Used Barford Sxr 6000 for sale (2,080)

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) Lsdpfx Aqjy Rnp Iovshg + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Condition: excellent (used), functionality: fully functional, power: 56 kW (76.14 HP), fuel type: diesel, operation weight: 18,000 kg, Year of construction: 2021, operating hours: 350 h, Feed hopper volume: 5 m³ Operating position dimensions: 11,444 x 10,576 mm (LxW) Engine type / power: Catertpillar 4.4 / 56 kW Screen box: 3,660 x 1,280 mm (LxW) Weight: 18,000 kg Throughput: approx. 400 t/h Lhodpsrh E Evefx Aqvjg

Condition: new, Year of construction: 2024, Conveyor belt: hydraulic folding in and out Scraper: front and rear scraper Conveyor belt length: 25.000 mm Engine: Caterpillar 4.4 Fixid Speed Engine 133 HP Ledjikqxtopfx Aqvshg Crawler track: floor plates 400 mm Discharge height 22,5° / 27,5°: 8.8200 / 11.000 mm Conveyor belt width: 1.200 mm Feed hopper: Capacity 8 m³

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Engine manufacturer: Cat C2.8 Lhedoyw Hluspfx Aqvog Operating weight: 18,999 kg Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Engine power: 55 kW Throughput: approx. 700 t/h

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Clemco blasting pot (used), 100 liters Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours. Lhedpfox Ai Hpox Aqvog

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: KE-TR6536-C-A-442, Stockpile conveyor for direct feeding via crushing / screening plant. TECHNICAL DETAILS stockpile capacity: up to 300 t/h at an angle of repose of 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Ljdomv E Igepfx Aqvohg Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2022, operating hours: 0 h, condition: new, functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Ljdpfx Ajpdqr Eeqvehg Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,817 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, punching force: 22 t, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser on hours: 71,637 h Operating hours: 80,188 h EQUIPMENT - Sturdy C-frame - Linear guide with integrated magazine - Maintenance-free three-phase servo motors - Programmable hold-down for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser station - Ejector cylinder at the laser chute Lhodpfsy Iz H Iox Aqvjg - Programmable cutting gas pressure control - Laser cutting head: 5'' lens, quick-change system, height control - Multi-beam light barriers - Quick shut-off hydraulics - Extraction system - Compact dust extractor - Protective device against stray radiation at the cutting head - Brush table - Sign function / rapid beading - Softpunch - Small parts blow-out device - Repositioning cylinder - Warp detection - Chip conveyor

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us. Ledpfjw U A Rmox Aqvjhg

Condition: new, Year of construction: 2026, saw blade diameter: 350 mm, cutting range round steel at 90°: 90 mm, cutting range round steel at 45°: 80 mm, rotational speed (max.): 100 rpm, warranty duration: 12 months, saw blade speed: 100 rpm, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 90 mm, Equipment: cabin, documentation/manual, rotational speed infinitely variable, Fully Automatic Magazine-Type Mitre Tube and Profile Cutting Saw Machine General Description The fully automatic magazine-type mitre tube and profile cutting saw machine is designed for precise and high-speed cutting of round tubes, square, and rectangular profiles at 90° and ±45° / ±60° angles in industrial production lines. Lhedpfjyg H Rnjx Aqvsg With servo motor-controlled automatic angle rotation, PLC-controlled colour touch screen, and a patented anti-vibration cutting system, it delivers high cutting quality, long saw blade life, and repeatable precision. Key Features • Fully automatic magazine-type mitre tube and profile cutting saw machine • Servo motor-controlled automatic angle rotation up to ±60° • PLC-controlled colour touch screen • Servo motor and ball screw-driven material feeding system • Vertical cutting system with servo motor and ball screw movement, operating on a linear guide • Variable cutting speeds: - Slow at material entry - Fast during cutting - Slow at exit • Patented system that eliminates saw blade backlash: - Eliminates vibration and resonance - Prevents saw blade breakage - Extends blade life • Inverter-controlled saw speed between 20 – 80 rpm • Servo motor-controlled material feed and stop system • Ability to perform up to 10 different length cuts on the same material • ±0.2 mm length accuracy (may vary depending on saw blade runout) Cutting Capacity (Tube & Profile) Maximum Saw Blade Diameter: 350 mm Cutting Angles & Capacities Angle | Round Tube (max.) | Square Profile (max.) | Rectangular Profile (max.) -----|-----|-----|----- 90° | Ø 90 mm | 90 × 90 mm | 100 × 80 mm ±45° | Ø 80 mm | 80 × 80 mm | 100 × 40 mm ±60° | Ø 50 mm | 50 × 50 mm | 50 × 50 mm Minimum Final Scrap Length: 290 mm Technical Specifications • Main Voltage: 400 V • Control Voltage: 24 V • Installed Power: 8.7 kW • Current: 31.8 A • Saw Motor: 4 kW • Coolant Pump: 0.09 kW • Air Pressure: 6 kg/cm² (240 l/min) • Saw Speed: 20 – 80 rpm (Inverter controlled) • Angle Rotation: 90° / ±45° / ±60° Saw Blade Specifications • Saw Blade Diameter: 350 mm • Bore Diameter: 32 mm • Pin Holes: 2 × Ø11 Coating Options: • TiN: For medium-hard steels • TiCN: For high rigidity steels • TiAlN: For stainless steels Machine Dimensions & Weight • Width: 7650 mm • Length: 2650 mm • Height: 2150 mm • Net Weight: 3320 kg • Gross Weight: 3350 kg

