Used Berg Und Schmid for sale (122)

Year of construction: 2012, condition: used, Max. Saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangular 380x70m Nsdpfx Alozabmqshelc Cutting capacity 45° left Round 180mm, Square 150mm; Rectangular 290x70mm Cutting capacity 45° right Round 180mm, Square 150mm; Rectangle 290x70mm Digital grade display for the saw table Cutting table swing range 180° Spray device 2-Hand-Bedienung

Condition: used, Format: 0x0 Nlsdpfx Aex Rh D Selhjc Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade Nljdpewa Ecqsfx Alhoc 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut Nljdpfx Alst I R Edjhjc 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: ready for operation (used), For sale: used metal-cutting band saw. Brand: Berg & Schmit, model DGS 350/HA. The machine is in good working condition and ready for use. Suitable for cutting various types of metals. Its robust construction ensures stability and precise cutting. Net price: 23% VAT applicable. Cutting capacity: 320 mm 45°: 320 mm 320 x 300 mm Motor: 2.2 kW Blade: 4250 x 27 or 34 x 0.9/1.1 mm Weight: 930 kg Nledszdanhspfx Alhsc

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath Nljdpfx Ajr Ik Sqelhoc - Closed saw frame - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 410 mm, control type: CNC control, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Nodpeytvqqefx Alholc Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Nlsdor Ilktjpfx Alhjc Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: new, cutting diameter 360 mm saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: 4 kW drive motor with 41 mm saw blade width Nlsdswg Sfljpfx Alhsc Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors

Condition: ready for operation (used), Year of construction: 2019, This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Additional equipment • Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. • Leveling element (1 set = 4 pieces) with stud bolt M 12x100. • Feed side – left. Nlsdpfxox Nr Sqj Alhjc • Feed roller conveyor URB 290, Length 3000 mm. • Feed adapter for URB 290/400. • Outfeed roller conveyor URB 290, Length 2000 mm. • Removal adapter for URB 290/400. • Connecting piece for machine, attachment on the right. • LM 55 M/man. Length stop, Measuring length 2000 mm. Machine Benefits Technical Machine Benefits • Automatic saw with a roller conveyor feed side length of 1500 mm and a discharge side length of 1000 mm. • Sheet metal tray for setting the machine. • Control unit attachment of the control unit to the swivel arm. Extra Information Machine still under power

Condition: used, Technical details: stroke: 45 mm dayligth: 205 mm throat: 92 mm Pressing power: ca. 2 kN Nsdpfou N A D Ajx Alhelc table-size: 120 x 160 mm distance between table / ram: max. 205 mm dimensions L x W x H: 0,24 x 0,17 x 0,8 m Total weight, approx.: 23 kg The height of the plunger can be adjusted by loosening the Allen screws to 140 mm using the hand crank. Plunger holder Ø 10mm with return spring Base with 2x clamping hole Ø 12mm *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m Nodpfx Alsu Nilyehslc The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, Njdpfx Aju R S I Hjlholc carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Not included: - Bunker discharge system - Chimney Njdsvgcwmspfx Alhslc Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you.

Condition: new, Outer dimensions (width x height): 80 x 80 mm Overall length: 6050 mm Divided into: 2x25/30/35/40/45/50/3x100/11x500 mm Permissible load: 200 t/m Material 42CrMo4, hardened (plasma deep-nitrided: hardness approx. 700 HV, 58 - 63 HRC, depth 0.4 - 0.5 mm), Nledoy N S Irjpfx Alhoc ground

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 21,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 80, number of axes: 5, This 5-axis SCHMID SE 368 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverse rates of 75/40/90 m/min in X/Y/Z, and a shuttle table. Equipped with dual NC rotary swivelling units, a 30-fold tool changer, and HSK-A63 tool holder. Max speed is 10,000 rpm. Includes a chip conveyor and recooling system. A great opportunity to buy this SCHMID SE 368 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Double spindle • Shuttle table • 2x 2 NC rotary swivelling units • Switch cabinet system • Chip conveyor Knoll 600K-1 2019 • Hydraulic unit • Filter system • Recooling system Lahntechnik KOF1803-100 2020 • Number of tool magazine positions: 2x 30 • Rotary table (NC / hydraulic clamping) : n x 360o, vertical axis, Machine Benefits Technical Machine Benefits • Ibag three-phase main drive : s1-100% 40 kw / s6-40% 52 kw • Key performance data working spindle kw s1 : 3 12 29 40 40 Nledpfeyyuwwex Alhsc • Spindle speeds approx. 1/min : 1,000 5,000 10,000 20,000 24,000 • Torque approx. Nm : 27 27 27 19 17 • Tool diameter with free neighbouring positions : 125 mm • Swivelling table (nc / hydraulic indexing) : vertical axis, 0° - 180°, max. Rotation angle in connection with 5th axis : +/- 150° • Rotary table diameter : 400 mm, rotary table (horizontal axes u1-u2/ v1-v2), rotary table (nc / hydraulic clamping) : n x 360o, vertical axis, rotary table diameter : 330 mm • Pallet clamping : 2 zero point clamping modules/ table • Position measuring systems : absolute position measuring systems • Position tolerance x - y - z : 0. 008 mm (vdi/dgq 3441) Extra Information Machine still under power

