Used Banding for sale (3,204)

Automatic Banding Machine

Holz Her Streamer 1057 FÜ + PU

Call

Condition: used, Wood Her STREAMER 1057 FÜ + PU Bijbgvsia8a edge thickness 0.4 - 6 mm Modern control unit with selector switch for setting the units Pre-milling unit for joining before the gluing unit Fully automatic edge magazine for rolls and strips GLU-JET cartridge glue application station + PU gluing Glue application by means of nozzle technology Workpiece height 6-60 mm auto. Glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Pneumatic snipping unit for rolls and strips up to 6 mm edge thickness with pneumatic changeover from 0-10° cross-cut saw angle Trimming unit, flush trimming 6 mm, radius trimming - chamfer trimming - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - Finish Machine with all processing tools Machine is WORKSHOP TESTED in TOP CONDITION ( from leasing buyback )

more

Listing

Emskirchen

6,733 km

HIMA BA 30 / 800

Call

Condition: used, Year of construction: 2004, machine/vehicle number: 15005225, Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800Baujahr / Year 10/2004 - Serial-No. 15005.225 Bc3l8t2n2pc Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic filmTechnical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mmTaktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode buttonOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

more

Listing

D - Hessen

6,848 km

Holz-Her Triathlon 360

Call

Condition: used, Year of construction: 1997, Second hand machine Year of manufacture: 1997 Condition: well maintained Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feed for roll and strip material, automatic 1901 Adhesive application cartridge 1906 with sensing nozzle Printing unit pneumatic, motorized adjustment to edge thickness 1926 cross-cutting unit 2-motor, pneumatic swiveling 1918 Trimming unit rigid up to 30 mm 1962 Milling unit MOT 5 with multifunction flush, radius, chamfer 1966 Radius scraper 1927 corner copying 1983 Surface scraper 1964 Buffing unit 1944 Blowing nozzles Technical data: Workpiece thickness min./max.: 6/60 mm workpiece width min. 60 mm Df99r2c2cz workpiece length min. 140 mm glueing thickness max. 13 mm weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short term

more

Listing

Hüllhorst

6,887 km

BRANDT edge banding machine

Lange B 590K-PUR

Call

Condition: as good as new (ex-display), Year of construction: 2023, Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter. 3otuqhxq Standard machine incl. the following options : →electropneumatic pre-melting unit for 2 Kg Cartridge →motorized driving mechanism (patented) →supporting bars with steel balls 656b25108678f

more

Listing

NRW, Deutschland

6,955 km

BRANDT KS 23

€750

edge banding machine with auto device

Call

Condition: used, Type: KS 23 Year of construction: 1989 Condition: function-tested, very good, second-hand - edging material from 0.5 to 12 mm - workpiece height 10 to 50 mm - roll and strip magazine - hot-melt adhesive basin - pneumatic roll separating knife - saw cross-cut - flush/bevel trimming unit - feed 12 m/min. H32yd3s2

more

Listing

Wassylkiw

5,368 km

BIESSE STREAM B MDS 2.0/15.0

€2,99,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000023523, Functionality: fully functional, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. 2l02sc9gi Technical condition: the machine is currently used in production.

more

Listing

Spatenhof

6,372 km

OTT Pacific - Fügen PLUS

Call

Condition: used, OTT Pacific - Joining PLUS PLC control LCD display Immersion-controlled pre-milling unit fully automatic Roll and edge magazine Fast gluing station / overhead double roller top pressure with electr. positioning autom. infeed guide Flush trimming pneum. 0-3° Flush trimming/bevel trimming 15/30/45° - 8 mm Radius routing R-2, R-5 D7s7rss Corner rounding Radius scraper Surface scraper Soundproof cabin with room extraction Machine from small company with very few running meters in TOP CONDITION

more

Listing

Lambsborn

6,970 km

Felder G360-4

€12,900

Edge banding machine up to 20 mm

Call

Condition: excellent (used), Year of construction: 2020, Felder edge banding machine, L772kx222f Type G 360-4, jointing router, flush saw, routing, scraper round and straight With spraying device Type G 360-4, 2,8 kw, Year of construction 2020 With spraying device

more

Listing

D - Hessen

6,848 km

Holz-Her Perfect 1421

Call

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Qba903zau Glue thickness max mm 20 Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Availability: Short term

