Used Ball Rotation Apparatus for sale (9,860)

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), empty load weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Knodpfx Aovtpq Hoanef Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, machine/vehicle number: 10463, The AR series are low-speed rotors. They are available with 2, 4, 6 or 8 worm shafts. The machines are designed so that each screw unit is independent and mounted separately in the chassis. Screw shredders are designed for shredding friable materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to interfering materials such as glass, iron parts, stones, etc. The AR series is ideally suited for use as a bale breaker for e.g. PET bottle bales. Kedpfxsghgips Aanenf

Year of construction: 2024, condition: new, Machine works well with various fruit, berry and vegetable juice and pulp. During the work process, the juice enters the machine through the spinning filtration sieve. This way excess pulp and sediments stay in the sieve and filtered juice enters the juice collection tank. The sieve spins continuously so juice can flow without interruptions. Output: 1000 L/h. Knedsizbawopfx Aanef Conical form of the filter facilitates the work process so the pulp is collected and removed easily. The washing of the filter is rarely needed because of convenient conical filter form. That is why washing can be done once per day. Rotational juice filter has an integrated juice collection tank which collects the juice. Juice collection tank has an automatic pump and liquid level control. When the tank is full, the pump automatically turns on and transfers the juice for further processing. Machine is made entirely from stainless steel. Rotational juice filter is mounted on wheels. Machine is especially simple to use and easy to maintain. This filter is often used after our DESTONE destoning & pulping machine to remove the pulp from the berries or other fruits and achieve uniform quality juice or puree.

Condition: used, empty load weight: 3,400 kg, maximum load weight: 15,300 kg, overall weight: 18,700 kg, axle configuration: 2 axles, first registration: 02/2006, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, loading space volume: 9 m³, total length: 3,000 mm, tire size: 385/65 22,5, tire condition: 60 %, color: red, Year of construction: 2006, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40205 Goldhofer, Ballast • Year of manufacture: 2006 • ABS, Anti-lock Braking System • Air connection coupling heads (red + yellow) • Electrical connectors: 2 x 7-pin plugs • Gross weight: 18,700 kg • Unladen weight: 3,400 kg • Payload capacity: 15,300 kg • Permissible total weight: 18,700 kg • Tyre condition, axle 1: 50% – 50% — Tyre size: 385/65 R22.5 • Tyre condition, axle 2: 60% – 80% — Tyre size: 385/65 R22.5 • Tyre sizes: 385/65 R22.5 • Internal dimensions: L = 3,000 mm, W = 2,500 mm, H = 1,300 mm • Internal volume*: 10 m³ Kjdsxatwgepfx Aansnf • Pallet spaces: • Goldhofer • TX2-15/80 Disclaimer: Specifications subject to change; intermediate sale and errors excepted. More photos and videos available on our website. Our comprehensive service portfolio includes, for example: • Purchase / sale / rental of commercial vehicles • Fast, straightforward financing • Assistance with all (export) documentation • Ordering of export / customs number plates • Vehicle preparation: new tarpaulins, branding, painting, etc. • Professional loading / load securing • TÜV approvals, registration service • Transfer / delivery of commercial vehicles Consult our trained professionals — we are pleased to advise you.

Condition: new, maximum load weight: 61,050 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment list available upon request. Loading Platform: * Loading platform with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technically rated at 12,000 kg each * 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169K – manufacturer of our choice TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to process and display this data Brake System: * Wabco brake system as per EU regulations with EBS-E (4S/3M) without connecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations * Lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically blasted after welding using a shot-blasting machine * Second blasting with corundum for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint finish not possible Including the following accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection rail * Storage for approx. 1,000 mm long insertable stanchions in the rear central beam * At the gooseneck and rear plate, left and right, one bracket each for warning signs including socket * Remote steering from front and rear via cable remote control with push-buttons, with single-track monitoring of the axles (no installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stanchion pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading status * 7 pairs of galvanized insertable stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stanchion pocket strips mounted on the loading platform for stanchions approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading platform, for 1x10' * 1 shunting coupling with reinforcement bolted to the rear crossmember * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 Knjdpfx Asw Tpr Ueanjf

Condition: used, Year of construction: 2002, Operating terminal / Knjdeufxr Eepfx Aansf

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Knedpfx Aaovn Tg Ionof Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2013, condition: ready for operation (used), 2x Hugo Beck rotary feeder TA 4415 with underframe Hugo Beck electrically height-adjustable on request. Knedpfx Aast Rlq Tjnsf

Condition: excellent (used), axle configuration: > 3 axles, first registration: 11/2010, Year of construction: 2010, Rear axle 1: Lift axle; Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle 2: Lift axle; Tire profile left: 70%; Tire profile right: 70% Rear axle 3: Tire profile left: 70%; Tire profile right: 70% Rear axle 4: Steered; Tire profile left: 70%; Tire profile right: 70% Rear axle 5: Lift axle; Steered; Tire profile left: 70%; Tire profile right: 70% Technical condition: very good Visual condition: very good Contact John de Koning for more information. Kedpfx Aaow I T Szonjnf

Condition: used, empty load weight: 3,160 kg, maximum load weight: 14,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2001, tire size: 385/55 22,5, tire condition: 60 %, color: black, Year of construction: 2001, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40207 Hueffermann, HTA1800 * Year of manufacture: 2001 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Air connection coupling head (red & yellow) * 15-pin connection plug * Lifting and lowering device * Heavy-duty lashing eyes * Gross vehicle weight: 18,000 kg Knjdpfx Aexatwtoanef * Unladen weight: 3,160 kg * Payload: 14,840 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60% -- 60% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 60% -- 60% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Manufacturer: Hüffermann Disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Handling all (export) documentation * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained professionals—we will be happy to advise you.

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) Knedpewx Dbpjfx Aanjf - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: used, Year of construction: 2023, Tandem axle Air brake PTO shaft 20-piece / Varioterminal 9-inch bale chute / / Knsdpfxjtlrnae Aanof

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Stainless steel drum in high grade 316 stainless steel Ksdpoif Upfsfx Aanjnf Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Year of construction: 2006, condition: ready for operation (used), Hugo Beck rotary feeder TA 4415 with underframe Hugo Beck electrically height-adjustable on request. Knjdpfxjt Rlq Hs Aansf

Condition: used, empty load weight: 3,460 kg, maximum load weight: 14,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2008, tire size: 385/55 22,5, tire condition: 40 %, color: black, Year of construction: 2008, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40208 Knsdjxatwyspfx Aansf Hueffermann, HTA1800 * Year of manufacture: 2008 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Duomatic air connection * 15-pin connector plug * Lift and lowering device * Gross weight: 18,000 kg * Unladen weight: 3,460 kg * Payload: 14,540 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 40% -- 40% - Tire size: 385/55 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 Disclaimer: Specifications subject to change, prior sale, and errors excepted. Further photos and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Arranging all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TüV inspections, registration service * Transfer / delivery of commercial vehicles Consult our trained specialist staff — we will be happy to advise you.

Condition: used, empty load weight: 7,800 kg, maximum load weight: 42,200 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/1995, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 1,750 mm, loading space volume: 35 m³, total length: 8,000 mm, suspension: steel, color: yellow, Year of construction: 1995, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 401991 Goldhofer, TN-L6-50/80 * Year of manufacture: 1995 * ABS (Anti-lock Braking System) * Self-tracking steering axle * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Leaf spring * Gross vehicle weight: 50,000 kg * Unladen weight: 7,800 kg * Payload capacity: 42,200 kg * Permissible total weight: 50,000 kg * Axle manufacturer: BPW * Internal dimensions: L=8,000 mm, W=2,500 mm, H=1,750 mm * Internal volume*: 35 m³ * Pallet spaces: 20 * Goldhofer 5-40/62 2+3 * Platform height: approx. 1,170 mm * Tyre condition all round approx. 40% * Drawbar 50 mm Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Knodpfow U Nkgsx Aanef More photos and videos are available on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Processing of all (export) documentation * Ordering of export licence plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer/transport of commercial vehicles Please contact our trained staff—we will be happy to advise you.

Condition: used, empty load weight: 9,500 kg, maximum load weight: 50,500 kg, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 08/1996, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 1,130 mm, loading space volume: 26 m³, total length: 9,300 mm, suspension: air, color: yellow, Year of construction: 1996, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 402001 Goldhofer, TN-L6-50/80 * Year of manufacture: 1996 * ABS (Anti-lock Braking System) * Air suspension * Self-tracking steering axle * Air connection coupling head (red/yellow) * 2x 7-pin electrical connector * 15-pin electrical connector * Lifting and lowering device * Heavy-duty lashing eyes * Suspension: Air * Gross vehicle weight: 60,000 kg Knjdpfow U Nkmox Aanof * Unladen weight: 9,500 kg * Payload: 50,500 kg * Permissible gross weight: 60,000 kg * Axle manufacturer: BPW * Internal dimensions: L = 9,300 mm, W = 2,550 mm, H = 1,130 mm * Internal volume*: 27 m² * Pallet spaces: 23 * Heavy-duty trailer * Platform height: approx. 1,130 mm * Axles 5 + 6 with self-tracking steering * Tires approx. 60% tread remaining all round * 50 mm towing eye Disclaimer: Subject to prior sale, changes, and errors excepted. More photos and videos available on our website. Our extensive services include, for example: * Purchase, sale, and rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documents * Ordering of export/transit license plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transfer of commercial vehicles Please contact our trained team – we are happy to advise you.

