A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance.
The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy...
band saw according to CE and with the following features
strong cast iron work table, inclinable
balanced cast iron fly wheels
saw blade guide, telescopic
saw blade tensioning indication
upper and lower saw blade guide
cleaning brush for the lower fly wheel
sturdy AL fences
Dnurgknkw
max saw blade width 16 mm
suction connection under the table
micro switches on machine doors
work table dimensions 600 x 520 mm
working table height 900 mm
fly wheel DM 450 mm
fly wheel speed 700 U/ min
max cutt...
Wheel diameter 1.250 x width of blade 6 inch (155 mm) . Main motor 30 KW (40 hp ) with double rotation speed. Super condition .
Be82ru2cmx
Diameter of saw wheels mm 800
Max. cutting height mm 400
Stationary working table mm 1290 x 800
Max. blade width mm 54 x 0,9
Max. and min. blade length mm 5530 / 5380
Motor power Kw 15 (HP 20)
Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100
Mlmxw77x
Compressed air consumption (wheels braking and feeder opening) bar 6
Net weight Kg 880
Feeder
Height of feeding carpet mm 300
Length of carpet fence mm 750
Idle rollers dia. mm 160
Max. rollers-blade clearance mm 200
Max. fence-blade clearance mm 200
Vari...
Thin layer from 2 mm thickness
Maximum cutting accuracy up to ± 0.15 mm
Minimal kerf, cutting thickness from 1.3 mm
Ideal for the cutting of dried and wet wood or alternative materials
Surface of the thin layer ready for gluing without need of further processing steps
Friendly user electronic control
Mtjlj
Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life
Optical sensor to start cutting cycle and speed change
Ground table
“Flexam” bel...
Welded steel frame
Perfectly balanced cast iron wheels mounted on closed ball bearings
Cast iron table tilting up to 45 ° (20 ° CE) to the right.
Mv8hh8
Telescopic protective tape guide
Automatic wheel braking (ce): self-braking motor in ø600 / 700 mm and air braking in ø800 / 900 mm.
Motor protection switch with coil release (CE).
The key that locks the door.
Belt tension indicator.
Precise top belt guide.
Bottom belt guide with wooden inserts.
Safety switch (CE): on CO600 / 700 it is located o...
Technische Daten:
fly wheel DM 800 mm
Max. cutting height 400 mm
Max. max cutting width 780 mm
Pzlx7qphm
tabel dimensions 580 x 810 mm
tildable table 15 Grad
Max. saw blade dimension 80 x 0,8 mm
saw blade length 5380 - 5530 mm
motor 11,0 kW, 400 V, 50 Hz
suction 2 x 100 mm
fly wheel speed 680 U/ min
suction DM 1 x DM 100 mm & 2 x DM 120 mm
compressed air 6 - 8 bar
machine weight: ca. 850 kg
machine dimensions L x B X H 1550 x 950 x 2500 mm
welded steel structure, fully closed
pneumatic bra...
Latest technology and performance: WRAVOR WRC 1150 AC band saw from WRAVOR to achive:
- maximum cutting capacity.
Bhcbogws
- minimum labour.
- faster hydraulic functions for log manipulating, possible new patented system for logturning systems.
- the fastest moving head with saw with special Servo Drive system - on demand!
- many options of equipment on the saw.
- construction improvements.
- high degree of automatization with Siemens program or Unitronics, always with option with manual control...
Primultini 1100 band sawing line with cut-off or centre cutting device
Gtek3bywq
the mechanization is from Jonab AB and consists of:
-lifting table
- Slat removal belt
- Cross conveyor
- Conveyor belt feed to the machine left or right
Please also visit my other advertisements.
I look forward to your inquiry.
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Speed: 0.8 m/sec
-Drive: 0.12 kW
-Belt width: 790 mm
-Length: 605 mm
-Body made of: aluminum
-Transport dimensions: 950/630/H955 mm
Beudhxnkbn
-Weight: 58 kg
Contact for further information with us together.
