2
used
type pressure bar planer head
Tragkörper aus aluminium
mech. feeder
flight circle diameter 127 mm
internal diameter 35 mm
Schneidenbreite 240 mm
Schneidenanzahl 4 pc.
original price 624,- ?
Ok7c2
located in 97447 Gerolzhofen
5
Working width:410 mm
Length of the planing table:2610 mm
Cutterblock diameter:120 mm
Edknrv
Number of knives:4 St.
Knives type:TERSA
:5000 U/min
Motor output:5,5 kW
Dimensions (L/W/H):2650x800x1000 mm
weight of the machine ca.:600 kg
4
Planer-thicknesser Holzkraft FS 30 Classic Tersa
with Tersa cutterblock and planing knives - quick change system
Tersa planing knife system enables knife change in seconds and particularly quiet operation
Skew toothed steel infeed roller for constant and uniform wood infeed
Extra long planing tables
Large dressing fence can remain in position when opening the dressing tables.
Rear opening dressing tables
High machine weight
Powerful industrial motor
Robust cast steel construction
Total length ...
3
FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives
With TERSA cutterblock for changing planing knives in seconds
TERSA planing knife system enables particularly quiet running
Skew toothed steel infeed roller for constant and uniform wood infeed
The extra long dressing tables made of one piece allow easy dressing of the workpieces
Large dressing fence can remain in position when opening the dressing tables
Rear opening dressing tables
The high machine weig...
6
CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment
Sturdy cast iron construction
Large, ribbed planing tables made of grey cast iron, annealed against distortion
Smooth running due to high dead weight
Four feed speeds
Motorized thicknessing table stroke with two speeds and digital display
Link pressure shoes in the infeed
4-blade shaft, precision bearing mounted
Sharp toothed steel feed roller for particularly even and gentle wood feed
Extrac...
8
Surface planer
minimax fs 41es TERSA
Maximum equipment for the professional.
Part number
Cgiptddi
5503431
Brand
Holzkraft / SCM
Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods
Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running
Material feed with two speeds
Particularly long dressing t...
13
IVECO Daily 50C18 Euro 6
2998ccm - 180hp
MANUAL gearbox
Elevator BAR 1000 kg
Wheelbase 4750 mm
Body length 4950 mm
Body width 2250 mm
Celncnjzpg
Build/side height 2400 mm
Date of 1st registration 16-09-2020
Year of production 2020
JEGGER body
Equipment package BUSINESS PREMIUM
4
Pneumatic cylinder, compact cylinder
Dwlsx3
-bar Dattenberg: SZD -50/50
-Stroke: 50 mm
-Piston rod: Ø 16 mm
-Dimensions: 60/60/H185 mm
-Weight: 1.1 kg
7
Capacity: 80 m/min
Po382
Planer feed table, tested. At speeds up to 80 m/min.
7
Fuel type Remaining
used tail lift
Manufacturer: BÄR Cargolift
Type: BC 1000S4
Nominal load: 1000 kg
7ciiiq8n
Operating pressure: 230 bar
dimension tailgate: approx. 1,8 x 2,5 m
Year of manufacture: 2008
Condition for the conclusion of the purchase is a business/commercial activity of the buyer and the corresponding proof. Please send us a proof of your business/trade activity (e.g. sales tax identification number, trade licence or association or chamber identity card) after completion of the pu...
6
New ROOF CLEANER WITH SIDE AND HEIGHT ADJUSTMENT MOS ART. NO. 80,662"
Roof cleaner with side and height adjustment MOS Art. No. 80.662
Roof cleaner with side and height adjustment
DR-520 G1/4 inch IT 500bar
Cguak98t8z
new
Bought a year ago at gg-ersatzteile
8
Varimixer planetary mixer
Model: AR 80 MK-III
Power adjustment stepless
Intervention - protective grid
LED control with timer
MK-III control panel
1 stainless steel boiler 80 liters
1 broom, 1 dough hook, 1 flat beater
Mixing machine with tank car
standing machine
Boiler lift electric
with A and B equipment (small boiler+tools)
DGUV V3 tested
with emergency stop
Connection 400V, 4 kW, 16A-CEE plug
Used machine overhauled
with 6 months warranty
Ca8jdgfq0c
Visit our large sales warehouse with ov...
