1
CNC press brakes of Baykal company, model series APHS, represent a professional improvement of the previous standard machines.
The complete hydraulic unit is supplied by HAWE, Schongau, which is perfectly matched to the CNC control "VisiTouch 19". The associated PC offline programming software is also supplied.
The upper tool holder corresponds to the AMADA / Promecam system, the tools for this are purchased from Italy (grade 42 CroMo 4).
To compensate for deflection, the press is equipped with ...
1
Pressure 240.0 t
Cddvlblqx9
Year of manufacture 2015
Bending length 3100 mm
Stroke 260 mm
Machine weight 11 ton
Control ESA S 530
Incl. upper + lower tool
9
General Data
Measurements width 3600 mm
Measurements depth 1800 mm
Measurements height 2800 mm
Machine weight 11000 kg
Main Drive
Pressing force 2400 kn
Number of axis 3
Table
Outer width 90 mm
This Baykal APHS 3112 x 240 Bending Machine from 2013 was built in Turkey. It has 5880 working hours. It works with a pressure force of 2400 kN, and a max. fold length 3100 mm. This 3 controlled axis machine performs with a working speed of 7.6 mm/min.
Application Types
Bending
Synx2ao
10
Comes for sale:
1 piece used CNC controlled hydraulic press brake.
Manufacturer: Baykal
Type: APHS 31200
BJ: 2018
Technical data:
Bh2l3tf
Maximum pressing capacity: 200 to
Bending length: 3100 mm
Bending length between the uprights: 2550 mm
projection in the stand: 410 mm
Table width: 90 mm
Table height from floor: 880 mm
Installation height: 530 mm
Max. Piston stroke: 260 mm
Lowering speed: 150 mm/sec.
Pressing speed: 10 mm/sec.
Retract speed: 130 mm/sec.
max. use range backgau...
6
Technical data:
Maximum pressing capacity: 160 to
Bending length: 3100 mm
Bending length between the uprights: 2550 mm
projection in the stand: 410 mm
Table width: 60 mm
Table height from the floor: 870 mm
Installation height: 530 mm
Max. piston stroke: 260 mm
Lowering speed: 200 mm/sec.
Pressing speed: 10 mm/sec.
retraction speed: 160 mm/sec.
Max. use range backgauge (X axis): 1000 mm
max. use range backgauge (R axis): 160 mm
Adjustment speed of the
backgauge in X axis, servo motor: 330 mm/sec....
10
pressure 150 t
chamfer lenght 3100 mm
distance between columns 2550 mm
throat 310 mm
stroke 230 mm
ajustment speed 90,0 mm/sec
working feed 8,0 mm/sec
return speed 75,0 mm/sec
dayligth 510 mm
table width 200 mm
work height max. 870 mm
oil volume 180 ltr.
Control DELEM
total power requirement 11,0 kW
weight of the machine ca. 8230 kg.
range L-W-H 3540 x 1500 x 2330 mm
Furnishing:
- hydraulic CNC press brake
- with DELEM CNC control DA 65
- electrical backgauge
* with 2x manually adjustable st...
6
Technical data:
Working length: 6100 mm
column width: 4400 mm
pressing force: 300 to
CNC control: DELEM DA51
controlled axes: Y1, Y2, X
B70jiludzg
mot. adjustable backgauge
throat: 350 mm
installation height: 585 mm
working height: 1115 mm
table width: 280 mm
number of supporting arms: 4
CE mark
Dimensions (length x width x height): approx. 6600 x 2100 x 3450 mm
Weight: approx. 27 tons
the machine is completely cleaned before delivery
The seller is not liable for writing or data transmission err...
6
Full option Baykal pressbrake
6 axis CNC controlled Y1,Y2,X,R,Z1,Z2
Wilson bottom and top tool clamping
Cueqnyj0
Automatic fiesler laser savety
Delem DA 66 t
Only 80 hours
11
For sale comes:
Qpnsr
1 piece used hydraulic press brake
Manufacturer: Baykal
Type: APHS 61240
BJ: 2016
Technical data:
Maximum press capacity: 240 to
Bending length: 6100 mm
Bending length between the uprights: 5100 mm
Overhang in the stand: 500 mm
Table width: 90 mm
Table height from the floor: 1100 mm
Installation height: 500 mm
Max. piston stroke: 260 mm
Lowering speed: 140 mm/sec.
Pressing speed: 10 mm/sec.
retraction speed: 100 mm/sec.
Max. use range backgauge (X axis): 1000 mm
max....
10
sheet width 3060 mm
plate thickness 10,0 mm
thickness at "Niro-steel" 6,0 mm
down holder 14 Stück
no. of strokes 13 Hub/min
cutting angle 2,0 °
throat 350 mm
back stop - adjustable 1000 mm
work height max. 800 mm
Number of working hours 715 h
oil volume 170 Liter
engine output 22,0 kW
weight 9.415 kg
range L-W-H 3850 x 2275 x 1850 mm
** New price ~ 50.000 euros
** from a maintenance workshop
** only approx. 715 operating hours
-----
heavy electr. / hydraulic swing shears
* with manual cuttin...