Q3ygzpw
Band saw with feed CB 900
- after the technical review
O2iu7
- very good condition
TECHNICAL SPECIFICATIONS:
engine power 12.6 kW
max. cutting height 460 mm
cutting height with a feed of 240 mm
max. cutting width 680 mm
cutting width with a feed of 130 mm
max. workpiece width 330 mm
max. belt width 80 mm
10 types of feed speed 2.5 / 4/5/7/8/12/14/19/24/38 m / min
table top dimensions 970 mm x 810 mm
adjustable table top
double-sided tape guiding
table top height from the base 1000 mm
machine...
Conveyor with internal drive 1000x120 mm with adjustable speed.
Bozkd2mvbd
We have 6 pcs for sale.
HOLZMANN HBS 500 band saw
Manufacturer HOLZMANN
Model / type of the HBS 500 machine
Production year 2014
Machine category Band saw
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
Iejqh3r
2.2 kW ENGINE, 500 mm WHEEL DIAMETER, TABLE SET AT ANGLES, VERY GOOD CONDITION, ADDITIONAL SAWS AS TOOLS
Width belt: 650mm, length belt: 2500mm, capacity: 70kg max., height frame: 80mm, as good as new.
Cd07jgcu
Wide belt sander sanding width 1100 mm
1. aggregate rubberized roller
2. Unit electron. Gliederschuh 3 stage motor with left and right rotation selectable
3. Unit electron. Gliedersachuh with infinitely variable belt speed
4. blow-off nozzles channel
Ntenj
Feed 2 stage
Vacuum carpet
neu
ca. 10 Wochen ab Auftrags
Türkei
9400
178.6
3660x27x0,9 mm
20-100 m/min
320 mm
300 mm
320x300 mm
640 mm
0.12 kW
0.37 kW
1.5 kW
1900 mm
850 mm
1300 mm
765 kg
blade brush
control panel
height adjustment switch
hydromechanical blade tension
Bwwzatmjuy
inverter
mechanic top clamping
material length stop
coolant pump
saw blade
security switch
1,2 meter roller table
users manual in GERMAN or ENGLISCH
BAND SAW (FULLY AUTOMATIC)
Make MEP (ITALY), type SHARK 320 AX, year 2003,
cutting diameter 260 mm
saw band length 3150 mm
cutting width 320 mm
working height 970 mm
cutting speed 36 / 72 m/min
Vise opening max. 325 mm
saw band dimensions 3150 x 25,4 x 0,9 mm
Cutting range at 90 degrees: around 260 mm
Cutting range at 90 degrees: square 250 mm
Cutting range at 90 degrees: rectangular 320 x 200 mm
Cutting range at 45 degrees: around 230 mm
Cutting range at 45 degrees: square 210 mm
Cutting range ...
Vertical band saw and band filing machine make JAESPA type AS 4
make # 735401, year of construction 1973
technical data:
Roll diameter 420 mm
cutting height under guide 450 mm
cutting width 400 mm
Band speed 16 - 1600 m/min
saw band length 3200 - 3400 mm
table size 660 x 660 mm
Table load 350 kg
Saw motor 2,2 kW
Grinding motor
Outer dimensions L x W x H 660 x 900 x 1920 mm
weight 690 kg
with
- band saw welding unit BSO-16
- grinding stone
- inclinable table
- fence
Gczjikv
- lighting
- emergency...
cutting diameter 410 mm
saw band length 6150 x 41 x 1,3 mm
cutting width 410 mm
Control Berg & Schmid
saw blade turning speeds 12 - 110 m/min
Bup9diad7t
total power requirement 10 kW
weight of the machine ca. 3,5 t
dimensions of the machine ca. 3,50 x 2,00 x 2,20 m
Vertical bandsaw FLOTTJET Type 491510
machine. No.: 24910213 Year of construction approx. 1980
throat 405 mm
table size 400 x 400 mm
cutting height max. 155 mm
roller diameter 200 mm
working height 1000 mm
band speed approx. 7,5 and 15 m/sec. 2 steps
saw band dimension 2125 x 13 mm
drive power 0,25 / 0,45 kW
Mains connection 380 V 50 Hz
- saw band speed via 2 motor speeds
- swivelling working table
- mobile on metal base
3lls3me
- for wood and bundle metals
space requirement L x W x H 1000 x 600...
AMADA H450H year 1987
Sawcapacity: 450 x 400 mm
Bhwfnlfvpm
Sawspeed: 27 - 70 m/min.