6
Planetary machine Baer
- used
- for 60 beds
- 1 boiler
- 3 tools
- checked and cleaned
- technically good
F0z2gphak
- ex stock
- price 2.700 €
4
Pneumatic cylinder, compact cylinder
-bar: SZD-32/50
-Stroke: 50 mm
Ebfktvr
-Piston rod: Ø 12 mm
-Dimensions: 40/40/H165 mm
-Weight: 0.5 kg
8
Description
Technical data
Scope of delivery
Accessories
Equipment options
Ideal for demanding craftsmen and carpenters
The extra long dressing tables in one piece allow easy dressing of the workpieces
Worktables are made of grey cast iron, therefore insensitive and permanently flat
Backward opening dressing tables with tension spring support for fast and convenient changeover
Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which ...
3
Fuel type Remaining
VAT must be paid as a deposit when exporting outside the EU, ALL DATA WITHOUT GUARANTEE, INTERMEDIATE SALE + IRRORTIUM FORWARDED -
Condition for the conclusion of the purchase is a business/commercial activity of the buyer and its corresponding proof. Please send us a proof of your business/trade activity (e.g. VAT identification number, trade license or association or chamber card) after completion of the purchase process. Shipment/delivery will only take place after proof o...
6
Guarantee in months: 12
Scope of delivery: with mounting and adjusting instruction
Current: 5 A
Product condition: New from old Stock
Traces of use: none
Manufacturer: Bar
Protection Class (IP): IP67
Temperature: -20 - +70°C
Qnfnp
Voltage: max. 250 V/AC
Item No.: 62952000
3
Pneumatic cylinder BAR type SZD-32/100,
available: 3,
Price per piece: 25,00 € + VAT.
B3yzx3tojz
15
A used compressed air refrigeration dryer.
The refrigerant dryer was checked for function by refrigeration engineers before being taken out of service.
Afterwards it has sucked off the 18 kg refrigerant R22 (2 bottles) and disposed of it. All protocols available.
A small amount of nitrogen was then added.
Gladly we can let you fill the dryer with new refrigerant (for example R407C).
!! Sales price is without refrigerant !!
Manufacturer: Sabroe
Model: SV 1010 AB
Type: 50 A
max. volume flow: 55m³/...
5
Solenoid valve, directional valve, valve terminal, control valve
Bkv0bkpbne
-Manufacturer: bar, solenoid valve type NM-321-H
-Magnet coil: MA 22
-Price per piece
-Number: 3 Stück
-Dimensions: 135/72/H22 mm
-Weight: 0.3 kg/piece
Planten stirring machine Baer
vessel size: 80 litres
with electric lifting device
B3vmnut
Control system:
Digital control with the following functions:
10 stepless speed
timer
up/down operation (boiler)
pause button
machine in top condition
in addition:
Mechanical lifting tipper in chrome steel
4
Bear cooling lubricant plant scraper conveyor BJ 88 with centrifugal pump for 1200l/min ,with overlying magnetic separator Liqui Filter BJ 2013 for 1300l/min
B8qv38rvb2
15
15
1
Motorized thicknessing table stroke with two speeds
Numerical display for working height
Grey cast iron thicknessing table
The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision
Four feed speeds
Optional with two rollers in the thicknessing table
Noise and chip protection curtain at workpiece infeed and outfeed as standard
Adjustable roller contact pressure
Front infeed roller with helical toothing
Pull-out roller with rubber coating
Power...
3
x-travel:3200 mm
y-travel:2000 mm
z-travel:1000 mm
distance spindle nose and table:200-1200 mm
distance between columns:1820 mm
table-size:3200×1600 mm
table load:10 t
T-slot (width-distance-quantity):22x180x8 mm
spindle cone:50 BT
spindle speed:6000 (Direktantrieb) 1/min
spindle drive:22 kW
Spindle motor torque:689/1692
Pzsf7
rapid traverse in x-y-z axis:20/20/12 m/min
feeds:1~10000 mm/min
Tool changer:Vorbereitung für WZW
workpiece length:350 mm
tool diameter:110/225 mm
weight of tools max.:...