more

Listing

Barntrup

6,855 km

BRANDT KD 56

Call

total length: 3,100 cm, Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, Single-sided edge banding machine in right-hand version for hot melt adhesive gluing. Gluing section for hot-melt adhesive granulate. Glue supply below the glue roller. Glue application to the workpiece by means of a glue roller in synchronized and counter-rotation. Electronic glue pot temperature control. Automatic edge magazine for roll material and fixed lengths, incl. roll separating device and roll plate Diameter 800 mm Pressure zone with pneumatically driven main pressure zone and Special holding pressure roller for compressing the upper and lower glue joint Centrally adjustable top pressure Central manual chain conveyor lubrication Pivoting control panel at the machine infeed Cross-cut saw unit for front and rear edge overhang. High-precision linear guide. 2 motors each 0.18 kW, 200 Hz, 12,000 rpm, pulling cross-cut for high accuracy. Swivel range straight to bevel cross-cuts 0-15 degrees Flush trimming unit top and bottom with vertical and horizontal horizontal tracing 2 motors each 0.27 kW, 200 Hz, 12,000 rpm Scraper unit for PCV edges Scanning from above, below and sideways, for chamfering and rounding of pre-milled PVC edges. Edge thickness max. 3 mm, Buffing unit 2 motors for smoothing the edges at the top and bottom. 2 motors 0.09 kW each, individually suspended, inclined and height-adjustable Static frequency converter 200 Hz Electronic motor brakes for snipping and trimming unit Workpiece support extendable to 350 mm Pozbzddmw Noise protection cladding incl. central extraction nozzle diam. 100 mm Electrical equipment with modular control system for simplified service. Permissible ambient temperature min. +5°C / max. +35°C If the mains voltage fluctuates by more than +/- 10%, a voltage stabilizer must be installed. Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: * Fixed lengths 0.4 - 3.0 mm (max. 3 x 45 mm) * Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V, 3 phase, 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3,075 mm

more

Listing

Hüllhorst

6,887 km

edge banding machine with auto device

Lange B 500 K

Call

Condition: as good as new (ex-display), Year of construction: 2023, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal 3otk9cdp →Pneumatic cutt-off unit capacity max. 3 x 30 mm →Turntable D=600mm 656b2510887b5

more

Listing

Wassylkiw

5,368 km

BIESSE STREAM B MDS 2.0/15.0

€2,98,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000023497, Functionality: fully functional, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Bikgufmwl90 Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

more

Listing

Hüllhorst

6,890 km

Lange B85 KF

Call

Condition: like new (used), Year of construction: 2021, Joining, glue specification, crosscut saw, combination cutter, radius and surface scraper Dm22lh

more

Listing

Gizałki

6,268 km

Paul OTT L-SHARK PU EVA

€25,000

Edge banding machine *available* immediately

Call

Condition: excellent (used), OTT L-SHARK Additional glue system external melting device multi melt system OTT type CMTA Modular glue system for processing EVA glue and PU glue with easy and quick exchange of pre-melted container edge material max. heating temperature of the funnel/cavity 230°C Time control 15 min Container capacity / granules 2 kg Quantity of pumping in manual mode min/max 50/500g Quantity of pumping in automatic mode max 200g Glue temperature (feeding) 140/160°C Feed channel with hose PUR glue from external tank pre-milling grout 2 motes, parallel and countercurrent gear top speed glue tank interchangeable suitable for PU glue with automatic parallel and counter-rotating control of the application roller automatically controlled edge magazine material in roll pneumatic guillotine pressure zone large roller board heating zone before glue application cutting units 2 front/rear dripping saws milling aggregates radius r1 r2 adjustment from the desktop servomotors aggregates for rounding the ends of the corners two motor copying the corners aggregate profile/radius cyclone for PVC and plastic edges, automatically controlled flat / glue scraper aggregate cleaning polishing aggregate OTT control system aggregates clocking NC axes RIEPE spraying device 3 points beginning middle end release agent sprayed on the workpiece cleaning agent sprayed before the cleaning unit antistatic coolant sprayed after edge banding Cb9jnb8

