Used Bar Loader for sale (16,790)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. Rcedpezuxm Asfx Abpof * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. Rcjdpfszuxwusx Abpsf • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Rcjdpfxey D Tn As Abpef

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Rcjdpfezqgikex Abpof Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Rcodpfozf Nb Eex Abpsf

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Rcsdpfx Asx S Rbpebpsf

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or Rcjdpfx Aoy Ndg Hjbpof *

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total width: 1,350 mm, total length: 7,210 mm, overall weight: 4,000 kg, Round bars diam. Min. 15 mm Round bars diam. Max. 80 mm Hexagonal bars key min. 15 mm Hexagonal bars key max. 65 mm Min. bar length 1200 mm Rcodpfx Absvi Eypepsf Max. bar length 6,100 mm Max. feed speed 30 m/min – 500 mm/ sec Max. cut length 300 mm

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Rjdpjy Ax Tusfx Abpscf

Condition: good (used), Year of construction: 1998, Bar feeder Breuning IRCO ILS RBK 7212 Rsdpfey Ez Exex Abpjcf Technical data: Type: ILS RBK 7212 Year of manufacture: 1998 Connection: 400 V Power: 1 kW Material diameter: approx. Ø 12–72 mm Bar length: up to approx. 720 mm (short bar feeder) Automatic feed Scrap piece ejector present Control panel with controller Accessories: Comprehensive set of guide channels (various diameters) Additional pusher rods Documentation available Various spare parts (see photos)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: BM17115077, 🔧 Automatic Bar Feeder – Top Automazioni MA315SX For sale is a fully functional automatic bar feeder from Top Automazioni (Italy), designed for use with CNC lathes. Redex Hgpfepfx Abpocf 🏭 Manufacturer: Top Automazioni 📌 Model: MA315SX 📅 Year of manufacture: 2018 🔢 Serial number: BM17115077 ⚖️ Weight: approx. 500 kg ✅ CE compliant ⚙️ Technical Specifications • Suited for bar material up to 3 meters in length • For bar diameters up to Ø 12 mm • Automatic and stable material feeding for serial production • Robust and proven construction by Top Automazioni 🔌 Machine Integration • The bar feeder was previously connected to a Tsugami CNC sliding headstock lathe • Machine interface and operation were fully functional up to removal ⚡ Electrical Data • Supply voltage: AC 230 V • Frequency: 50 / 60 Hz • Rated current: 7.8 A 🛠️ Condition • Used • Technically flawless / fully functional • Normal wear according to age and prior use 📍 Location • Stuttgart area, Germany 📦 Scope of Delivery • Bar feeder as illustrated • Sold as-is Inspection is possible by arrangement. Further technical information or customized options can be discussed upon serious inquiry.

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Rcsdpfjzk E Irjx Abpef Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Year of construction: 2022, condition: ready for operation (used), Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible. Rjdpewcf R Tefx Abpjcf

Year of construction: 2007, condition: ready for operation (used), An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026. Rodjzgwxzjpfx Abpocf

Year of construction: 2004, condition: good (used), Bar loader magazine: IRCO ILS RBK 10016 Rcjdjzkbtwopfx Abpef Year: 2004 SPECIFICATIONS Bar capacity: 5 - 100 mm Bar : 1200 mm

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Rcedpfx Abszrn Htopjf

Year of construction: 2005, condition: ready for operation (used), Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible. Rjdpowt Tk Nofx Abpecf

Condition: excellent (used), Year of construction: 2008, Max. bar diameter 65 mm Max. bar length 3000 mm Rjdpfxjin Hkmj Abpjcf

Condition: good (used), Bar length up to 1600 mm. Some parts missed. For spare parts. Rcsdpfx Aohvz Hzjbpjf

Condition: used, Year of construction: 2000, bar material dia. 5 - 80 mm Bar length 250 - 1.550 mm bar length 1.550 mm longitudinal feed 600 mm height adjustment 775 - 1.175 mm dimensions of the machine ca. 2,25 x 1,10 x 1,80 m weight of the machine ca. 0,5 t Bar Feeder SAMSYS - Multisam MUS 2000 Rsdpfxjzkvt Eo Abpscf - NOT TESTED - for parts

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Rcsdpfjx Nqi Ijx Abpef Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm maximum bar length: 3300mm

Condition: good (used), Bar length 3000 mm Rcjdpegvz N Ejfx Abpjf Max bar diameter 65 mm Tubes diameters : 65 mm Dimensions 3900 x 1000 x 1200 mm Weight 1000 kg

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm Rcodsp Du Alopfx Abpjf

Condition: good (used), For 5 meters bars Rcedpegvz Nhjfx Abpef

Year of construction: 2000, condition: like new (used), Brand: IEMCA Model: CNC BOSS 542 / 44 Year 2000 Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Rodpfx Abeiqx Uyepocf Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.