Used Biscuit Production Line for sale (28,341)

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % Podpsr Iyvbsfx Ab Ijrd - triple brick offset 25 %

Year of construction: 2008, condition: ready for operation (used), Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15. Psdpfxjg Tvy Dj Ab Ierd

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Prsdpfx Abewbqx Hj Iod Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: ready for operation (used), Year of construction: 1994, operating hours: 20,000 h, functionality: fully functional, year of last overhaul: 2022, Web width: 32"  Cylinder: 28 1/3" 9 pcs. 23 1/3" 8 pcs  Printing tower: 8 pcs.   Numbering tower: 1 pcs. Psdpfx Absugizas Isrd Color control: Eltromat Polugraph Offcon 3 Camera: BST UV drying: 8 pcs of IST  Turnbars: 2 pcs. One between tower 2-3 and one between tower 4-5 Plow folder: Inline with 3 heads Blanket washing: Elettra Unwinder and rewinder A lot of spare parts

Condition: good (used), Year of construction: 2022, functionality: fully functional, Pellet production line : XGJ 560 granulator with a capacity of up to 1.5 T/H year of manufacture 07/2022, 90kW main motor with smooth start (additional second die + pressure rollers). Remix-Oil RG 1000 dryer with heat exchanger. Year of manufacture: 12/2015. Boiler with biomass feeder. Wet sawdust hopper with feed redler, controlled by inverter. Predpfxeu Ni I Io Ab Iod Vibrating screen. Sawdust belt feeder for the dryer. Steam exhaust fan controlled by inverter. Cyclones with screw feeder and buffer. Bucket receiver of dry sawdust. Dry sawdust buffer with auger feeder. Mixing feeder for different fractions of material fed to the granulator. Additional buffer with feeder for sawdust that does not require drying. Mavark wago-packing machine with plastic bag sealer. Control cabinets equipped with inverters for smooth regulation of the drying process and sawdust transport, wiring. The entire Line is retrofitted with reactive power capacitors. The price does not include transportation.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, automatic line for production of disposable textile rusks. Full Automatic Mask Machine - production line for medical plastic masks capacity 90 - 100 pcs per 1 minute Prjdeqvl Uaspfx Ab Iod For more information and videos of the machine please contact us.

Condition: used, Parquet mosaic production line length 160 mm: 1. Schroeder mosaic press MTA-2 PE 1992 r 7,3 KW 2. Schroeder feeder PST 1992 r 3. Schroeder feeder SB35 B 1992 r 4. schroeder feeder BA-2 1992 r 5. schroeder feeder BA-2 1992 r 6. Schroeder feeder SB35 B 1992 r 7. WENIG GMBH P 120 double edging machine 8. WENIG GMBH P121 Thicknessing machine with cutters ( not Hollowing heads) 9. WENIG GMBH P122 multi-saw 10. WENIG GMBH 135 sorter - sorting system for 3 classes with interchangeable magazines (containers). Magazines 200pcs. Pedpfx Aetp I Hcob Ierd

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Equipment: CE marking, The Störi Mantel Leg Machine is an automatic device for producing the bottom parts of wooden pallets, also known as pallet bases or legs, which operates on the proven principle of electromechanical nailing. The main key features that will increase your production capacity, save on operational and personnel costs, and speed up the entire pallet nailing process include, for example, the production cycle speed, the possibility of integration with other equipment such as a cross-cut saw or pallet nailing machine, convenient operation of the entire machine by a single operator, and easy maintenance and servicing. The Leg Machine can be designed with a maximum leg length of 1 500 mm or 3 000 mm. Prodpfxsubbu Ue Ab Ijd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, we are selling complete wood-aluminum window sash line. Sash production line consists of: 1. wood package lifter with roller track (4X1250kg) 2. 9 edge planer Leadermac lmc 923 Hypermac (year of construction 2012, maximum width 230mm) 3. Pedolin processing center( year of construction 2003, Cuts optimized details according to the program, mills and installs locking points, mills mullion joint, drills mounting holes.) Prodpfxeu Hgi Do Ab Ied 4. Primer paint chamber( 4X wagner GA250Al spray guns, Wagner Cobra high pressure pump) 5. Drying chamber

Condition: good (used), Year of construction: 2009, Line for the production of "B" type energy-absorbing barriers, SIGMA posts and semi-closed channels For 460 x 4.2 mm strip. Weight of the whole set about 25,000 kg. The line includes the following sections: Strip uncoiler with hydraulic jack for new coils. 1 roller unit + guillotine. Manipulator. Welding area. Rolling section: -rollers for profiling SIGMA post, -rollers for the "B" guide and the semi-closed channel. Bean punching machine. Punching machine for top holes. Punching machine for bottom holes. Controller with display. Instruments for SIGMA post. Prsdpjt Ak Dpsfx Ab Ijd Instruments for semi-closed channel. Instruments for marking.