more

Listing

D - Nordrhein-Westfalen

6,955 km

Holz-Her Streamer 1057 XL C

Call

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 E2kuvfi Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control. Extendable workpiece support 600 mm Infeed ruler long 1252 mm Joining milling unit 2 motors DIA jointing cutter 70 x 64x 30 mm Z2+2 link. and clockwise rotation edge feeding 1903 fully automatic Glujet 301 glue application system Automatic reloading function Storage shaft for 1.4 kg cartridges ( 4 cartridges) GluJet collecting tray Printing unit 1912-3 pneumatic Spraying device GM 201 after printing unit Kappagregat 1918 pneumatic Suction hoods for Kappagregat Combination milling unit FR201 with DIA cutters R=2 mm Form milling unit 1832 Shelf program Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Spraying unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short term

more

Listing

Wijchen

(dealership location)

7,087 km

Edge banding machine Edgebander Holz-Her Uno 1307

Holz-Her Uno 1307

Call

Condition: used, Year of construction: 2008, Edgebander Holz-Her Uno 1307 Year of construction 2009 380V Czidlgmy93 Pre-milling unit (1801), 1x1.2kW &amp 1x0.8kW Multi Glue System (1906), For EVA and PUR adhesives in cartridge Press Unit (1912) Edge saw unit Cutting unit (1824), 2x06kW, 18000rpm Shoulder milling unit (1832) Profile scraper (1929) Flat scraper (1895-12), arranged separately above and below Edge thickness 0.4 - 3mm Edge height 50-55 mm Workpiece width min. 65mm Workpiece length min. 160/210mm 4200x1000x1400mm (LxWxH), +/- 1500kg

more

Auction

Krefeld

7,028 km

one. Edge banding machine

Brandt KD 83

€1,500

One more day

Details

Condition: used, Year of construction: 1996, machine/vehicle number: 0-261-03-5 66 7, Make: Brandt Nkvylfsro Type: KD 83 Year of construction: 1996 Machine no.: 0-261-03-5 66 7 Category: Wood

more

Listing

Freising

6,652 km

pallet banding machine

Bornbinder, Born Schweiz AG

Call

Condition: used, Year of construction: 2006, Capacity: 100 pallets/h Operating pressure: 5 bar Power: 5 kW Voltage: 3 x 400 V Bo2mptbp Frequency: 50 Hz Operation / Control: unit with pallet binder art.-n°: 204344CK

more

Listing

Emskirchen

6,733 km

Automatic Banding Machine

HIMA BA 30

Call

Condition: used, machine/vehicle number: 928511, Automatische Banderoliermaschine - Automatic Banding Machine Lilie 240-30Serial-No. 928511 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic film Technical specifications: Leistung / Output: up to 25 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 220mm Taktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Abmessungen / Dimensions: 540(L) x 350(W) x 220 (H) mm Elektrischer Anschluß / Power supply: 230 V ~, 50 Hz, 200 W Gewicht / Weight: 32 kg-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- Gyqpxw -On Stock Emskirchen / Nürnberg - Can be test-

more

Listing

Spatenhof

6,372 km

Edge banding machine Edgebander Cehisa EP-7

HOLZ-HER Auriga 1308 FÜ + PU

Call

Condition: excellent (used), Wood Her Auriga 1308 FÜ + PU compact design - edge thickness 0,4 - 8 mm PLC screen control Edge-Control PPC 221 color screen Pre-milling unit for joining before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU JET cartridges + PU gluing - Multisystem + glue application by means of nozzle technology workpiece height 6-65 mm autom. glue height adjustment printing unit 1912-3 pneumatic cross-cut unit 1918 pneumatic for rolls and strips up to 8 mm edge thickness with pneumatic changeover from 0-10° slant of the cross-cut saws trimming unit 1827 MOT 4, flush trimming 8 mm, radius trimming - chamfer trimming - 15° 1827 MOT NC axes via control panel Shape milling unit 1832 pneum. rounding of corners up to edge thickness 3mm in throughput scraper unit 1929 for chamfers and radii with 2 scraper carriers via control panel surface scraper unit - finish spraying unit - PU Rchlt9ij complete DIA tooling incl. first delivery 2013 machine like NEW in TOP-CONDITION