Condition: new, Year of construction: 2026, saw blade diameter: 350 mm, cutting range round steel at 90°: 90 mm, rotational speed (max.): 100 rpm, cutting range square steel at 90°: 80 mm, Equipment: cabin, documentation/manual, rotational speed infinitely variable, Fully Automatic Magazine Tube and Profile Cutting Saw Machine General Description The fully automatic magazine tube and profile cutting saw machine is designed for industrial production lines to perform cutting operations on round tubes, square, and rectangular profiles. With its PLC-controlled color touchscreen, precision servo-driven feeding system, and patented anti-vibration construction, it offers high accuracy, extended saw blade life, and continuous production performance. The magazine structure and programmable cutting functions allow cutting at different lengths on the same material, minimizing operator dependency. Key Features - Fully automatic magazine tube and profile cutting saw machine - PLC-controlled color touchscreen - Material feeding system controlled by servo motor and ball screw - Vertical cutting system moving on a linear rail, driven by servo motor and ball screw - Variable cutting speeds: - Slow on material entry - Fast during cutting Lhsdpfx Aqsyg H Nqevsg - Slow again on exit - Patented system eliminating saw blade backlash: - Eliminates vibration and resonance - Prevents saw blade breakage - Extends saw blade life - Saw speed variable between 20 – 100 rpm (inverter controlled) - Single-stroke feeding and cutting up to 1000 mm - Ability to cut up to 10 different lengths on the same material - High-performance gearbox suitable for continuous operation - Length accuracy of ±0.2 mm (may vary depending on the runout of the saw blade) Cutting Capacity (Tube & Profile) - Maximum saw blade diameter: 350 mm - Cutting angle: 90° Round Tube: - Min. Ø15 mm – Max. Ø90 mm Square Profile: - Min. 15 × 15 mm – Max. 80 × 80 mm Rectangular Profile: - Min. 15 × 15 mm – Max. 80 × 80 mm - Minimum Remnant Length: 120 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 7.64 kW - Current: 26.6 A - Saw motor: 4 kW - Cooling oil pump: 0.09 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 20 – 100 rpm (inverter controlled) - Cutting Angle Rotation: 90° Saw Blade Specifications - Saw Blade Diameter: 350 mm - Bore Diameter: 32 mm - Pin Holes: 2 × Ø11 - Coating Options: - TiN: Medium hardness steels - TiCN: High rigidity steels - TiAlN: Stainless steels Machine Dimensions & Weight - Width: 8800 mm - Depth: 2300 mm - Height: 2020 mm - Net Weight: 2750 kg - Gross Weight: 2790 kg

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A Lhsdpfsvwgl Ajx Aqvjg - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Working range laser: 3050 x 1550 x 270 mm positioning speed X/Y/Z: 90 m / min simultanious: 120 m / min Max. workpiece weight: 1000 kg Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Max. brass: 14 mm Length: 10050 mm Lhodpfx Aqjxq Rczsvsg Width: 5100 mm Height: 2600 mm Machine weight: 8100 kg Electrical connected load: 54 kW