Condition: ready for operation (used), A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. Predpetnilhofx Ab Iod

Condition: good (used), Complette line for ravioli production. Pjdpfxeub Dius Ab Ierd

Year of construction: 2004, condition: excellent (used), The complete line includes: 1. GUSBI – 24 Station rotary table with PU ( polyurethane ) robot applicator. Brand : GUSBI Italy Model : PF24 Serial no. 4625 Year of production : 2004 Number of station : 24 Size of each station : 600mm x 500mm Power – 30 KW Pneumatic – 500nl/min by 8bar Output / shift 8h – 2.000 – 3.500 pcs. – depends on size and quantity filter on each station 2. Automatic Rotary Pleating Machine Brand : SAS Italy Model: PANELFILTER Type : 350/190 Power – 3,5 KW Pneumatic – 6 bar – minimal consumption Year of production 2004 No. of rotary rollers / blades / sets – 8 pcs. Prsdpfegcvc Tox Ab Iod - pleat height 20mm - pleat height 28mm - pleat height 32mm - pleat height 36mm - pleat height 38mm - pleat height 40mm - pleat height 48mm - pleat height 53mm - pleat height 60mm Machine is design ready for trapezoidal pleat pack. 3. Hot Melt dispenser / applicator : Brand : NORDSON USA Type : VA 025-4FFXX4, 400V Model : Versa Blue 8036-189 Serial no. LU04B01511 Year of production 2004 Tank size for HM : 50kg No of heads – 3 Power - 11 KW Pneumatic – 6 bar – minimal consumption 4. Aluminium moulds - 131 pcs. for 100 types of diffrent automotive air panel filters. Additional we offer transfer of know how & trainning.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,500 h, power: 200 kW (271.92 HP), Complete pellet production line for the production of feed pellets/straw pellets/fertilizer pellets from agricultural raw materials, whereby the pellet press and hammer mill are also suitable for the production of wood pellets. Prodpfx Asv Ak S Deb Iod Hammer mill is completely new (built in 2021) and has only been in operation for 2 hours. Valid ATEX certificate! SCOPE - Pellet press - Conveyor belt - Elevator - Pellet cooler + sieve - Buffer container with discharge for the ground material - 2 cyclones (centrifugal separators) with rotary valve - Fan for cooler extraction - 1 new ring die and various used spare parts - Feeder table for bale shredder - Bale shredder including control - Hammer mill (new) including control - Centrifugal separator - Scheuch dust filter including control - Discharge screw - BigBag station for dust filter TECHNICAL DETAILS System throughput: 1.3 t/h (depending on material) Hammer mill throughput alone: 2 t/h (depending on material) Pellet press output: 75 kW Feeder table length: 10 m Bale shredder output: 35 kW Hammer mill output: 75 kW Output Dust filter: 20,000 m³/h Dust filter manufacturer: Scheuch Dust explosion report: 2023, according to EU ATEX Directive 2014/34 MACHINE DETAILS Hammer mill dimensions: 2,350 x 970 x 1,200 mm

Condition: excellent (used), functionality: fully functional, Vemag sausage production line (Stuffer, portion cutter, hanger) Vacuum stuffer with loading Vemag brand Model HP 7E Year of production 2008 Power 10kW Pjdpfx Absv Ucgko Isrd Voltage 400-460V 15A 50/60Hz Portion cutter Vemag brand Model LPG 208 Year of production 2011 Power 6kW Voltage 400-460V 9A 50/60Hz Hanger Vemag brand Model AH 204 Year of production 2011 Power 1.5kW Voltage 400-460V 3.5A 50/60Hz

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Prodpfow Dn Uwox Ab Ijd Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Year of construction: 1990, condition: ready for operation (used), A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Prodpfjv Nn Hxjx Ab Iod

Condition: good (used), Year of construction: 2009, Double welding and cleaning line URBAN consisting of 2 four-head welding machines AKS 6910/4 - 30 /40, one with right-hand stop, one with left-hand stop, WINDOWS control, each with a URBAN TBA transport/cooling belt, transverse table with motor for removal of individual elements, URBAN SV 815 cleaning automatic with two heads, with infeed table and rotatable outfeed table, additional station for processing of corner and scissor bearing drillings as well as milling of elements with varying widths, buffer rack with tiltable shuttle table and two additional outfeed tables. Prjdsw Niqpjpfx Ab Isd

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Unirex 3000 machining center Podsh H Iyxopfx Ab Isrd Univar 15 Unitex 15