more

Listing

D - Nordrhein-Westfalen

6,955 km

Edge banding

Holz-Her Uno 1307

Call

Condition: used, Year of construction: 2008, Second hand machine Year of manufacture 2008 Basic machine with manual pressure bridge adjustment Joining unit 1801 with 2 units Automatic edge magazine 1806-2 for rolls and strips Cross cut shear up to 3 mm Glue system cartridge 1906M with tactile nozzle; automatic glue height adjustment Printing unit 1912-3 with 3 pressure rollers; 1. roller driven cross-cut unit 1822 2 motors Combined trimming unit 1825 r=2 mm flush/radius 2 motors corner copying unit 1832 corner copying function up to 3 mm material thickness Radius scraper 1929 Surface scraper 1964 Chip catcher box Feed rate: 10 m/min Max. edge thickness: 3 mm F89ebvl77x Working dimensions 6 - 45 mm minimum workpiece width 65 mm minimum workpiece length 210 mm Heating time: Approx. 3.5 min Weight approx. : 1500 kg Dimension : 4200 x 1000 x 1400 mm Suction diameter : 1 x 100 , 1 x 80 , 1 x 80 mm Location: Hochheim Availability : by arrangement

more

Listing

Wijchen

(dealership location)

7,087 km

Cehisa EP-7

€2,750

Call

Condition: used, Edge bander Cehisa EP-7 Min workpiece length 120mm Min workpiece width 75mm Min/max workpiece thickness 8/45mm Min/max belt thickness 0.4/5mm Speed 10m/min Required air 6-7bar Total power 4kW Dimensions 3110x1800x1250mm (LxWxH), 750kg J0orai

more

Listing

Grońsko

6,384 km

Nikmann

€1,990

Call

Condition: good (used), Stoman veneer machine glue granulate tank, applied with a roller pre-cut guillotine pressure rollers cut-off balls up and down cutters easy to use 9u9umny83i compact dimensions used machine, good condition

more

Listing

Holz-Her Kantenanleimmaschine HOLZ-HER 1030 ARTEA

D - Nordrhein-Westfalen

6,955 km

Edge banding machines

Holz-Her Kantenanleimmaschine HOLZ-HER 1030 ARTEA

€34,590

ONO plus VAT

Call

Condition: as good as new (ex-display), -Exhibition machine- Maximum user-friendliness, precision and reliability for years to come thanks to the torsion-resistant welded machine stand. TECHNICAL DATA Edge banding machine for edging and finishing of panel-shaped materials (e.g. chipboard, MDF, blockboard etc.) Edge thickness of rolls: 0.4 - 3 mm Edge thickness of strips: 0.4 - 5 mm Max. edge height: 55 mm Workpiece thickness: 8 - 50 mm Edge cross-section 5 x 50 mm (depending on material) min. Workpiece width: 70 mm min. Workpiece length: 180 / 210 mm Feed speed: 9 m/min. Control technology and operation: With rotating control panel, dust-proof. Extremely simple operation via the graphically supported 15.6" touchscreen and the VISE function and glue library. glue library. Glue application with Glu Jet: Highly flexible adhesive application using patented nozzle technology. EVA and PUR adhesives as standard can be processed without complex and expensive additional equipment. Neutral or colored adhesive can be changed in changed in no time at all. Lowest energy costs thanks to the shortest heat-up time of 3 minutes. Unit technology: Modern and solid processing units, Bh33gnypg7c continuously further developed based on our 50 years of experience in edge banding, ensure the high-quality high-quality processing of your edges and guarantee your product quality on the finished furniture. Tool technology: State-of-the-art milling technology tailored to your area of application. Accessories: The extensive range of accessories extends from nesting package through to high-tech spraying systems. . (Visual Setting Mode) As a digital logbook, VISE provides all setting values for the digital counters and pressure gauges to set up the machine quickly and safely. quickly and safely. The display is interactive via the 15,6? touch control panel. New exhibition machine

more

Listing

Hüllhorst

6,890 km

Hebrock HFF08 weitere

Call

Condition: good (used), We offer various molding machines for gluing or processing edges up to 2 mm. Ljc9aklxcr Hebrock, Lange, H&W. Many shapes are possible. Clarification according to sample or drawing.