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price on request. The price is ex stock 33106 Paderborn! Bulk discounts available for the purchase of multiple containers. *Leasing/hire purchase available.* 3 pcs. 6000 mm immediately available from stock, RAL 7043 2 pcs. 6000 mm available at short notice, RAL color of your choice 2 pcs. 6500 mm immediately available from stock, RAL 7043 2 pcs. 6500 mm available at short notice, RAL color of your choice 7000 mm available in approx. 4 - 6 weeks, RAL color of your choice Other designs and sizes available ex stock Paderborn. Feel free to check our current inventory on our homepage. Roll-off container platforms according to DIN Technical specifications: * Dimensions 6000 mm: 6000 x 2550 mm (internal length) * Dimensions 6500 mm: 6500 x 2550 mm (internal length) * Unladen weight 6000 mm: 1,720 kg * Unladen weight 6500 mm: 1,807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 Lhodpfjy Tl Utjx Aqvsg * 5 mm S 235 checker plate floor * Includes 8 lashing rings in the floor plate, loadable up to 2.5 t each * Front wall height 1,500 mm * Hook Ø 50 mm S355 * According to DIN 30722, incl. inspection as per DGUV Regulation 114-010 * Steel roller 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and finished with synthetic resin paint * Permissible total weight 15,000 kg Subject to errors and prior sale. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. If you have any questions, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,590 mm, travel distance Y-axis: 1,725 mm, overall weight: 14,000 kg, number of axes: 2, CNC punching machine manufactured in 2001. This Pullmax 6000 features a maximum sheet size of 3000 × 1500 mm and a maximum punching force of 300 kN. It has a tool capacity of 15 positions and a maximum tool diameter of 76.2 mm. If you are looking to get high-quality punching capabilities, consider the Pullmax 6000 machine we have for sale. Contact us for further details. • Max sheet size: 3000 × 1500 mm • Max sheet size (without repositioning): 2500 × 1500 mm • Min sheet thickness: 0.7 mm • Tool capacity: 15 positions • Max tool diameter: 76.2 mm • Table speed (X/Y): 80 / 80 m/min • Positioning accuracy: ±0.1 mm • Repeatability: ±0.03 mm Lhjdpfx Aoy Alc Aeqveg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,260 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,720 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, front guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2017 | 4,260 MTH | GAS | TRIPLEX 6,000 mm | SIDE SHIFT | FORK POSITIONER Ready for operation from day one – no capital outlay, no risk ⚙️ Why choose this forklift? 🚀 Are you looking for a machine that will keep your operations running smoothly? This COMBILIFT CB2500 is a proven unit, fully serviced and ready to work right away, with no hidden fees. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,260 operating hours – genuinely well-maintained ✔ New tyres – no extra investment required Key specifications 📊 Capacity: 2,500 kg Power: GAS ⛽ Mast: Triplex – 6,000 mm Fork positioner: 1,400 mm Fork length: 1,200 mm Cab: Open (overhead guard and front protection) Full technical specification 🔧 General data: Year of manufacture: 2017 Operating hours: 4,260 MTH Rated capacity: 2,500 kg Load centre: 600 mm Truck weight: 6,300 kg Mast and lifting: Mast type: Triplex Lift height: 6,000 mm Forks and attachments: Fork positioner: 1,400 mm Fork length: 1,200 mm Dimensions: Height: 2,250 mm Length: 1,550 mm Width: 1,500 mm Overall height: 2,250 mm Chassis: Tyres: superelastic (100%) – brand new Front: 16 x 7 x 10 1/2 Rear: 22 x 10 x 16 Equipment: Open cabin Fork positioner Side shift Free lift Condition: Technical: 5/5 – fully serviced Aesthetic: refurbished, like new, no corrosion Ideal for: 🏭 ✔ Narrow aisle warehouses ✔ Timber, steel and pipe handling ✔ Efficient long load handling ✔ Indoor and outdoor use What you’re buying 💡 You’re not buying a typical “used forklift”. You’re purchasing a fully prepared and tested machine: ✔ Each unit goes through a thorough test prior to sale ✔ Ready for immediate deployment ✔ Live online demonstration available 🎥 ✔ Direct delivery to your location 🚛 Delivery and service 🌍 • Transport throughout Europe • Comprehensive logistics support Ljdpfx Aqoy T Rzfjvshg • Assistance with leasing/financing • Dedicated after-sales support Why FT LOGISTICS? 🤝 We don’t just deliver forklifts – we deliver solutions that keep you working. ✔ Over 100 units in stock ✔ In-house servicing and preparation ✔ Proven track record across Europe ✔ Hundreds of satisfied customers Contact us today 📞 FT LOGISTICS – Quality you can count on. Service you can trust.