13
Comes for sale:
1 piece used 2Kw compact laser
S9zwv9
Manufacturer: Baykal
Type: BLE-PRO 1530 / 2 kW
BJ: 2019
Technical data
Output power: 2.0 kW
max. workpiece size: 1524 x 3048 mm
cutting area (LxW): 1500 x 3000 mm
X-axis travel: 3000 mm
Travel Y-axis: 1500 mm
Both axes are moved by 2 servo motors "Beckhoff" and pinions / racks "Wittenstein".
Travel Z-axis: 150 mm, driven with ball screw
Max. Cutting speed: 50 m/min
Rapid traverse X-Y axis: 110 m/min.
Cooling method: Water c...
7
Technical data:
Cutting length: 3060 mm
Cutting capacity ( ST 42 ): 6,0 mm
cutting capacity V2A stainless steel: 4,0 mm
cutting angle: 1,6
system pressure: 200 kg/cm²
Hold down: 17 pieces
Strokes per minute: 20 cuts/min.
Pump flow rate: 32 cm³/rev
Oil tank capacity: 160 l
Usable measuring range of the backgauge: 5.0 mm to 750 mm
Main motor 400 V, 50 Hz, 3 ph.: 11 KW
Servomotor of the backgauge: 0,37 KW
Standard accessories:
- Table structure closed version, consisting of
exchangeable support pl...
15
Control Unit
Brand Tecnos
Model CNC
Main Drive
Plasma power 130A
Movement
X-Axis Movement 1550 x 3050 mm
B93tf9ncjg
This Baykal BPH 1503 COMPACT plasma cutting machine was manufactured in 2015 in Turkey. The machine has a total of 8640 production hours. It is operated through a Tecnos CNC control unit. It has a plasma power of 130A kW.
Application Types
Plasma Cutting
6
Baykal HGL 3100x6 mm
Like new ONLY 150 HOURS
Front and back laser safety
Elektric back gauge
Ccuqbbt9dr
Elgo controller
12
Very neat Baykal press brake
Type APH 3106 120
Akas Fiessler laser safe
Amada/Euro clamping
Electric back gauge
Depth adjustable
Includes 1 set of tools
C2eclsbi
Only 1442 hours
10
sheet width 3060 mm
plate thickness 6,0 mm
thickness at "Niro-steel" 4,0 mm
distance between columns 3100 mm
down holder 16 Stück
no. of strokes 20 Hub/min
oil volume 160 ltr.
cutting angle 1,6 °
Number of working hours 1445 h
total power requirement 11,0 kW
weight 5.450 kg
range L-W-H 3800 x 1940 x 1560 mm
Furnishing:
- Hydraulic swing shears
- ELGO digital display model P9521, for electric backgauge
* Travel backgauge X = 750 mm
* zero-backlash ball screw for backgauge
Cbwpmrrk3f
* Backstop...
12
Comes for sale:
1 piece used CNC - plasma cutting machine with complete equipment, software with aut. nesting program and TRUE HOLE equipment.
Manufacturer: Baykal
Type: BPL-H 3006
BJ: 2016
Cchtfvyhsh
Technical data / scope of delivery
Cutting range Y-axis (longitudinal): 6400 mm
cutting range X-axis (crosswise): 3200 mm
dual-synchronized servo drives at the Y-axis
single-synchronized servo drives at the X-axis
brushless AC - servo-drive motors
fast adjustment speed 30 m / min
cutting bri...
5
Hydraulic guillotine shear
Manufacturer : Baykal
Type : MGH 3013
Cutting length : 3040mm
Sheet thickness (42kgf/mm) : 13mm
Sheet thickness (70kgf/mm) : 8mm
Hold down 17 pieces
Stroke rate 12 strokes /min.
N0wrx
Oil capacity 180 liters
cutting angle 2,4
manual cutting gap adjustment
side stop 90 ° degree, 1000 mm long, with T-slot, flip-stop and millimeter scale
2 front support arms with mm scale and flip-stop cams
cutting line illumination
Support table with ball rollers
backgauge range from 5-1...
14
General Data
Measurements width 6550 mm
Measurements depth 10500 mm
Measurements height 2250 mm
Machine weight 16800 kg
Control Unit
Brand SIEMENS
Model Sinumerik 840D
Main Drive
Laser power 2 kW
Movement
Z-Axis Movement 100 mm
Table
Outer length 1525 mm
Outer width 3050 mm
Media
Main electronic connection 380 V / 50 Hz
This Baykal BLS-NL 1530 2kW Laser cutting machine was manufactured in the year 2015 in Turkiye. It is equipped with SIEMENS Sinumerik 840D control unit. The machine has a l...