more

Listing

Tattendorf

6,310 km

Banding machine

DALLIPAK DB40/30

Call

Condition: refurbished (used), Year of construction: 2019, Product width: ca. 25 mm to 400 mm Product hight: ca. 5 mm to 250 mm Tension: soft to strong Band width 28 mm Roll lenght: up to 1500 m Core holder: 76 mm Pmntzpidm

more

Listing

D - Nordrhein-Westfalen

6,955 km

Edge banding machine Edgebander Cehisa EP-9

Lange Maschinenbau B 90 KFE

Call

Condition: used, Year of construction: 2017, Second hand machine Year of manufacture: 2017 Condition: Function tested Equipment and technical data: Joining milling unit with slide tools Automatic edge feeding EVA/PUR glue basin with run-out function Pressure zone High-frequency cross-cut saw High-frequency combi-milling station ( radius, chamfer, flush) Corner copying unit Radius scraper unit Surface scraper unit Buffing unit Front and rear spraying unit Touch screen Technical data: Workpiece thickness: 8 - 60 mm Workpiece width: min. approx. 75 mm Workpiece length: min. approx. 120 mm (min. approx. 180 mm with corner copying) edge thickness: 0.4 - 3.0/5.0 mm Chip removal joining unit: 0 2.0 mm infinitely variable edge height max. = workpiece height + 4 mm (2+2) electrical connection: 400V, 50 Hz , 3Ph + N 9tp0nftd03 total connection: 7 kW feed speed: 5,5 8,0 m/min. Pneumatic connection: 6 bar net weight: 940 kg Space requirement: 4,095 x 1571 x 1305 mm Location: Solingen Availability: Short term

more

Listing

Wijchen

(dealership location)

7,087 km

Cehisa EP-9

€3,950

Call

Condition: used, Edge bander Cehisa EP-9 Min workpiece length 120mm Min workpiece width 120mm Biiepovwdzs Min/max workpiece thickness 8/45mm Min/max belt thickness 0.4/5mm Speed 10m/min Required air 6-7bar Total power 3.5kW Dimensions 3380x1800x1250mm (LxBxH), 925kg

more

Listing

Lange B 90 KFE Plus mit Fügen + Eckenkopieren

Hüllhorst

6,887 km

Lange B 90 KFE Plus mit Fügen + Eckenkopieren

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Djh922 Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

more

Listing

Gerolzhofen

6,761 km

Hebrock F 4

€36,400

Call

Condition: new, - New - year of construction 2022 technical description: - with PLC control (incl. touch screen) and hot-melt adhesive specification to the workpiece for edge material up to 3 mm: - joint milling (incl. DIA-tool) up to 2 mm milling depth - jointing thickness miximal 1 mm beispecial materials like e.g. multiplex maintenance-free glue basin with change basin pre-equipment incl. glue discharge device, - HF cross-cut saw station (approx. 12000 rpm), - HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design) corner rounding cutter, surface scraper (incl. pneumatic lift-out), robust chain drive ball bearing mounted double roller top pressure, viewing window from machine rear side, extractable workpiece support, feed approx. 7m/min Order . F4/00/01 Including: - equipment with jointing milling heads Whispercut Art.-No. F4/500/10 - equipment milling unit with combi milling heads Art.-No. F4/500/20 - equipment combi milling heads Radius 2,0 mm Art.-Nr. F4/500/2 - Equipment corner trimming unit with radius R 2,0 mm Art.-No. F4/08/2 Qjxa9 - Quick change equipment for corner trimming unit Art.-No. F4/08/4 - Ball bearing for corner rounding unit 24,1 mm special size Art.-No. F/2001-500-154-A2 - Ball bearing for corner rounding unit 24,2 mm special size Art.-No. F/2001-500-154-A3 - Radius scraper including pneumatic lift-out device Art.-No. F4/09 - Radius scraper radius R=2,0 mm Art.-No. F4/09/2 - Trolley Art.-No. F4/10 - Separate pneumatic 3-point-adjustment (straight/bevel/radius) Art.-No. F4/30

more

Listing

Penz

6,447 km

Ott Uni Matic (Betriebsauflösung )

€2,100

ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 1990, Functionality: fully functional, Edge gluing machine works and is in little use in a small business, therefore in good condition. Built in 1990, machine can be inspected at any time. 8l9yf7hm8b Included: Hot melt glue application with rapid heating cutting unit Milling and fiber milling Dimensions: 6.8m x 0.9m x 1.34m l x w x h Weight: approx. 2000 kg Workpiece dimensions: Width: min. 6cm Height: min. 1 - max. 6cm Length: min. 16cm strip edges, 6cm to endless (edge from the roll) Throughput speed: 12 - 18m/min. Connection: 16 kW total all units.

more

Listing

Linz

6,461 km

Edge banding machine with joining

Lange Maschinenbau B90KFE

€20,900

EXW ONO plus VAT

Call

edge thickness (max.): 6 mm, overall weight: 1,150 kg, temperature: 160 °C, operating pressure: 6 bar, Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 548, Functionality: fully functional, Edges: Melamine/PVC/ABS/PP/veneer: 0.4 ÷ 3.0 mm Wooden strips: up to 6 mm Workpiece thickness: 8 ÷ 60 mm Workpiece length: min. approx. 120 mm (min. approx. 200 with corner copying) Workpiece width: min. approx. 75 Equipment: Radius scraper unit with blow-off device Flat scraper unit Buffing unit EVA/PUR glue pot with outlet function - "workshop overhauled" 2ti8hqmm Diamond tools height=65mm for joining unit Automatic positioning of the units - 2 preset edge thicknesses 0.4+2.0mm Riepe spraying device - Anti-stick on joining unit Riepe spraying device - cleaning spray in front of buffing unit Pneumatic setting ON/OFF for radius scraper Pneumatic setting ON/OFF for surface scraper Dimensions: approx. 4200 x 880 x 1640 mm Net weight: approx. 1150 kg PRICING IN FUNCTION-TESTED CONDITION

more

Listing

D - Nordrhein-Westfalen

6,955 km

Brandt KDF 110

Call

Condition: used, Year of construction: 2013, Used machine Year of construction 2013 Single-sided edge banding machine Joint trimming unit 2 x 2.2 kW 200 HZ Gluing unit A3 Trimming unit chamfer/straight 2 x 0.18 kW Trimming unit 2 x 0.27 kW counter rotation Profile scraper Surface scraper VKNR 5820 Feed rate 8 m/min Electric control Easy Control EC 10+ Workpiece width min: - for workpiece thickness 12-22mm ¦ 70 mm* - for workpiece thickness 23-40mm ¦ 120 mm* *Depending on the workpiece length Workpiece protrusion ¦ 38 mm Workpiece thickness ¦ 8 - 40 mm Dm3zob Max. edge height = workpiece height ¦ + 5 mm Edge material roll ¦ 0.4 - 3 mm Edge cross-section max: - for PVC ¦ 135 mm² - for veneer ¦ 100 mm² - Max. roll diameter ¦ 830 mm - Edge material strips ¦ 0.4 - 3 mm Edge cross-section max: - for strips ¦ 165 mm² L x W x H 3672 x 1454 x 1982 mm Availability: at short notice Location: Solingen

more

Listing

Wijchen

(dealership location)

7,087 km

Edge banding machine Edgebander Biesse Akron 1320

Biesse Akron 1320

€9,500

Call

Condition: used, Year of construction: 2013, Edge banding machine Biesse Jade 340 Serial No. 40278 Year of construction 2013 Glue unit Fioa9npf Edge trimming unit Fine trim unit Edge scraper unit Poloshing unit Panel height 10-60 mm Height of the edging material 14-64 mm Thickness of material to edgeband in rolls/strips 0.4-8 mm Panel overhang 25 mm Minimum panel length 150 mm Minimum panel width (with 140 mm length) 85 mm Minimum panel width (with 250 mm length) 50 mm Speed up to 12 m/min. Dust extraction system for each working unit 1 nozzle dia. 100mm Pneumatic connection 7 Bar Glue pot capacity (approximately) 2 kg Warm-up time glue pot at half load (approximately) 10 minutes 400V, 6kW Dimensions 4200x900x1600mm, Weight 1200kg

more

Listing

Lange B 92 KFE - L-Motion / bis zu 7-Achsen

Hüllhorst

6,887 km

Lange B 92 KFE - L-Motion / bis zu 7-Achsen

Call

Condition: as good as new (ex-display), Year of construction: 2023, 656b25104b327 7ooz7d2fty