Condition: reconditioned (used), Year of construction: 2006, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 15 rpm, table width: 1,200 mm, table length: 6,000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Lateral (Z): mm 1,000 Work table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on the table surface: pieces 12 Width of T-slots: mm 22 Distance between slots: mm 100 Max. workpiece weight: kg 13,500 NC rotary table: Position: Right, flush integrated into the table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Lhedpoy Tkgbofx Aqvog Max. workpiece weight: kg 3,500 Number of T-slots: pieces 9 Size of T-slots: mm 22 Distance of T-slots: mm 100 Paint finish: RAL 7035 light gray / RAL 5011 steel blue Tool interface: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% ED KW28 Spindle speed range: Spindle speed: min-1 15 - 5,000 Torque: Nm 815 Feeds: X, Y and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Overall height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal Automatic tool changer Chip conveyor Coolant system with 70 bar & (IKZ) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: good (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, 2019 HELLER H6000 CNC Double-Pallet Horizontal Machining Center CNC horizontal machining center with double pallet Low operating hours, single-shift machine, excellent condition Manufacturer: HELLER Model: H6000 Year of manufacture: 2019 Machine type: CNC horizontal machining center Pallet system: Double pallet / 2-pallet system Serial number: MXXXXX (upon request) Pallet size: 630 x 630 mm Maximum pallet load: 1,000 kg Maximum workpiece height: 1,200 mm Travel distances: X-axis: 1,000 mm Y-axis: 1,000 mm Lhjdpfsy S S Hyjx Aqvjg Z-axis: 1,000 mm B-axis: 360° / 0.001° indexing Rapid traverse speeds: X-axis: 50,000 mm/min Y-axis: 50,000 mm/min Z-axis: 75,000 mm/min B-axis: 25 rpm Feed forces: X-axis / Y-axis: 15,000 N at 40% duty cycle Z-axis: 20,000 N at 40% duty cycle Spindle speed range: 5 – 6,000 rpm Spindle drive power: 60 kW at S6 / 40% duty cycle Maximum spindle torque: 2,292 Nm at S6 / 40% duty cycle Spindle taper: HSK 100A Automatic tool changer: 50 positions Maximum tool diameter: 280 mm Maximum tool length: 600 mm Maximum tool weight: 25 kg Condition: The machine is in top condition, has low operating hours, and can be inspected immediately. The machine is available for short-term delivery.

Condition: used, Year of construction: 2007, Perfect binding line Wohlenberg City E-6000 (edition 6000) Year: 2007 Consisting of Book block feeder Solema Fastbook Gathering machine Wohlenberg Sprinter E Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST - Opticontrol OSC 1-1 - Winjector vacuum system - Set up element - Criss cross delivery - Transfer into the binder Perfect binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touch screen - Number of clamps: 15 - Milling and roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Front cutter: VSS - Hotmelt spine glue unit with integrated pre-melter Lhodpfsy Tvyyjx Aqvsg - Hotmelt side glue unit with integrated pre-melter - PUR spine gluing unit - Rotary cover feeder - Scoring station - First nipping and pressing station - Second nipping and pressing station - Lay down device (to the left) Transport system Description: - Transport system, length (approx): 50 mtr - Escape delivery Three knife trimmer Müller Martini Merit S Year: 1997 Description: - Right hand infeed - Automatic hopper feeder for inline production - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Rima RS-3310S Year: 2007 - Delivery to the right