6
Pressure 180 t
Bending length 3100 mm
Control CYBELEC DNC 74
Machine weight approx. 11000 kg
Cbdqww8tqp
7
Sheet cutting machine - guillotine. Overall dimensions - 3860 mm - length; 2200 - mm - width; 1560 mm - height; 5100 kg. Maximum cuts 3100 mm from 0.5 mm to 6 mm St . Rear stop from 8 mm to 750 mm. EMCO control.
B9tnezkk8s
10
pressure 180 t
chamfer lenght 3100 mm
distance between columns 2550 mm
throat 310 mm
stroke 220 mm
ajustment speed 80,0 mm/sec
working feed 10,0 mm/sec
return speed 58,0 mm/sec
dayligth 510 mm
table width 240 mm
work height max. 870 mm
oil volume 180 ltr.
Control ELGO
total power requirement 15,0 kW
weight of the machine ca. 9.100 kg.
range L-W-H 3500 x 1700 x 2440 mm
** from a maintenance workshop (!!)
Furnishing:
- conventional hydraulic press brake
* with torsion shaft for parallelism of...
5
Manufacturer: Baykal
Type: MSH 3100 x 13
Manufacturing year: 2008/03
Maximum cutting thickness: 13 mm
Maximum cutting length: 3060 mm
Voltage: 380 V
System pressure: 260 bar
Stroke per minute: 12 n/min
Overall dimensions: 4000 x 3000 x 2200 mm
Byw98rlup9
Weight: 11900 kg
5
Pressre: 200ton
Stroke: 220 mm
Motor power: 15 Kw
Dmwac83
Voltage: 380V
Oil capacity: 210 Liter
Length: 3200 mm
Width: 1500 mm
Height: 2470 mm
Weight: 9100 Kg
4
X stroke - 3000+R
Y stroke - 1250
capacity - 30t
max strokes - 600 stroke/min
P3dvd
table size 1250 x 3000
machine weight 12500 kg
ROTATING Multitool head 8 tools x 18 mm
10
New stockmachine
Controller Delem DA-53T, 2D
Y1, Y2, X, R
CNC crowning
AKAS laser
Tools for full length
Bending length 3100mm
Bending force 200tons
Main motor 18,5kw
Oil capacity 210liters
Inside frames 2550mm
Daylight open 445mm
9jbre7u8
Stroke 210mm
Throat gap 255mm
Approach 150mm/s
Working 10mm/s
Return 130mm/s
8
Used conventional press brake from Baykal
Type: APH 2604 60
capacity: 2600 x 60 ton
NC controlled
Electric back stroke
Electrical depth adjustment
B9sdzsfxt0
1 complete set of dies with Multi V die
New seals in the cilindern
10
sheet width 3060 mm
plate thickness 10,0 mm
thickness at "Niro-steel" 6,0 mm
down holder 14 Stück
no. of strokes 13 Hub/min
cutting angle 2,0 °
throat 350 mm
back stop - adjustable 1000 mm
work height max. 800 mm
P00nd
Number of working hours 1205 h
Control CybTouch
oil volume 170 l
oil volume 260 ltr.
engine output 22,0 kW
weight 9.415 kg
range L-W-H 3850 x 2275 x 1850 mm
** New price ~ 50.000 euros
** from a maintenance workshop
** only a few hours of operation
-----
heavy electr. / hydr...
1
for working length: 1000 mm
Total height: 145 mm
weight:
0z0cmfwpf
BLE 1530 laser cutting machine is a modern machine with integrated optics, compact mechanics and with CNC control and drive technology BECKHOFF. It combines proven "nLight" laser fiber technology with a modern high-performance CNC and software system Lantek Expert Cut, which can quickly and efficiently process all types of metal.
Laser cutting systems of this power and size are used to quickly and efficiently give smooth edges to workpieces in the cutting area up to 1.5 m x 3.0 m at max. 16.0 mm...
7
OFFER 22028
F2h8xg3j
Technical data:
- max. working width 1060 mm
- max. material thickness at 40 kg/mm² strength 1,5 mm
- man. backgauge adjustable up to 500 mm
- front angle stop
- sheet downholder
- table size 1100 x 650 mm
- working height 780 mm
- space requirement approx. W 1800 x H 1050 x D 750 mm
- weight approx. 400 kg
6
Baykal hydraulic guillotine shear type MGH 3100/12
Qvqoy2bf
working width 3100 mm
max sheet thickness 12 mm
motorized backgauge 1000 mm
Elgo digital display type 71
2
Good working Baykal mgh
2100x13mm
Electric back gauge
B9khsztsrr
1
Length: 1000 mm
Mld9h
Edge length: 100 x 100 mm
Weight:
7
Baykal notcher 200x6
Uzmnrqlv
With adjustable angle
2
Total length: 2830 mm
0z0bzdlhd
Length in detail:
32; 40; 50; 60; 2 pcs. 65; 70; 77; 86; 151; 334; 497; 500 and 800 mm
Weight: