1700x1400mm - total machine dimensions length/width/height 4750x800x1100mm - weight about 4500kg ADVANTAGES - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 120,900 Net price: EUR 28,440 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7191 TECHNICAL DATA Gjdpoudv Nfefx Aabokc - loading hopper inlet: 870 x 735 mm - rotor working width: 720 mm - main motor: 18.5 kW - pump motor approx. 0.75 kW - number of knives: 17 pcs - knife dimensions: 80 x 40 mm - screen: 20 mm - pressure drawer - electric auto-reverse - outlet for shredded wood: Ø 250 mm - dimensions (L/W/H): 2000 x 1350 x 1370 mm - weight: 1586 kg ADVANTAGES – pressure drawer – very good condition – used shredder Net price: 38,900 PLN Net price: 9,160 EUR at a rate of 4.25 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Inlet of loading hopper: 1200x1000 mm - Outlet for shredded wood: Ø160 mm - Working width of rotor: 980 mm - Main motor: 18.5 kW - Number of knives: 24 pcs - Knife dimensions: 30x30 mm - Screen: 20 mm - Pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850 mm - Weight: approx. 2,500 kg ADVANTAGES – German manufacture – Auto-reverse Godpfxjwrpv Ej Aabjkc – Pressure drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,210 EUR at 4.25 EUR exchange rate (Prices may change with larger fluctuations)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA inlet width 900mm inlet height 300mm shaft width 1030mm shaft diameter 700mm knife length 1030mm number of knives 3pcs sieve dimensions 70x70mm from the bottom 2 toothed pulling shafts lower shaft motor 7.5kW from the top 2 toothed pulling shafts upper shaft motor 7.5kW belt feeder redler with chain belt 5600mm + 10600mm 2.2kW feeder belt width 800mm main motor 90kW reverse gear total dimensions of the machine L/W/H 3300x3100x1700mm dimension of base for chipper 3300x2080x1940mm dimension of feeder/redler length/width/height 5600x900x1000mm + 10600x1050x1600mm dimension of base for feeder belt 5100x1300x2520mm total weight approx. 16000kg Gsdjwi Sm Uepfx Aabjkc ADVANTAGES – German production – chain conveyor type redler, equipped with scrapers – reverse gear – DTR documentation – used chipper, very good condition Net price: PLN 269900 Net price: EUR 63490 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number 7293 TECHNICAL DATA - Loading hopper dimensions at the top (L/W): 1200x1520 mm - Loading hopper dimensions at the bottom (L/W): 1000x1520 mm - Outlet for shredded wood + screw conveyor - Working width of rotor: 1500 mm - Main motor: 45 kW - Pump motor: approx. 1.5 kW - Number of knives: 41 pcs - Knife size: 40x40 mm Gedpfx Aaer Hmxdjbjkc - Screen: 15 mm x 20 mm - Pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 2450x2460x1720 mm - Weight: approx. 3000 kg ADVANTAGES – German-made – very good condition – used wood chipper Original photos Net price: 155,900 PLN Net price: 36,682 EUR at an exchange rate of 4.25 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7615 Technical data: - inlet width 550mm - inlet height 200mm - shaft width 570mm - knife length 570mm - number of knives 2pcs - sieve dimensions 60x120mm - toothed pulling shaft, divided from the bottom Gkedowa Al Njpfx Aabec - lower shaft motor 2.5kW - toothed pulling shaft from the top - upper shaft motor 2.5kW - vibrating chute 2.2kW - vibrating chute length 3200mm - vibrating chute width 490mm - main motor 45kW - auto reverse - reverse gear - exhaust port diameter 250mm - overall machine dimensions length/width/height 2100x2000x1100mm - total dimensions of the vibrating chute length/width/height 3200x700x600mm - weight about 3500kg ADVANTAGES - wide inlet opening - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 119,900 Net price: EUR 28,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - Inlet width: 440mm - Inlet height: 300mm Godpfx Aajwu Rgdjbjkc - Shaft width: 480mm - Shaft diameter: 440mm - Number of knives: 2 pcs - Screen size: 50x50mm - Toothed feed shaft from above and below - Shaft motor: 0.78/1.1kW - Electric autoreverse (adjustable) - With conveyor belt - Infeed belt length: 4006mm - Infeed belt width: 380mm - Belt feed forwards/backwards - Main motor: 30kW - Dimensions (L/W/H): 6100x1100x1100mm - Weight approx. 2000kg ADVANTAGES – German-made – With belt feeder – Autoreverse – Used chipper, in very good condition Net price: 76,900 PLN Net price: 18,090 EUR based on 4.25 EUR rate (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7595 Technical specifications: - Feed hopper inlet 1400x1400mm - Discharge for shredded wood Ø160mm - Rotor working width 600mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives: 14 pcs - Knife size 40x40mm - V-Rotor - Screen 10mm - Pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg Gkjdpfxov R E Amo Aaboc ADVANTAGES – German manufacture – V-Rotor – DTR documentation – Pressing drawer – Auto-reverse – Used chipper, very good condition Net price: 39,900 PLN Net price: 9,388 EUR depending on the rate 4.25 EUR (Prices may change in case of significant fluctuations)