more

Listing

Gerolzhofen

6,761 km

Hebrock F 4

€31,900

Edge banding machine with return

Call

Condition: new, New - edge banding machine with PLC control (incl. touch screen) and hot melt glue application to the workpiece for edge material up to 3 mm jointing cutter (incl. DIA tool) up to 2 mm milling depth1) maintenance-free glue basin with change basin pre-equipment e discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm.) with separate pneumatic routing adjustment and interchangeable plate router (combination version) corner rounding router surface scraper (incl. pneumatic lift-out) free space (for fettling station or radius scraper) robust chain drive ball-bearing double roller top pressure viewing window from machine rear side pull-out workpiece support feed rate approx. 7 m/min. Technical data: Max. joint thickness 2 mm Max. Edge thickness 3 mm Min/kpiece thickness 8 - 50 mm Min. workpiece width 80 mm Min. workpiece length 180 mm Feed speed approx. 10 m/min. Ready for operation approx. 3,5 min. Max. power consumption Power consumption Ø approx. 7,4 kW Electrical connection 400 V - 3 Ph - 50 Hz Machine dimensions approx. 4050 x 1450 x 1500 mm (LxWxH) Working table height 850 mm Suction connection Ø 1 x 140 mm Weight approx. 840 kg Order-No. F4/00/01 Included: Cdnmwrzimx - Equipped with jointing heads Whispercut . F4/500/10 - Equipment milling unit with combi milling heads Art.-No. F4/500/20 - Equipment combi milling heads Radius 2,0 mm Art.-No. F4/500/2 - Radius corner milling unit R=2mm Art.-No. F4/08/2 - radius scraper (incl. pneum. excavation) Art.-No. F4/09 - radius scraper R=2mm Art.-No. F4/09/2 - trolley Art.-No. F4/10

more

Listing

Holz-Her Sprint 1329 performance mit Return Barbaric RTS 0

D - Bayern

6,672 km

Holz-Her Sprint 1329 performance mit Return Barbaric RTS 0

Call

Condition: used, Year of construction: 2018, Second-hand machine Used edge banding machine from Holz-Her Sprint 1329 Performance with return from Barbaric type RTS 01 Edge banding machine: Ekoy8gg0x Year of manufacture: 2018 Roller Bridge Motorized 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control automatic, program-dependent fine adjustment Infeed ruler standard B20 mm Infeed ruler for precise feeding of the workpiece Edge Control 19 control with 18.5" touchscreen 16:9 color screen Joining milling unit 1802 (2 x 2,0 kW, 2OO Hz, 1 20OO min-1 ) with 2 milling units for joining the panel edge. (1x climb milling, 1 x up-cut milling) edge feeding 1901 SYNCHRO automatic transport of roll and strip material Glue application station Glu Jet GJ301 automatic (2,3 kW, 50 Hz) printing unit 1913 motor driven 1 roller, 2 holding pressure rollers spraying unit (release agent) after printing unit with 2 spray nozzles for covering up to 60mm working height trimming unit 1918 (60 mm) pneumatic (2 x O,45 kW, 12000 min-1) pneumatic swivelling 0/10° Milling unit FR701 100% repeatability at the push of a button due to backlash-free mechanics Form milling unit FF701 100% repeatability at the push of a button due to backlash-free mechanics Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers, FK701 surface scraper with pre- and post-feeding for removing adhesive residue Motorized adjustment infeed guide for precise feeding of the workpiece to the joint milling unit, Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spraying unit 1856 for the infeed and outfeed area: Buffing unit 194O (2 x O.12 kW, 50 Hz, 14OO min-1) For finishing and polishing edges. With 2 textile discs, swiveling range 0 - 5°. RETURN control connection (EMERGENCY stop interlinking) Connection of a workpiece return to the HoLZ-HER control system Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return System: Year of manufacture: 2018 Machine number: 2180122-206 for more details please refer to the PDF availability: after arrangement Location: Röllbach

more

Listing

Wijchen

(dealership location)