Condition: new, plate depth 6000 mm plate width 1100 mm plate height 200 mm weight of the machine ca. 4100 kg required space 6000 x 1100 x 200 mm GERD WOLFF clamping plate 6000 x 1100 x 200 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 42 x 22 mm T-slot spacing: 200 mm Number of slots: 5 Edge distance: 125 mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Lhsdpsy S Dnvjfx Aqvjg Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine designed for precise sheet metal processing. The MTP F-6000 combines a robust machine structure with high-quality components, ensuring excellent cutting quality, high working speed, and long service life. The machine is equipped with a 6000W laser source, an auto-focus cutting head, and a CNC control system. It is ideal for production plants, metal processing companies, and industrial workshops. The heat-treated frame structure ensures resistance to deformation and long-term precision. Key features: 6000W laser source Auto-focus cutting head CNC control system Linear guides Helical rack drive Rigid machine construction Automatic lubrication system Water cooling system Protective enclosure Advantages: High efficiency and cutting speed Excellent edge quality Low operating costs Easy operation Reliable continuous operation Applications: Steel structures production Sheet metal processing Automotive industry HVAC and ventilation Production of enclosures and metal parts Technical data: Model: MTP F-6000 Working area: 3000 × 1500 mm Laser power: 6000 W Cutting head: Auto Focus Control system: CNC Drive: Servo drives Guides: Linear Transmission: Helical rack Cooling: Water cooling system Lubrication: Automatic Construction: Welded, heat-treated frame Cutting capacity (6000W): Mild steel: up to approx. 25 mm Stainless steel: up to approx. 16 mm Aluminium: up to approx. 14 mm Standard equipment: 6000W laser source Auto-focus cutting head CNC control system Chiller Extraction system Working table Protective enclosure Optional equipment: Lhjdoyv Dx Aepfx Aqvog Air compressor Dust extraction system Exchange table

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,260 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 1,720 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,600 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, front guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2017 | 4,260 MTH | GAS | TRIPLEX 6,000 mm | SIDE SHIFT | FORK POSITIONER Ready for operation from day one – no capital outlay, no risk ⚙️ Why choose this forklift? 🚀 Are you looking for a machine that will keep your operations running smoothly? This COMBILIFT CB2500 is a proven unit, fully serviced and ready to work right away, with no hidden fees. ✔ Fully serviced (oils, filters, comprehensive inspection of all components) ✔ Technical and visual condition: like new ✔ Only 4,260 operating hours – genuinely well-maintained ✔ New tyres – no extra investment required Key specifications 📊 Capacity: 2,500 kg Power: GAS ⛽ Mast: Triplex – 6,000 mm Fork positioner: 1,400 mm Fork length: 1,200 mm Cab: Open (overhead guard and front protection) Full technical specification 🔧 General data: Ledpsy Tcb Rjfx Aqvohg Year of manufacture: 2017 Operating hours: 4,260 MTH Rated capacity: 2,500 kg Load centre: 600 mm Truck weight: 6,300 kg Mast and lifting: Mast type: Triplex Lift height: 6,000 mm Forks and attachments: Fork positioner: 1,400 mm Fork length: 1,200 mm Dimensions: Height: 2,250 mm Length: 1,550 mm Width: 1,500 mm Overall height: 2,250 mm Chassis: Tyres: superelastic (100%) – brand new Front: 16 x 7 x 10 1/2 Rear: 22 x 10 x 16 Equipment: Open cabin Fork positioner Side shift Free lift Condition: Technical: 5/5 – fully serviced Aesthetic: refurbished, like new, no corrosion Ideal for: 🏭 ✔ Narrow aisle warehouses ✔ Timber, steel and pipe handling ✔ Efficient long load handling ✔ Indoor and outdoor use What you’re buying 💡 You’re not buying a typical “used forklift”. You’re purchasing a fully prepared and tested machine: ✔ Each unit goes through a thorough test prior to sale ✔ Ready for immediate deployment ✔ Live online demonstration available 🎥 ✔ Direct delivery to your location 🚛 Delivery and service 🌍 • Transport throughout Europe • Comprehensive logistics support • Assistance with leasing/financing • Dedicated after-sales support Why FT LOGISTICS? 🤝 We don’t just deliver forklifts – we deliver solutions that keep you working. ✔ Over 100 units in stock ✔ In-house servicing and preparation ✔ Proven track record across Europe ✔ Hundreds of satisfied customers Contact us today 📞 FT LOGISTICS – Quality you can count on. Service you can trust.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Lhsdpsy Shc Dofx Aqvjg

Condition: good (used), Year of construction: 2012, TruBend 5050 Ljdsy Shcdepfx Aqvshg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,274 h, load capacity: 4,500 kg, lifting height: 6,000 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,770 mm, motor manufacturer: Kubota, fork length: 1,300 mm, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27x10-12, overall weight: 6,600 kg, empty load weight: 6,600 kg, total height: 2,770 mm, total length: 2,600 mm, total width: 2,320 mm, maximum load weight: 4,500 kg, fuel: diesel, Equipment: adjustable boom, cabin, lighting, pallet forks, Positioner + sideshift Ljdpfx Aqey Tnkqevehg Air condition Combilift is in perfect condition. We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.