Condition: reconditioned (used), Year of construction: 2019, 2-column high-performance automatic bandsaw BERG & SCHMID SBS 300 VA-1/CNC Year of manufacture: 2019 Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimension flat: 300 mm x 260 mm Blade speed: 20 – 100 m/min Modern SNC 20 control Frequency-controlled saw drive Operator buttons with pictograms Driven chip brush Hydraulic blade tensioning Clamping pressure adjustment Work light Chip conveyor 2 m roller conveyor Nlodpfx Aleyw H Enshoc

Condition: excellent (used), saw blade diameter 350 mm Nledpfx Aoiqy Abslhsc

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Nsdpfx Alsy U Dykjhslc Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head (adjustable dovetail guide) Nlsdsrrvn Aopfx Alhsc - Automatic cooling system - Machine base frame with chip drawer - Metal handle for high clamping force - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, faceplate -Manufacturer: Schmid, Plan and boring head -Type: UBS Gr.1 -Recording: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos Njdpsrzvwwsfx Alhslc -Case dimensions: 240/125/H100 mm Total weight: 4.0 kg

Condition: used, Schmid swiveling assembly table 12x3 m with longitudinal rollers, device without hydraulic unit Nljdpfx Aley Afp Aohsc

Condition: good (used), Thread Cutting Machine Berg + Schmid Delta 4 Product Description Cutting range: R 1/3 - 4", M8-M52 Powerful capacitor motor 230V-1 kW, exceptionally quiet operation 3 speeds: 15+27+58 rpm (also under full load, built-in gearbox) With 2 automatic thread cutting heads: R 1/2 -2", R 2 1/2 - 4" Complete with cutting dies: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", conical DIN 2999 Automatic cooling directly through the cutting head Quick-release chuck, pipe cutter, internal pipe reamer Nljdoyy S Efjpfx Alhjc Includes occupational safety equipment with safety foot switch and 4 support legs

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,936 h, travel distance X-axis: 715 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 10,000 kg, spindle speed (max.): 10,000 rpm, tool weight: 8,000 g, number of axes: 5, This 5-axis SCHMID SE 371 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control system, a shuttle table, and a 30-position tool changer with HSK-A63 tool holders. Additional highlights include a chip conveyor by Knoll and a recooling system by Lahntechnik. A great opportunity to buy this SCHMID SE 371 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Shuttle table • 2x NC rotary swivelling unit • Chip conveyor Knoll 600K-1/II 2019 • Filter system • Recooling system Lahntechnik KOF1803-100 2020 • Hydraulic unit • Switch and control cabinets • Rotary table rotation axes NC/hydr. clamping : 360 x n° degrees • Rotary table diameter : 284 mm, Machine Benefits Qualitative Machine Benefits • Digital inverter system • Space requirement incl. Operation : approx. 3. 5 x 5 m2 • The machine ran dry / without coolant. The machine has a profibus interface. Special schmid chucks are currently installed. Part-specific, hydraulic. Technical Machine Benefits • Swivelling range: -22/+95° • Traverse range x - y - z : 715 - 400 - 500 mm Nledpeyyuv Hofx Alhjc • Three-phase main drive : kw at s1 100% / s6 40% ed • Key performance data working spindle kw / s1 / s6 : 0. 5 • Spindle speeds approx. 1/min : 50 1,000 1,850 10,000 • Torque approx. Nm s1/s6 : 100/135 100/135 100/135 24/31 • Acceleration x - y - z : 4-6-9 m/sec2 • Tool change time : approx. 2. 5 sec. • Horizontal swivelling range nc/hydr. Clamping : - 22° / + 95° degrees • Centre distance of the rotary axes / chuck : 430 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° Nsdoyy A Hyspfx Alhelc . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)