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, overall weight: 3,000 kg, total length: 10,000 mm, total height: 2,000 mm, total width: 10,000 mm, Equipment: documentation/manual, This machine is used for the automatic production of flat three-layer masks by automatic forming from non-woven fabric rolls, automatic transfer, with a nose clip and rolled material of a set length cut simultaneously, folding at the edges of the mask, folding and flattening, joining by ultrasonic welding, cutting and forming, ultrasonic welding of loops for ears, etc. - All these processes are done automatically. Main parameters: -Suitable for mask types: Regular three-layer medical mask (disposable medical masks), surgical mask and medical protective mask Prsdsudy Acepfx Ab Ied -Product specification: Mask for adults: 175 mm x 95 mm, optional child mask 165 mm x 95 mm; or 145 mm x 95 mm -Speed: 60 pcs/min -Material: PP non-woven composite fibres (three layers), typically 25 g per square meter -Other materials: Nose clip (3 mm), ear loops (nylon with elastic, usually 3 mm) -Processing method: Ultrasonic welding -Air flow volume: 1700 l/min -Power: 20 KW, 220V/50Hz -Dimensions: 10m x 10m x 2m -Weight: 3000kg Technical features: (1) Self-alignment of three rolls of material fed into the machine, i.e. the outer, filter and inner layer. Continuous symmetrical ultrasound compression of both sides. Continuous pressing with rollers, followed by cutting. The production line branches off into two separate welding machines for attaching ear loops, enhancing line balancing and achieving high productivity. Automatic counting and folding after the ear loops are welded. (2) The production line follows the »1 in 2« principle, which is the core component of the mask production system, distributing two sets in production for to weld the ear loops. (3) Ear loops can be made by automatic cutting and automatic welding with ultrasound. (4) The nose clip can be made by automatic feeding and cutting. (5) The system offers stability, few malfunctions, a pleasant appearance, high efficiency, energy savings and full automation.

Condition: excellent (used), Year of construction: 2013, CFT S.p.A. sorting and crushing line consisting of: - CFT S.p.A. receiving hopper with drum screen type: VASCA di LAVAGGIO con ELEVATORE model: L945 1/13 serial number: 24621 year of manufacture: 2013 plastic mesh belt with partitions belt width: 540 mm partition height: 30 mm distance between partitions: 200 mm lifting height: 1950 mm sieve: 1 mm overall dimensions: 3400 mm x 2950 mm x 1950 mm. - Conveyor belt, loading/inspection belt CFT S.p.A. inspection belt with work platform type NASTRO di CERNITA model L945-313 serial number 24622 year of manufacture 2013 plastic belt belt width 600 mm overall dimensions 4200 mm x 2800 mm x 1680 mm. - S/s tank with volume sensor - Lifting/loading/feeding belt with partitions CFT S.p.A. plastic belt with partitions belt width: 600 mm partition height: 120 mm distance between partitions: 700 mm lifting height: 3100 mm overall dimensions: 5000 mm x 1900 mm x 3900 mm. - CFT S.p.A. crusher with progressive discharge pump Type: TRITAGHIACCIO Model: CR 2 Serial number: 24602 Year of construction: 2013 Prodpfxevq I Hus Ab Iod Internal dimensions of hopper: 950 mm x 1000 mm x 900 mm Overall dimensions: 5800 mm x 2100 mm x 3500 mm - Hopper/bunker/tank with volume sensor Dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: used, Machinery installation for window and door production Weinig, Biesse Technical Data: Currently, this line is used for the manufacturing of timber windows, timber-aluminium windows, block frame elements, box-type windows, entrance doors, and lift-and-slide doors. The machinery installation comprises: Support table with 3 sections, Weinig Type UC Matic: - Automatic infeed: to moulder Moulder Weinig Type Unikat 23EL: - Year of manufacture: 2007 - 2 bottom spindles - 2 top spindles - 1 right spindle - 1 left spindle - Glazing bead separation - Glazing bead profiling Psdpfx Ajwa Dk Tsb Ierd Sanding machine Hess Type Roto Finish Crosscut saw Weinig Type Unirex: - Crosscut saw - Drilling unit - Lock case milling unit Tenoning line Weinig Type United 15 - Slotting spindles: 3 - Max. slotting depth (mm): 120 - Counter-profiling: possible Rebating and profiling machine Weinig Type Univar 12 - Equipped with: 7 spindles Linkage to Biesse line Machining centre Biesse Type WinLine One - Year of manufacture: 2015 - Equipped with: 2 gantries - Workpiece length (mm): up to 6000 - Automatic operation max. length (mm): 4500 - Paternoster buffer - Gantry 1: equipped with saw, travelling tool changer - Gantry 2: equipped with lock case milling unit (FlexiWood), segment table for curve work Biesse Flexstoor 1 Biesse Flexstoor 2 Sale of the complete line including tools

Year of construction: 1996, condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Pjdpougv R Iofx Ab Isrd

Condition: good (used), Year of construction: 2009, Weinig Conturex window production line C 114 Year 2009 Working width 25-260 mm Working height 25-110 mm Psdpfx Abjuzu Tye Isrd Table length PowerGrip 4 x 2280 mm Workpiece length 200-6000 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 08020115, input voltage: 400 V, input frequency: 50 Hz, Sausage production line Stuffer Brand Vemag Model HP 12E Year of production 2016 Power 16kW Voltage 400-460V 27A 3~50/60Hz Portioner Brand Vemag Model LPG 209 servo Dimensions 1800X850X1400 Hanger Brand VEMAG Pjdevztr Dopfx Ab Ijrd Model AH212 Dimensions 4500X800X1500