Used Battenfeld Ba 600 200 Cdc for sale (116)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Kwjdox A Df Tepfx Adwot Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 1,12,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Kwodpfex A Dbbjx Adwjt Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar Kedpfx Adsx A A S Ejwswt MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Kwedpfsx A A E Ejx Adwjt Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Kwjdsx A A Akepfx Adwjt Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: ready for operation (used), Year of construction: 2004, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 90063, clamping force: 800 kN, screw diameter: 75 mm, clearance between the columns: 1,120 mm, displacement volume: 3,756 cm³, injection weight: 3,400 g, mold height (min.): 500 mm, opening stroke: 1,250 mm, plate height: 153 mm, total length: 11,100 mm, total width: 3,200 mm, total height: 2,580 mm, overall weight: 63,000 kg, input voltage: 400 V, input current: 308 A, Equipment: documentation/manual, 2-K, double nozzle, machine without handling Kwjdpfx Aew U A Ufodwjt

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Kwjdpfjxyqxujx Adwst Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Ksdpfx Adjxyqw Rowswt Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Kwodpfx Adju Ekaqowst Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Kedpfx Adexyizhjwowt Frequency: 50 Hz

Condition: good (used), Year of construction: 1997, This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Kodpexu E T Ajfx Adwewt Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Kwjdpfx Adex Af Ayswot

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, displacement volume: 1,657 cm³, mold height (min.): 300 mm, ejector stroke: 250 mm, Equipment: documentation/manual, Machine in very good shape. Hopper drier, hopper loader and 3 axis robot included in the price. Price can drop if the machine is purchased without them. Still in production and available for inspection. Kodpfx Aewf Upwodwswt Price loaded on truck.

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Kwedpoxq Exqofx Adwjt

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Ksdpfx Aeu Itqdodwewt

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 57212, clamping force: 4,500 kN, screw diameter: 75 mm, injection pressure: 1,739 bar, mold height (min.): 425 mm, plate width: 1,155 mm, plate height: 1,195 mm, TECHNICAL DETAILS Clamping force: 4,500 kN Kodpfx Adswp Iqiswowt Minimum mold height: 425 mm Maximum mold height: 770 mm Tie bar spacing: 800 x 800 mm Mounting plate dimensions: 1,155 x 1,195 mm Mold opening stroke: 760 mm Injection unit Screw diameter: 75 mm Injection weight (PS): 1,506 g Injection volume: 1,657 cm³ Specific injection pressure: 1,739 bar MACHINE DETAILS Control: Unilog B4 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20,400 kg Robot interface: Euromap 12 Oil tank capacity: 800 liters Hydraulic pressure: 210 bar Rated current motor: 99 A

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 3500 /1900 Injection Moulding Machine Year: 2005 Clamping Unit: Clamping force: 3,500 kN Platen dimensions (H x V): 1,100 mm x 1,060 mm Tie bar distance (H x V): 800 mm x 710 mm Mould opening stroke: 670 mm Minimum mould height: 375 mm Maximum mould height: 710 mm Daylight: 1,380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Screw diameter: 55 mm L/D: 22 Injection pressure: 2,481 bar Ksdpfew Dcxdjx Adwowt Screw stroke: 325 mm Shot volume: 772 cm³ Injection weight (PS): 710 g Injection speed: cm³/s Screw speed: 294 rpm Max. plasticising rate: 68 g/s Number of heating zones: 1 + 5 Electrical & Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank volume: 660 l Machine Dimensions & Weight: Approx. dimensions: 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Kedpfxsk Rnvme Adwjwt Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 Kwjdpfowqd Tcsx Adwet NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm

Condition: excellent (used), Year of construction: 2011, Wittmann Battenfeld EcoPower 110/130 injection molding machine Electric machine, energy efficient Control :UNILOG B6 Year of production : 2011 Closing force 110 tons Auger diameter 25 mm Ksdpfx Ajrn I Nrjdwswt Injection weight max. 55.8 gPS Column spacing 470x470 mm Min. tool height 200 mm Max. tool height 450 mm Hydraulic working pressure 210 bar Machine weight 4600 kg L. 420 x width 140 x height 270 cm, Battenfeld has about 60000 hours (in the machine the computer was changed and the hours were not recorded there, now it has less hours 4944)

Condition: excellent (used), Year of construction: 2004, Battenfeld HM 2700 / 1330 injection molding machine Year of production - 2004 Control - Unilog B4 Closing system : Closing force : 2.700 kN Mold platen size (h x v): 1030 mm x 1020 mm Distance between columns (h x v): 710 mm x 630 mm Mould opening stroke: 800 mm Min. mold height: 350 mm Maximum mold height: --- mm Max. daylight: 1150 mm Hydraulic ejector - stroke: 200 mm Ejector force forward/backward: 59 kN Injection system : Screw diameter: 55 mm Ls/D ratio: 22 Injection pressure: 2041 bar Kwjdpfx Aevt Rutsdwjt Sweep volume: 653 ccm Injection weight, PS: 594 g Injection stroke: 400 mm Screw speed: 318 1/min Maximum plasticization rate: 59.3 g/sec. Nozzle pressure: 100 kN Electrical and hydraulic equipment Installed heating power: 18.2 kW Adjustable drum heating zones: 1+4 Oil tank capacity - 650 l Dimensions and weight Total machine weight: 12,000 kg Dimensions (L x W x H) 5.6 x 1.8 x 2.2 m

Condition: excellent (used), Year of construction: 2005, Battenfeld TM 4500/1900 injection molding machine Year of production 2005 Unilog B4 control Closing system: Closing force 4500 kN Minimum mold height 425mm Maximum mold height 770mm Column spacing 800 x 800 mm Mounting plate dimensions 1155 x 1195mm Mould opening stroke 760mm Injection unit Screw diameter 65mm Kwedpswrihzofx Adwot Injection weight (ps) 930g Injection volume 1078 cm3 Specific injection pressure 1776bar Robot interface Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 Weight: 20400 kg Oil tank capacity: 800 liters

Condition: excellent (used), Year of construction: 2015, Battenfeld TM 180/525 injection molding machine Year of production: 2015 Operating hours: 44753 Control: B6P Closing unit: Closing force [kN]: 1800 Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 520 x 520 Min./max. mold height [mm]: 225…550 Maximum opening width [mm]: 1200 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 180 Injection unit: Screw diameter [mm]: 40 Kedpfx Aewrmkmedwowt Injection volume [cm3]: 288 PS injection weight [g]: 251 Injection pressure [bar]: 2100 Maximum injection speed [mm/s]: 125 Additional equipment: Pneumatic valve - 3 pcs. Core - 1 pc.

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Kwedjk Rnq Nopfx Adwjt Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 injection molding machine Control: B6S Year of manufacture: 2011 Ksdpjwrmqmsfx Adwowt Operating hours: 68038 Closing unit: Closing force [kN]: 3000 Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 710 x 610 Min./max. mold height [mm]: 375 Maximum opening width [mm]: 1150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm3]: 653 PS injection weight [g]: 600 Injection pressure [bar]: 2040 Maximum injection speed: 144 Additional equipment: Pneumatic valve - 4 pcs. Core - 2 pcs.