Used Horizontal Boring Mill for sale (17,271)

Condition: used, total height: 2,450 mm, total length: 4,000 mm, total width: 2,000 mm, Empty weight: 6.300 kg Price: On request Dcsdowr Drhspfx Agked - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.0 - Number of axes [pcs.]: 3 - Spindle diameter [mm]: 75 - Table length [mm]: 1000 - Table width [mm: 800 - X-axis travel [mm]: 800 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 100 - Drilling capacity [mm]: 600 - Tool holder: ISO40 - Min. spindle speed [rpm]: 12.5 - Max. spindle speed [rpm]: 1000 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 4000mm x 2000mm x 2450mm (l x w x h) - Transport weight [kg]: 6300kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,550 mm, total length: 4,800 mm, total width: 2,740 mm, Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 Dsdpfxeymlz Ej Agkjcd - Spindle diameter [mm]: 80 - Table length [mm]: 1140 - Table width [mm: 970 - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 1500 - Z-axis travel [mm]: 1100 - Min. spindle speed [rpm]: 12 - Max. spindle speed [rpm]: 1000 - Options: Digital readout - └ Type of digital readout: Heidenhein - Transport dimensions: 4800mm x 2740mm x 2550mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dedsx T Ddyepfx Agkjcd

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Dsdpfou Dahnjx Agkocd Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1110013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle diameter: 110 mm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,500 mm Drilling spindle diameter: 110 mm Clamping surface of the table: 1,250 x 1,600 mm Table load capacity: 6,000 kg MACHINE DETAILS Control: Heidenhain TNC 426M Note: The tools shown in the images are not part of the sale or included in the scope of delivery. Dcodpjylwrtjfx Agkod

Condition: used, Year of construction: 2007, x-travel 200 mm y-travel 200 mm z-travel 400 mm Control Siemens 840 D Dcodpfx Agjyrh Aveked total power requirement 84 kW weight of the machine ca. 13 t

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light Dedpfjw Uab Nox Agkecd • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 4758.02 € 18 mm MK 2 240 mm 30 - 3000 U/min M12 355 mm Dcjdpoynm Aaefx Agkod 705 mm 1065 mm 170 kg 100 mm 155 - 415 mm 155 - 550 mm 340 x 280 mm 82 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43) - FLOTT tap holder B16 (list price €191.57) - Taper mandrel DIN 238 MK2/B16 (list price €26.18) - Taper mandrel DIN 238 MK2/B18 (list price €26.18) - Felix 2.0 - 100 mm (list price €428.36) YOU SAVE: 842,62 € Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Dcsdpfx Ajynmz Negkjd OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, Year of construction: 2005, x-axis 4000 mm y-axis 2500 mm z-axis 1600 mm w-axis 800 mm Control Heidenhain iTNC 530 table-size 1800 x 2200 mm table load capacity 20 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dcodpfx Aeyrt Azjgkjd Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm Dcodpeyrrt Ejfx Agked y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: used, Year of construction: 2019, FPS 420 M-NC Universal Milling and Drilling Machine Condition: Used Year of Manufacture: 2019 Features Travel distances X/Y/Z: 420 mm / 350 mm / 400 mm Milling head additionally movable on Y-axis: 150 mm Angle table surface / clamping area: 630 x 400 mm Dodpfeyrgp Uox Agkocd Permissible load: 300 kg Working Spindle Vertical and horizontal Vertical spindle extendable as drilling spindle, approx. 80 mm with clamping/travel Milling head manually swivellable: +/- 90° Tool holder: ISO 40 DIN 69871 with hydraulic tool clamping Main drive: three-phase brake motor Power: 7.0 kW Torque: 340 Nm Speed via: 2 gearbox stages, 0 to 4500 rpm Rapid traverse: 5000 mm/min Handwheel revolution: 2.5 mm Power connection: 3 x 400 VAC 50 Hz 25 A Weight: approx. 1,900 kg Dimensions (LxWxH): 2235 x 1875 x 2000 mm

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping Dcsdpexcgtgsfx Agkod - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: excellent (used), Spindle diameter: 100mm Spindle taper: ISO50 Table: 1120x1000 Table load: 3t Dcsdsyn Au Eepfx Agkod

Condition: used, Year of construction: 1983, Machine with digital readout. Including tool holders. Axe X: 1150mm Axe Y: 1000mm Axe Z: 600mm spindle diameter 100 mm table surface area 1000 x 1120 mm Dsdpfx Aoymalfjgkjcd tool taper 50 SK turning speed range 4 - 1250 min-1 spindle stroke 630 mm main drive 20 kW feed range 1 - 4000 mm rapid travel range 4000 mm workpiece weight max. 3000 kg total power requirement 40 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,9 x 3,6 x 3,3 m

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm INCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026) - VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8) - FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43) - FLOTT tap holder B16 (list price €191.57) - Taper mandrel DIN 238 MK2/B16 (list price €26.18) - Taper mandrel DIN 238 MK2/B18 (list price €26.18) - Felix 2.0 - 100 mm (list price €428.36) YOU SAVE: 842,62 € Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Dcodpfx Agexcbhrskjd Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: like new (used), Year of construction: 2014, Parts shown by hand not come. X1050 mm Y 870 mm Z 970 mm Complette tehnical documentation come with machine. Dedpfx Aoh Ryvbjgkocd

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Dodpfx Ajyqwxdsgkecd Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Weight: 26,000 kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, table load: 4,200 kg, total height: 900 mm, total length: 5,000 mm, total width: 1,150 mm, table length: 5,000 mm, table width: 1,150 mm, workpiece weight (max.): 4,200 kg, T-channels table for: - welding - table boring machines - clamping plates Cast Iron T-Slot Floor Plate Heavy Duty Machine Tool Table Boring Mill Clamping Table T-Slot Clamping Plate 5m Dimensions 5000 x 1150 x 900 mm Dsdpfoyn I N Ijx Agkscd Weight 4200 kg

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Dcsdpfx Ajym Nfuogksd Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Dcodoym Ndwjpfx Agksd Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Dcjdoym Nbpjpfx Agkod Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Dodpfx Ajq Ui Hqegkscd Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: refurbished (used), CNC Heidenahin or Sinumerik Dedsr Hdqxopfx Agkocd Travel distance X-axis: up to 1,800mm Travel distance Y axis: up to 1,600mm Travel distance Z-axis: up to 1,250mm Table load: up to 5,000kg Spindle diameter: 105mm Spindle speed (max.): 3,300 rpm Table length: 1,400mm Table width: 1,600mm Travel distance W-axis: 630mm Optional: Automatic Tool Changer.....40 pos Coolant through spindle.....20 bar Splash guard around rotary table Chip Conveyor Oil cooling unit (chiller) Touch probe

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg Dcedewdta Eepfx Agkjd quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation