Used Boa for sale (10)

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, pressing force: 90 t, bale weight: 500 kg, filling opening width: 926 mm, filling opening length: 1,620 mm, bale length: 1,300 mm, total height: 1,100 mm, total length: 720 mm, input voltage: 400 V, overall weight: 25,000 kg, noise level: 85 dB, pressure: 280 bar, power: 55 kW (74.78 HP), input frequency: 50 Hz, Refurbished BOA baler type 2100 including BOA conveyor belt. Machine is quickly available and is currently in our production hall in Almelo. The machine is very suitable for pressing paper, plastic or other waste materials. Technical data BOA 2100: Drive: 55 kW Press force: 90 tons Cfg0U7Ih Bale dimensions: 1100 x 720 mm Bale weight: approx. 500 kg (depending on material) Number of tie-off wires: 4 vertical Gelhccqevrzyqjtobl Technical data conveyor belt type 1500 KTH HS 32° 3000x8900: Horizontal length: 3,000 mm Ramp section length: 8,900 mm Drive: 2.2 kW / 400 V / 50 Hz Belt width: 1,500 mm Effective width: 1,425 mm

Condition: excellent (used), operating hours: 2,658 h, Functionality: fully functional, pressing force: 71 t, bale weight: 600 kg, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale height: 720 mm, bale width: 1,100 mm, oil tank capacity: 1,250 l, net weight: 29,000 kg, nominal current: 200 A, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Gbolhceu Thcvecqtel

Condition: like new (used), Year of construction: 2007, operating hours: 8,590 h, machine/vehicle number: V300397 - 10, Machine type : BOA Continette II Machine number : V300397 - 10 Norm :according CE Machinery Directive and AS 3000 Surface treatment : RAL 5015 Voltage : 240-415 Volt / 50 Hz E-motor hydraulic pump : 22 kW Protection class : IP 55 Insulation class : F Gjlhoihpgaoccqtsbl Total weight : ± 9000 kg Main dimensions (lxwxh) : 6415x2665x3034 Channel dimensions (lxwxh) : 2030x1000x720 Filling hopper dimensions (lxw): 1200x730 Bale dimensions (lxwxh) : variable*800*730 Pressure force (max. 280 bar) : 882 kN Specific pressure : 43 ton Contents hydraulic aggregate : 800 litre Hydraulic oil specification : Shell Tellus TD 46 Max. pressure : 280 bar Number of cylinders : 3 Hydromat type (vertical) : H 160-4 Number of binding wires : 4 PLC : Siemens Simatic CPU S7 Operation terminal : Touch screen Siemens Sound-pressure level : 75-86 dB(A) 6th of July was baler exchanged and not used Spare parts: wire lances, twist fingers, hydraulic valves, ram hydraulic cylinder, hydraulic pump, PLC modules, touch screen

Condition: excellent (used), Year of construction: 1991, Baler BOA 45 K Baler BOA 45 K 1 Description, Technical data baler: Manufacturer BOA Type 45 K Year of construction 1991/ 2013 completely overhauled and renewed the PLC Press power main press 70 tons Feed channel 1,500 x 1,000 mm Volume press space 1,7 m³ Theoretic cycle time 18 seconds Bale size 700 x 1,150 mm, length variable Driving motor 2 x 18,5 kW Connected load 60 kW Tying system 4-fold vertical, 2-fold horizontal, fully automatic Throughput rate 6 up to 10 tons/hour, depends on material Bale weight 500 up to 600 kg, depends on material PLC Unitronics EX-D16A3-T016 Volume hydraulic oil tank 800 l Transport dimensions only baler 9,800 x 2,250 x 3,200 mm (l x w x h) Machine weight baler approx. 18 tons Condition: The press was completely overhauled in 2013, provided with a new PLC and is in a good condition. Comments: Gjlhccsqhnw Aoqtebl Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: C20 -Width: 120 mm -Nominal pressure: PN16 Gbolhccqod I I H Eotsl -Dimensions: 120/106/H207 mm -Weight: 3.7 kg

Condition: like new (used), Vibrating bar screens / Bar sizer, Indicated below: Manufacturer - Type - Deck Size - 2 Pcs. Mogensen VX 2078 / 2.000 x 6.000mm - BOA KS 1,5 / 2,5 x 1 / 1.500 x 2.500mm - IFE SR 1250 x 3510 FSV / 1.250 x 3.510mm Golhccqjggfk Ajtobl - Jöst / 600 x 2.000mm

Condition: reconditioned (used), Year of construction: 2005, Functionality: fully functional, pressing force: 90 t, bale weight: 600 kg, filling opening width: 1,620 mm, filling opening length: 972 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 31,000 kg, noise level: 85 dB, pressure: 300 bar, power: 175 kW (237.93 HP), BOA baler with double pre-press valves available in a fully overhauled condition. The machine is located in our workshop in Almelo and can be viewed by appointment. A matching conveyor belt (new) can be produced if necessary. The machine is equipped with a so-called refu-ram. This is perfect for pressing materials such as plastic bottles and/or shredded RDF. Technical data: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Gjlhcev Ifagocqtsbl Bale weight: approx. 600 kg (depending on material) Number of tie-off wires: 5 vertical

Condition: like new (used), Manufacturer: BOA Type: KS 1,5 x 2,5 x 1 Size: 1.500 mm x 2.500 mm Electrical Motor: 11 kW/6 Mach. No.: OR 327 Year of manufacture: 1990 Springs included. Golhcjg Stwbscqtjbl Can be sandblasted and painted.

Condition: used, Year of construction: 1996, pressing force: 1,300 t, bale weight: 750 kg, filling opening width: 926 mm, filling opening length: 1,920 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 28,000 kg, power: 110 kW (149.56 HP), cylinder stroke: 2,300 mm, Machine is currently disconnected. The machine is in working condition, but could certainly use some attention. The machine is currently running on one pump. We can offer a replacement of the second pump. We can offer parts, service and installation separately. The machine is currently in Greece. Gelhcevrfcvscqtjbl

Condition: used, Year of construction: 1980, pressing force: 100 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,625 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 28,000 kg, power: 825 kW (1,121.69 HP), cylinder stroke: 2,300 mm, Machine has always been used as a backup for a larger machine. Machine is currently disconnected. The machine is in working condition, but could definitely use some attention. The machine leaks a little oil at some valves. We can offer parts, service and installation separately. Gjlhccqovmqm Njtebl The machine is currently in Greece.