Used Chocolate Production Line for sale (24,044)

Year of construction: 2018, condition: excellent (used), Fully automatic production line for chocolate bars, made of stainless steel Manufacturer: GUSU Food Processing Machinery Year of construction: 2018 Condition: very good, little used The line consists of the following units: Chocolate bar production line, TPX-400, 400 V 3P 50 Hz, 40 kW 180° turning conveyor belt, TPX-400, 400 V 3P 50 Hz, 1.5 kW Elevator, TPX-400, 400 V 3P 50 Hz, 1.1 kW Straight roller, TPX-400, 400 V 3P 50 Hz, 0.75 kW Longitudinal cutter and distributor, TPX-400, 400 V 3P 50 Hz, 1.27 kW Single group roller, TPX-400, 400 V 3P 50 Hz, 1 kW Transverse cutter, TPX-400, 400 V 3P 50 Hz, 2.5 kW Chocolate storage tank, BWG500, 400 V 3P 50 Hz, 6 kW Chocolate conche, JMJ500, 400 V 3P 50 Hz, 9 kW Chocolate enrobing machine, TY J600, 400 V 3P 50 Hz, 21.38 kW Cooling tunnel evaporator I, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator II, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator III, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator IV, TY J600, 400 V 3P 50 Hz, 0.75 kW Cooling tunnel evaporator V, TY J600, 400 V 3P 50 Hz, 0.75 kW Ledpfszx Uz Dex Alyoah Cooling tunnel evaporator VI, TY J600, 400 V 3P 50 Hz, 0.75 kW Automatic packaging machine, SFC 2, 400 V 3P 50 Hz The production line is 35 meters long. If you have any questions, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit Lsdpsz Rnu Tefx Alysah • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Ljdpfx Aez N A Nielyeah Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 1,00,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Laodpfx Alsi Akrkjyjh Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: good (used), Schmedt hardcover book production line The machines are in very good condition and have seen little use. Lsdpsz S Uziefx Alyjah The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED Lodpfx Aoz A Dxkslysah FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Lodpfxezuukqo Alyeah Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: Lajdpfxszx Rkzj Alyeh 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors Lodsz D R S Topfx Alyeah 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Lajdpfez Hw Umjx Alysh Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Wood lengthening machine - KALLFASS PFA-250 Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Laodpfx Ajwgacrjlysh Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Roller conveyor Stacker - ENGELER ELEWFTORSTAPLER

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. Lajdpfxo Aba Nce Alyeh However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 - Siemens S5 Laedjz Ngziopfx Alyeh - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2025, For sale: welding and deburring line with a rotating table for PVC windows. The line consists of: Lodpfoz A R I Esx Alyeah - Welding machine - HOLLINGER MSP, year 2005 - Transport and cooling table - HOLLINGER SVS, year 2005 - Automatic cleaning machine with welded frame rotation - ROTOX EPA 472, year 2005. The production line was used only in Germany and is in very good condition, having been regularly serviced. Negotiable price: 22,000 euros + VAT.

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Complete MECATHERM line from 2011, consisting of an H1 volumetric divider and an RT2 shaping unit with an integrated pre-fermentation and resting system. Industrial line designed for the automated production of baguettes, long loaves, and other bakery products, depending on the shaping equipment used. Lasdpfxjz Sfa De Alysh Line composition: - MECATHERM H1 volumetric divider - Complete MECATHERM RT2 shaping unit - Integrated pre-fermentation and dough resting system - Shaping and elongation system - Automatic depositing system onto trays - Several additional shaping accessories and equipment - Conveyors and connecting equipment Features: - Manufacturer: MECATHERM - Year: 2011 - H1 divider capacity: up to 2,500 pieces/hour, depending on the weight - Production adapted for baguettes and various loaf sizes - Automated line from dividing to depositing onto trays Complete line sold with numerous accessories. Additional information and video available upon request.

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day Laedpfx Alez Hvmhjyeh - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Lodpfx Alezgayusyjah Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a window manufacturing system, UC Matic 15, from Weinig, consisting of the following main components: - Infeed mechanism - CNC machining center Unirex 2000 - CNC end machining system Unitec 15 Lasdpfjx Sqxhex Alyjh - CNC length profiling machine Unicontrol 12 - Automatic double-part turning and return system - Outfeed buffer The system is designed as a continuous manufacturing system for window and profile processing and enables efficient and flexible production. The machines will be disassembled by a specialized company. The costs for this will be disclosed and are to be borne by the buyer.

Year of construction: 1990, condition: used, LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete used technological line for the production of ceramic products, consisting mainly of HANDLE and KELLER equipment. Complete production line price: EUR 400.000 net, EXW, negotiable. To facilitate a quick sale, we also offer: • the complete production line, • individual production sections, • individual machines and equipment. Prices for individual machines are available upon request. Reasonable offers will be considered. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. The line consists of the following machines and equipment: 1. Raw material pre-processing section Lodpfx Aley Nzproysah • HANDLE R469 edge runner, year of manufacture 1955 • AGW 1065/1085 roller crusher, year of manufacture 1963 • WF 1080A roller crusher, year of manufacture 2005 • Belt conveyors – 4 units • Control cabinet 2. Forming section • HANDLE MDVG 920B mixer, year of manufacture 1990 • HANDLE PZG 56A/50 extrusion press, year of manufacture 1990 • KELLER type 4155 cutter, year of manufacture 1990 • Belt conveyors – 4 units • Control cabinet The equipment is characterized by robust construction, durability and straightforward maintenance. The production line was in continuous operation until the end of 2025 and is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Please specify in your inquiry whether you are interested in the complete line, a production section or a particular machine. Additional technical information, photographs and individual prices are available upon request.

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Laodpj Abz D Ijfx Alyoh Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Lajdpfx Alozyv Nrsyjh Features: * Manufacturer: KönIG * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Machine can be viewed and tested by appointment. Photos, videos, and additional technical information available upon request. Photos taken before cleaning.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced Laodpfx Aey St U Sjlyoh • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: used, Type Production Line Radiator production line Further information can be found in the attached PDF document. Lajdpfx Aozpbl Delyoh Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The Mécan'Outil TGV/S automated production line is designed for the assembly of roller shutter casings made from PVC and aluminum profiles. The machine was delivered to a production facility in 2021. The unit is in very good technical and visual condition, making it an excellent investment for companies involved in the production of roller shutter systems. Price: 85,000 EUR (negotiable) Lsdpfx Alsz E Nzcsyeah Detailed technical specifications are available in the attachments. Please contact us for further information and to arrange a viewing of the machine. This is a fully equipped production line that can quickly begin operation in a new facility. Highly recommended.

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station Laodpfoxzy N Ssx Alyjh - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.