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Spray head, lifting lugs Design: vertical Remarks: Minor dents in insulation jacket; some small cracks in the weld seams of the feet (see photos); 1 tank with nameplate (the outlet end of this tank is cut off) Speed: 42 rpm Outer diameter: 2,100 mm Inner diameter: 2,000 mm Total height: 4,550 mm Insulation: present Power: 2.2 kW Agitator: Beam agitator Support type: Feet Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: Dairy TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in top head Outlet: 65 mm Knodpfx Aasxqc Szenjf MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head Agitator features: Tanks with different impeller diameters; 1 tank with bottom bearing, the other tank without

Condition: new, functionality: fully functional, Year of construction: 2022, ATEX rotational valve, 1,5kw- 18rpm. Special heavy duty. Kjdpfx Aex Dzc Ejanjnf SEW drive with cooler fan. Special knive system. Special 5 line sleeve system. Inert gas adding hole. Possible to buy 2 new, and 5 slightly used valves.

Condition: excellent (used), functionality: fully functional, mileage: 1,12,617 km, power: 350 kW (475.87 HP), gearing type: automatic, fuel type: diesel, mast type: telescopic, Year of construction: 2017, operating hours: 4,795 h, Superstructure operating hours: 8,896 h Undercarriage operating hours: 4,795 h Knsdpfxoxg Ewfo Aansf As of 30.09.2025. Crane remains in operation. Counterweight trailer

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer by Thermo Scientific – a high-precision measuring instrument for rheological characterization of a wide variety of materials. Ideally suited for use in research, development, or quality control. The device is not operational, however, as the air bearing is defective. Technical Specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 rpm Speed range (CS mode): 10⁻⁷ to 1500 rpm Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special Features: Very high measurement accuracy due to low mass inertia Precision lift mechanism (0.5 µm adjustment accuracy) Modular expandability (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of Delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone. Kedpfjwv Nrhsx Aanenf

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents Knedpfx Aoff Sbioanof and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2021, operating hours: 10 h, condition: like new (used), functionality: fully functional, Kinexus lab+ rotational laboratory rheometer, configured with C25 cylinder package and 50N force cell, ideal for standard rheological applications in research and quality control. This equipment is designed for analyzing the rheological behavior of liquid and semi-solid materials, including viscosity, flow, thixotropy, and oscillatory testing. The lab+ platform offers precise control, thermal stability, and an intuitive interface, making it suitable for laboratories in the chemical, food, cosmetic, pharmaceutical, and polymer industries. Key features: Nsbk Rewp Inbslfcpsda Model: Kinexus lab+ Knjdpfoxp H Ukox Aansf C25 cylinder package - ideal for cylindrical (Couette) geometry measurements Maximum normal force: 50N - for sensitive applications and materials with low shear resistance Robust construction and high precision Compatible software for advanced control and analysis Available immediately

Condition: excellent (used), - Dimensions: 2480x1000x1450 mm - Year: 2006 - Packaging material: PVC, polyolefin, polyethylene, polypropylene - Maximum product length: 680 mm - Maximum product height: 220 mm Ksdpfxjwyc Udo Aansnf - Product weight: 0.25–10 kg - Maximum roll diameter: 600 mm - Sealing arm dimensions: 490 x 390 mm - Voltage: 400V - Weight: 360 kg - Overhauled equipment: The machine is prepared upon order; collection and return times are arranged at that moment (please request the price after overhaul).

Condition: as good as new (ex-display), operating hours: 1 h, Crate and basket washing machine. Plc controlled washing and drying tunnel for parts cleaning. Operating Principle : This is a worldwide patented machine which has a special procedure for washing and drying. (Patent number : 2016 / 02545) After the basket (or part like KLT, box etc.) is placed over the loading conveyor, a special unit locks and draws the basket inside the washing tunnel (auto loading) and once the basket is inside the machine spray washing begins. Basket is rotated 360 degre on its own axis while washing and drying. Rotation movement provides perfect washing and drying for the parts. All of the washing process is controlled via PLC. Machine has 2 washing unit , 2 rinsing unit and 1 drying unit. Cycle time : 30 seconds for 1 basket or KLT box Machine external dimensions : 12500 mm (length) Dimensions of basket: 600 x 400 mm , Height (adjustable) : Max : 280 mm Heating : Electrically heated with resistances. Knsdpfed Izzxex Aanef Washing pumps : Heavy duty stainless steel washing pumps. Automatic liquid fill valfes and liquid level control for all tanks. Machine will be manufactured according to your technical specifications. Please feel free to contact us for further details.