Variomatic
Sawbelt: 4.670 x 38 x 1,4 mm
Featured with: - Hydraulic clamping
- Bundleclamp
- Cooling
Country of Manufacture: Japan
Machine weight: 1.000 kg
very good condition
neu
ca. 10 Wochen ab Auftrags
Türkei
7400
140.6
2730x27x0,9 mm
35-70 m/min
230 mm
230 mm
240x230 mm
590 mm
0.12 kW
0.37 kW
1.3 kW
1700 mm
800 mm
Bwwy9wyyyv
1500 mm
530 kg
blade brush
control panel
height adjustment switch
hydromechanical blade tension
inverter
mechanic top clamping
material length stop
coolant pump
saw blade
security switch
1,2 meter roller table
users manual in GERMAN or ENGLISCH
- Motor 3 / 4 PS / 230 V
- Schleifbandlänge 1220 mm
- Schleifbandbreite 150 mm
- Schleiftellerdurchmesser 228 mm
- Tischgröße 310 x 190 mm
- Tisch schwenkbar
- Schleifauflage 440 x 170 mm
- Schleifauflage schwenkbar
Muvado
- inkl. Unterschrank
- inkl. Gehrungsanschlag
- Gewicht 55 kg
NEW
Precision band saws for the
ambitious craftsmen
A particularly quiet and precise run thanks to one
torsion-free machine housing and one
solid base made of sheet steel
Gray cast iron saw table with precisely ground
and polished surface
Comfortable laser device for cutting line
mark
Saw band quick clamping via eccentric lever
on the back of the machine
Standard with two speeds
Precise 3-roller saw band guides,
standard top and bottom from HBS 351
Fast cutting height adjustment via
Knob and ra...
cutting capacity round:270 mm
cutting capacity flat:350 x 220 mm
cutting capacity square:260 mm
capacity 45 degrees: round left:240 mm
capacity 45 degrees: round right:210 mm
capacity 45 degrees: flat left:240 x 160 mm
capacity 45 degrees: flat right:180 x 180 mm
capacity 45 degrees: square left:220 mm
capacity 45 degrees: square right:180 mm
capacity 60 degrees: round right:160 mm
capacity 60 degrees: flat right:150 x 150 mm
capacity 60 degrees: square right:150 mm
sawing motor:0,75 - 1,5 kW
c...
4
VB 300 - Vertical metal band saw
Cutting capacity
height x throat: 175 x 310 mm
Cutting speed: 20 - 90 m/min
Working range
table dimensions: 500 x 400 mm
Table adjustment: 15 °
Table height: 890 mm
Drive power
motor power main drive: 0,4 kW
grinding motor power: 0,09 kW
Piw3n
Sheet welding device power: 2,4 kVA
Supply voltage: 400 V
Dimensions and weight
blade length: 2520 mm
blade width: 3 - 16 mm
dimensions: 355 x 630 x 1560 mm
Weight: 225 kg
Metal band saw blade, band saw blade, metal saw band
-Metal saw band: SG 2/3P x 0.9 unused
Wawcwpur
-Length: 4115 mm
-Weight: 1.2 kg
neu
ca. 10 Wochen ab Auftrags
Italien
8400
159.6
3270x27x0,9 mm
35/70 m/min
300 mm
240 mm
420x200 mm
rund 240 mm, quadrat 230
rund 170 mm, quadrat 170
830 mm
0,9/1,5 kW
1650 mm
1200 mm
1900 mm
400 kg
hydraulicvice
saw beam moves up and down by hydraulic cylinder
fast descent
automatic fast up/down conrolled by feeler pin
adjustable pressure according to section and type of material
double safety buton for cycle start
2 speeds
coolant equipment
_CUTTING CYCLE_
Bwwz...
cutting diameter 350 mm
saw band length 4640 x 34 x 1,1 mm
cutting width 350 mm
Control NC 5.0
band speed 15 - 100 m/min
capacity 90 degrees: square 350 x 350 mm
table height 860 mm
total power requirement 4 kW
weight of the machine ca. 2,8 t
dimensions of the machine ca. 3,1 x 2,2 x 2,2 m
Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column design
for 0 ° cuts on solid material and profiles made of steel, stainless steel and
Gxlnzw
steel alloys
up to a maximum of 350x35...