7,087 km

Edge banding machine Edgebander Casadei K30/10

Casadei K30/10

€3,750

Call

Condition: used, Year of construction: 2005, Edgebander Casadei K30/10 Year of construction 2005 Jpejnydo3 Machine No. 3969 Minimum workpiece length 120 mm Minimum workpiece width 75 mm Min/max workpiece thickness 10/45 mm Min/max edge band thickness 0.4/3 mm Speed 7 m/min Total power 3.5kW, 400V Dimensions 2200x800x1300mm (LxWxH), 405kg

more

Listing

Hüllhorst

6,887 km

Lange B 80 KF-VR mit Fügen+VR Funktion

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen G807oypfm →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 656b25108477f

more

Listing

D - Bayern

6,672 km

Edge banding machine Edgebander Hebrock EURO 2000

Holz-Her 1437 expreß

€950

ONO plus VAT

Call

Condition: used, Year of construction: 1988, Second hand machine Year of manufacture: 1988 Condition: according to age glue thickness 0,3 - 13 mm glueing length min. 200 mm Workpiece width min. 85 mm Workpiece length min. 180 mm Workpiece thickness 6-45 mm Feed rate 13 m/min electrical connection value 7 kW machine length 4430 mm Cbppjmzx machine width 1020 mm Machine height 1200 mm with edge feeding 1901 fully automatic with adhesive application station cartridge with trimming unit 1976 with trimming unit 1942 for flush trimming and chamfering 0 - 15°. with milling unit 1943 for radius milling with r = 3 mm max. with buffing unit 1944 weight 955 kg Availability: short term Storage location: Röllbach

more

Listing

Wijchen

(dealership location)

7,087 km

Hebrock EURO 2000

Call

Condition: used, Year of construction: 1996, Edgebander Hebrock Euro 2000 Ckhlemhcb Built in 1996 Minimum panel length 250 mm Minimum panel width: 70 mm Min/max thickness of panel: 10/40 mm Min/max edge thickness: 0.4/5 mm Feed speed: 11 m/min Warm-up time about 4.5 min Power Requirement: 415 V - 3 Phase - 20 Amp Isolator Compressed air: 7 Bar Transport dimensions: 3300x1400x1300mm (LxWxH) weight 550kg

more

Listing

D - Bayern

6,672 km

Edge banding machine with joining and corner copying

Lange Maschinenbau B 90 KFE

Call

Condition: used, Year of construction: 2015, Second hand machine Buyear: 2015 Epg7hqgeuv Condition: Factory overhauled at Lange Maschinenbau in 2019 Equipment and technical data: Joining milling unit with 2 DIA-equipped milling heads 45 mm high. EVA/PUR glue pot with discharge function Pressure zone Crosscut saw with 2 saw blades Combination milling station for radius, flush and chamfer milling Control with touch panel Corner copying unit Radius scraper Surface scraper workpiece thickness 8 - 50 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 150 mm with corner copying) edge thickness 0.4 - 3.0/5.0 mm Chip removal joining unit: 0 2.0 mm infinitely variable max. edge height = workpiece height + 4 mm (2+2) Electrical connection 400V, 50 Hz , 3Ph + N total connection 7,5 kW feed speed 5,5 - 8,0 m./min. Pneumatic connection 6 bar Net weight 850 kg Today's new price: 36350.- + VAT. Location: Röllbach Availability: Short term

more

Listing

Wijchen

(dealership location)

7,087 km

Edge banding machine Edgebander Comeva Explorer

Comeva Explorer Super Plus 4TR+R

Call

Condition: used, Year of construction: 2020, Edgebander Complete machine with milling, gluing (with additional heat lamp), trimming, milling, corner rounding, scraping, brushing, additional unit groove cutter for cabinet ledges. Comeva Explorer Super Plus 4TR+R Year of construction 2020 Lace band thickness 0.4 - 3 mm Workpiece length min/max. 120mm/unlimited Workpiece width min./max. 80mm/unlimited Workpiece thickness 8 - 50 mm Throughput speed 4 - 15 m/min 7snt2zt7fm Dimensions 6670x1115x1665mm (LxWxH), weight 1800 kg

more

Listing

D - Hessen

6,848 km

EBM KDP 112 SLK

Call

Condition: used, Year of construction: 2001, Second hand machine Used edge banding machine of the company EBM type KDP 112 SLK year of manufacture: 2001 MNo.: 361 Connected load: 7 kW Crosscut saw unit: electric - pneumatic controlled, motor power 0,37 kW flush trimming unit: radius, straight and chamfer trimming Caps from the roll up to 3 mm Gluing and cross-cut sawing up to 5 mm Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Cfgodqfxvm Availability: short term Storage location: Hochheim

more

Listing

D - Hessen

6,848 km