10
lathe and milling cnc with bar feeder
Y-axis Travel -100mm
12-station base mount turret (BMT65)
Medium footprint
Made in the USA
Location - Israel
Hd8uwxh0y
This machine under power and ready to inspect .
fees 3%
8
SCM Sintex four-sided planer
Planing width: 180 mm
Planing height: 100 mm
Diameter of the spindles: 35 mm
Number of spindles: 4
X9l2l922
2 feed speeds
Order of spindles: bottom, right, left, top
Motor power of vertical spindles: 5.5 kW
Motor power of horizontal spindles: 7.5 kW
Feed rate: 0.75 kW
Extraction spigot diameter: 2×120 mm and 1×150 mm
CE certificate
15
* working width 320 mm
* working height 160 mm
* each head started separately, on an independent motor
* motors on vertical spindles - 5.5 kW each
* motors on horizontal spindles - 7.5 kW each
* electronic dimension input
* automatic setting of the side head depending on the width of the element
Cgqxd70jvx
* 4 spindles adjustable in two axes
* vertical heads adjustable up/down and front/back ( as in milling machine ).
* input gears in front of the first head
* pneumatic pressure of pulling rolle...
15
WEINIG Profimat 22n
max planing width 220 mm
max planing height 120 mm
5 spindles
Diameter of spindles 40mm
bottom head 5.5 kW
right and left 5.5 kW
top 5.5 kW
bottom 4 kW
feed motor power: 2,2 kW
smooth feed adjustment: 6-22 m/min
feed on gimbals
lubrication pump for the working table
pneumatic pressure 6 bar
electric lifting of the body motor 0.25 kW
diameter of the extraction stub: 140 mm
Cgwvmrqemf
Efficient and ready to work
Works very quietly, at the highest level.
In very good conditi...
11
heavy planer-profiler WEINIG Profimat 23 - 26 FORTEC
working width 20 - 260 mm
working height 8 - 180 mm
5 working spindles DM 40 mm
working table in infeed ( approx. 1050 mm )
working spindle bottom 11 kW, left + right 11 kW, top 11 kW, plaster bottom 7,5 kW
Pneum. Pressure of the feed rollers
Cardan feed stepless 5 - 24 m/min.
Bohtz2hu
ATS system
Up to 98 workpiece dimensions can be programmed and called up at the touch of a button
Left and upper spindle move auto. to position
Machine in CE ve...
:VM-3225 | VM-4225 | VM-5225
x-travel:3200|4200|5100 mm
y-travel:3000/3400 mm
z-travel:800/1000 mm
distance spindle nose and table:235~1235 mm
distance between columns:2550/3050 mm
table-size:3350x2200|4350x2200|5350x2200 mm
table load:15|18|21 t
T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm
spindle cone:50 BT/SK
spindle speed:6000 (opt.10000, 15000) 1/min
spindle drive:22/26 kW
Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm)
rapid traverse in x-y-z axis:15/18...
9
12-station base mount turret (BMT65)
Medium footprint
Made in the USA
Cgzhetbngp
Location - Israel
This machine under power and ready to inspect .
fees 3%
10
SCM Compact 23S four-sided planer
Maximum planing width 230mm
Maximum planing height 120mm
Spindle arrangement:
Bottom
Right
Left
Top
Universal
Infinitely adjustable feed rate on the variator 4-22m/min
All spindles adjustable vertically and horizontally
Electrical lifting of rollers
Pneumatic rollers pressure
D8joxpx
CE
14
Catalog No. 6789
TECHNICAL DATA
- max width of the workpiece 230mm
- max height of the workpiece 120mm
- number of spindles 4:
1) horizontal bottom 230mm (fixed, not adjustable) 4kW
2) vertical right 120mm
3) vertical left 120mm (2nd and 3rd spindle) 11kW
4) horizontal top 230mm 5.5kW
- 4 spindle electrically adjustable up / down
- spindles 2,3,4 adjustable up/down, right/left
- all spindles equipped with an electric brake
- spindle diameter 40mm
- 4 introductory, toothed, pulling rollers from ...