Used Baler Horizontal for sale (6,566)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Hedsx Dnb Uepfx Akrjl Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Hsdpfoxd D Nzex Akrsl

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Hjdpfjywpcpox Akrel Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Hedpfxjyf Hlio Akrsl Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Hodpfx Akoyr Numjrel Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 Hodpfx Akeu N Aykjrjl price: €1,850.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm Hsdpfx Akju N Argerjl year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle Hodpfx Aeu U Ii Eskrjl

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 Hedpfx Aju N Axgjkrel contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm Hsdpfxsu N Aqcj Akrel year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 3,00,03,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Horizontal stainless steel tanks – 2 units. Manhole at the front Hsdpfewnn Apsx Akrol 2.5" outlet at the end. AISI 304.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Hedpfxexqfwts Akrjl

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Weight: 16 t Hedpoxtmzxsfx Akrol The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Hjdpfx Aksibh S Hjrsl

Condition: good (used), Protech Horizontal Collator Model: HC2010 Hjdpfx Asv T D Duokrjl Plastic belt, belt width: 250 mm Distance between dividers: 200 mm, divider height: 150 mm Clearance: 140 mm x 150 mm Total dimensions: 2900 mm x 560 mm x 1540 mm.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 354, total length: 2,150 mm, total height: 1,600 mm, total width: 850 mm, controller manufacturer: Siemens, Equipment: CE marking, MACHINE DETAILS Control manufacturer: Siemens Control type: CNC Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 2,150 x 850 x 1,600 mm Transport weight: 800 kg Transport packages: 1 Hjdpfey Avuvox Akrel EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,101 h, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Shopmill 3 D Formingstar, spindle speed (max.): 12,000 rpm, coolant tank capacity: 900 l, The machine is in very good used condition with no outstanding maintenance required! TECHNICAL DETAILS Travel distance in long-operation X-axis: 1,800 mm Travel distance swivel table X-axis: 1,020 mm Travel distance rotary table X-axis: 675 mm Travel distance in pendulum operation: 675/675 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 600 mm Spindle speed: 12,000 rpm Swivel range: +10° to -100° × ±360° Feed rates X/Y/Z: 40 m/min Rotary-swivel table Rotary table size: Ø 620 × 500 mm Interference circle diameter: Ø 700 mm T-slots: 18 mm T-slot spacing: 100 mm Number of T-slots: 5 Reference keyway: 18H8 Centering bore: 30H7 × 10 mm Swivel range: +10° to -90° × ±360° Swivel speed 90°: 1.2 s Swivel accuracy: < ±10″ Rotary speed: 0–30 rpm Indexing accuracy: < ±6″ Axial runout: 0.015/Ø 300 mm Hjdpfx Ajy A Rzdekrjl Table load capacity: max. 375 kg Fixed machine table Clamping surface: 1,120 x 750 mm Max. tool weight: 10 kg Max. tool length: 330 mm Max. tool diameter: 80 mm (100 mm with adjacent pockets free) Chip-to-chip time approx.: 7.5 - 12 sec. Tool stations: 30 MACHINE DETAILS Internal coolant supply (IKZ): 40 bar Coolant tank capacity: 900 liters Tool holder: SK40 Control: Siemens 840D Shopmill 3D Formingstar Standby magazine Total positions: 190 Levels: 6 Tool length A: max. 240 mm Capacity A: 100 pcs Tool length B: max. 330 mm Capacity B: 90* pcs Tool change time: approx. 17–22 s Space required: 1,780 × 1,760 mm Height: 2,810 mm Weight: approx. 950 kg Spindle hours: 24,101 h Power-on hours: 62,438 h EQUIPMENT 3D touch probe Rotary-swivel table

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, table load: 500 kg, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 750 mm Distance spindle nose to table surface: 50 - 750 mm Distance spindle nose to table center: 150 - 900 mm Pallet dimensions: 500 mm x 500 mm Table load capacity: 500 kg Pallet clamping surface: 24 x M16 x D 2.0 Table indexing angle: 1° Spindle speed: 14,000 rpm Spindle taper: ISO 40 Max. spindle torque (25% duty cycle): 220.5 Nm Rapid traverse (X, Y, Z): 60 m/min Working feed rate: 30,000 mm/min Tool holder type: MAS403 BT40 Magazine capacity: 120 tools Max. tool length: 400 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1 sec Tool change time (chip-to-chip): 3.5 sec Hjdjy Edarjpfx Akrel Number of pallets: 7 Type: Rotary shuttle Pallet change time: 7.5 sec Pallet rotation at loading station: 90° MACHINE DETAILS Spindle motor (30 min rating): 18.5 / 22 kW Axis motors (X, Y, Z, B): 7.0 / 7.0 / 7.0 / 2.7 kW Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,700 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT High-pressure through-spindle coolant 35 bar Chip extraction Operating manuals CE Declaration

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, controller model: Fanuc Oi-MC, KAFO HMC 630 HMC Category: HORIZONTAL MACHINING CENTERS (HMC) Reference No.: 400234 Capacity: 630 X 630 MM Year of Construction: 2008 Technical Specification: Hedpfoy D E Syox Akrol SPINDLE Spindle Taper : CAT 50 WORKING CAPACITY Pallet Size : 630 x 630 mm Travels (XYZ) : X1050 x Y800 x Z880 mm B-Axis : 0.001° Distance from spindle nose to table center : 150 - 1030 mm Distance from spindle center to pallet surface : 100 - 900 mm Table Load Capacity : 1200 kg Max. Work Size : Ø1050 mm ATC Tool Change Capacity : 40 Maximum Tool Weight : 20 Kg CNC Control : Fanuc Oi-MC

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle Hsdpfx Aey H Ncbokrol - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: ready for operation (used), Year of construction: 2018, Horizontal Machine Center DMG MORI NH 5000DCG/40 Year 2018 Hjdpfxeyt Iubs Akrol Tavel X 730 Y 760 Z850mm Fully C axis 0.001 degree MAPPS FAUNC Spindle 14,000rpm 37/22KW at 303Nm HSK-A63 Taper 60 ATC Pallet 500 x 500mm

Condition: new, neu ca. 4 Monate ab Auftragse Türkei Hodpfx Aeynnhqokrol 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 54900 € 1037.61 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 440 mm, quadrat 440 rund 430 mm, quadrat 430 rund 320 mm, quadrat 260 807,5 mm 1.1 kW 4 kW 0.12 kW 2850 mm 2350 mm 2000 mm 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment Hodpfx Aksynnhdorsl coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 22700 € 435.84 € Doppelsäulenführung 4800x34x1,1 mm 20-100 m/min 380 mm 380 mm 430x380 mm 590 mm 0.55 kW 3 kW 0.12 kW 2900 mm 950 mm 1660 mm 1342 kg blade brush control panel Hodpfjynng Tex Akrol hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 72800 € 1375.92 € Doppelsäulenführung 9500x54x1,6 mm 20-100 m/min 1020 mm 1020 mm 1020x1020 mm rund 675 mm, quadrat 675 535 mm 2.2 kW 7.5 kW 0.12 kW 4500 mm 1700 mm 2750 mm 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades Hodpfx Aoynng Hekrol