Präzisions-Holzbandsäge
exhibition machine - new -
manufactured by Holzkraft
type HBS 533 S SET
- Schweright hand profile-version with hohem proper weight
for maximale Laufruhe
- Ruhiger and präziser Lon dank verwindungsfreiem
Maschinengehäuse
- Großdimensionierter Grauguss-Sägetisch aus
einem piece, tiltable from 0° to + 45° with
geschliffener and polierter Oberfläche
- Großer Guss-rip fence
- Schnelle and präzise Schnitthöhenverstellung about
hand wheel and toothed rack with Millimeters...
roll diameter 320 mm
throat 260/310 mm
workpiece height 210 mm
saw band length 2530/2650 mm
width of saw-band max. 13 mm
table-size 500 x 500 mm
table load 0,1 t
work height max. 945 mm
total power requirement 1,3 kW
weight of the machine ca. 0,47 t
dimensions of the machine ca. BTH 800x700x1700 mm
Machine comes from a school.
- including work light
- Including operating instructions
R37mck8m
4
Automatic band saw
Manufacturer: Amada
Type: HA 250 W
Edpcm2ve
Year of manufacture:1998
Cutting capacity: Ø 250 mm
cutting capacity: H 250 x W 300 mm
bundle cut min. WxH: 100 x 50 mm
bundle cut max. WxH: 200 x 150 mm
saw band dimension: 34 x 1,1 x 3.505 mm
space requirement: 1.946 x 1.772 x 2.370 mm
weight: 1.600 kg
Clamping device for automatic band saw, saw band rollers, saw band guide
Bqjwnubaml
-Saw band guide, from automatic band saw Behringer HBP
-Price: complete
-Dimensions: 460/70/H505 mm
-Weight: 28.6 kg
neu
ca. 10 Wochen ab Auftrags
Italien
7550
143.45
3010x27x0,9 mm
35/70 m/min
260 mm
240 mm
330x120 mm
rund 200 mm, quadrat 190
rund 120 mm, quadrat 115
830 mm
0,9/1,5 kW
1600 mm
1200 mm
1800 mm
390 kg
hydraulicvice
saw beam moves up and down by hydraulic cylinder
fast descent
automatic fast up/down conrolled by feeler pin
adjustable pressure according to section and type of material
double safety buton for cycle start
2 speeds
coolant equipment
Escvrw0f
_CUTTING C...
cutting diameter 560 mm
saw band length 8020 mm
cutting width 1,1 mm
capacity 90 degrees: round 560 mm
capacity 90 degrees: square 560 x 560 mm
dimensions of saw-band 8020 x 1,1 x 54 mm
feed length 550 mm
feed length: multiple 9999 mm
cutting speed 17 - 127 m/min
control CEB, SAW III
Nlo0r
total power requirement 7,5 kW
weight of the machine ca. 7,6 t
range L-W-H 4,30 x 2,40 x 2,56 m
acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant
Description:
The machine is fully equipped with upper and lower special roller guides, with mechanical height adjustment of the guide rod, swiveling table, vulcanized band saw wheels, motor protection switch and suction nozzle. It is not for nothing that the HEMA Garant band saw machine is based on the experience and service of the leading German manufacturer of band saw machines.
Series accessories:
Limit switch secured protective doors
Swiveling table
attack
Motor protection ...
We carry the entire MEP range.
! You tell us your saw task and we will find your perfect machine!
Manual band saws for miter cuts from 0 ° to 60 ° left are also available in a version with HB device and allow an aufsichtslosen mode, as well as manual cutting (model 211 1 is the HB)
Device in three-phase version only available) HB-cut cycle-after the cut material is correctly positioned and the vise closed, the cutting process begins.
The cutting speed is controlled by the weight of the saw arm...
cutting thickness adjustment for reversal of re-saw/center-cut, wheel-Ø 1.250 mm, wheel width 148 mm, max. saw blade width 160 mm, saw motor capacity 22 kW/ 380 V, cutting height max. 550 mm, opening width for center-cut max. 350 mm, feed drive stepless variable 6 - 45 m/min, weight 4.500 kg, hydraulic pressure for the feed roller
Lhwsz
Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, material positioning, band saw rollers
-Band saw rolls: 2 pieces, from automatic band saw Behringer HBP 360 A
-Measurements: see photos
Bqgtw3csve
-Price: complete
-Dimensions: Ø 565 mm
-Weight: 91 kg
neu
ca. 10 Wochen ab Auftrags
Türkei
27800
514.3
4380x34x1,1 mm
20-100 m/min
325 mm
315 mm
400x315 mm
rund 325 mm, quadrat 315
rund 300 mm, quadrat 300
655 mm
0.12 kW
1.1 kW
2.2 kW
2130 mm
2150 mm
1650 mm
1860 kg
NC control
double column band saw
3° cutting angle
blade brush
control panel
hydraulic feeding vice
hydraulic vice
hydromechanical blade tension
Erxbt2m8
inverter
linear way
optical height adjustment
proximity switch for sensing blade slippage
material l...
cutting diameter 420 mm
saw band length 6300 mm
cutting speed 20-130 m/min
cutting width at rectangle material 420x420 mm
cutting pressure einstellbar
Bd7eaqy90
chip conveyor
weight of the machine ca. 3 t
feeds slides 7mm Rollenbahn
Control
total power requirement 8 kW
cleaned, function tested, test run
Machine compl. adjusted
used
manufactured by NRA
type 700
Masch.-No. 15590
wheel diameter 700 mm
blade length 5000 mm
Buu3bhvxig
cut height ca. 380 mm
cut width ca. 650 mm
upper guiding
lower guiding
brake mechanical switchable
table tiltable
rip fence
motor 3 kW
exhaust connection D 100 mm
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck -
Available optionally with pneumatic Vice.
Upon request, we provide individual roller rail systems!
Manual cutting cycle
AUTOMATIC cutting: (switch) with stepless lowering speed and adjusting the cutting pressure via spring settings
Sturdy, torsion resistant and low-vibration saw frame made of cast steel
Large, easily adjustable, and bearing rotary table, mid salmon bolt centered turntable with indexing at 0 ° / 45° / 60° and internal table clamp for angle
Vice with quick adjustment
Tungste...
for leveling of band saw blades until 300 mm width and 6 - 12 m length, incl. electronic messure systeme and 2 pair pneumatic leveling rollers, incl. automatic controll of the tracking way
Xlt7vgrt
Metal band saw blade, band saw blade, metal saw band
-Manufacturer: Wespa Bitec Plus metal saw band unused
-Dimension: 4250x34x1.10 mm 4/6
Cvlifmt3
-Number: 5x sheets available
-Price: per piece
-Weight: 1.3 kg/piece
neu
2018
1
6144
Italien
12300
10900
203.83
3010x27x0,9 mm
35/70 m/min
260 mm
240 mm
330x120 mm
rund 200 mm, quadrat 190
rund 120 mm, quadrat 115
835 mm
0,9/1,5 kW
3220 mm
1950 mm
1900 mm
1090 kg
automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp
automatic feed 600 mm/stroke,
adjustment by handwheel, counter and limitswitch
Bwwzo7exwi
variable cutting pressure.
Mach...
6
2.500 €
Bidding plus VAT
21 days left
21 days left
max. sawing range: 335 mm, with roller infeed and outfeed, hydraulic clamping, protective grid enclosure and chip conveyor
Bw0wocw8vt
- new -
manufactured by Holzkraft
type HBS 633 S SET
Description:
- Heavy profile design with high dead weight
For maximum running
- Quiet and precise running thanks to torsion-free
Machine housing
- Large-scale gray cast saw table
One piece, tiltable from 0 ° to + 45 ° with
Polished and polished surface
- Large cast parallel connection
- Quick and precise cutting height adjustment
Hand wheel and rack with millimeter scale
- Standard with angle stop
- Precision 3-roll saw blade guide with...
with additional automatic saw arc suppression
for 45 ° right up to 60 ° left miter cuts
Cutting capacity 90 ° round: 225 mm
Section 45° right: 145 mm
Cutting capacity 45 ° left: 160 mm
Cutting capacity: 60 ° left: 90 mm
Engine: 0.7 / 0.81 kW
Cutting speed: 46 / 92 m / min
Blade: 2450 x 27 x 0,9 mm
Weight: 240 kg
---
!!! Not the right machine found? Tell us your production task and we will help!
Dvwdri
---
Used Band resaw
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
