Used Room Equipment for sale (41,909)

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Colhcey Akpzocqnehc Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Chslhezimbkeccqnjc Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse. Cheljzut Axshccqnec

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Chslhccqezn N Nnjnjc

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Chelhccqszbyn Njnjc Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, - Cooking chamber dimensions: 1200x2000 mm - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment). Cholhcswxmn Sscqnsc

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Chelhccqeza T Slsnoc Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Cjlhcozbynpscqnohc Location: Hamburg A video of the machine is available!

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Choljy S Td Hehccqnjc

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit Chjlhccjyalqyeqnoc 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. Colhccjzvxlnoqnshc The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.

Condition: new, functionality: fully functional, power: 377 kW (512.58 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. Fullstar-60 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing Fullstar-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-90 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. TECHNICAL SPECIFICATIONS: - Model: Fullstar-90 - Production Capacity: 120-180 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 900x650mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1000 mm - Maximum Feeding Size: 600 mm - Vibrating Screen Size and Deck: 1st Chassis: 1700x4500 mm : 2nd Chassis: 1550x4000 mm(Grizzly) ¬- Screw Washer Size: 600x5000 mm (Twins Helix) - Total Motor Power: 377 Kw - Generator (optional): 450 kvA - Plant Dimensions: 1st Chassis: 18960 x 4070 x 4650mm : 2nd Chassis: 15500 x 4650 x 4400mm FULLSTAR-90 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Chelhezvfk Deccqnjc

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, total length: 40,000 mm, total width: 6,000 mm, Equipment: documentation/manual, Automated nickel–chrome electroplating line for sale in Türkiye. The line was completely refurbished in 2025 and was operational before dismantling. All equipment is now dismantled and ready for loading. Chslhccqjz Ei Ngenoc The line has a reported coating surface area of 400–450 dm², a maximum rack load of 1,000 kg and a production capacity of 8,000 dm² per hour. Its installed footprint is 40 × 6 m (240 m²), with reported electricity consumption of 80 kWh per operating hour. The sale includes process tanks, filters, rectifiers, a hot-water boiler, a purified-water system and dosing pumps. The equipment list includes six 1,300 A nickel rectifiers, two 4,500 A chrome rectifiers and one 3,000 A rectifier for electrolytic degreasing. The buyer is responsible for transport and commissioning. A detailed equipment list and presentation are available upon request.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Chjlhccsyrrpyoqnjc Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is dismantled.

Condition: new, functionality: fully functional, Year of construction: 2015, machine/vehicle number: Masa HDP-800, Silicate brick production equipment Masa GmbH HDP-800 Chelhccjx Aza Uoqnjc

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. Cjlhoyhc Rgjccqnohc It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: new, functionality: fully functional, power: 560 kW (761.39 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE New Generation FULLSTAR Series Mobile Crushing, Screening and Washing Plants are the most preferred machines in recent years thanks to easy and cost free installation. The first crushing process is performed with Primery Jaw Crusher, we can design with secondary impact crusher or cone crusher for second crushing stage according to the requirements of our customers. FULLSTAR 110 plant has been projected for the first time in the world by Fabo and provides crushing, screening and as well as to wash 0-5 mm sand at the same time on a single chassis. Our FULLSTAR model operates in closed Crushing circuit system and allows user to obtain 4 different final fractions up to 300 T / S capacity. We are manufacturing FULLSTAR-90 and 110 models which has 3 functions at the same time by trailed-type 2 chassis with its own tires. FABO FULLSTAR-110 is a mobile type plant which perform crushing, washing and screening operations at the same time. This type of plant is very efficient as it is produced on a single chassis, which reduces both plant operation area and manufacture cost. Cslhccozv Tamoqnehc TECHNICAL SPECIFICATIONS: - Model: FULLSTAR-110 - Production Capacity: 200-300 Tons Per Hour - 1st Crusher: Primary Jaw Crusher – 1100x850mm - 2nd Crusher: Secondary Impact Crusher – Rotor Ø1250x1500 mm - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 1st Chassis: 2200x5500 mm : 2nd Chassis: 1700x4500 mm(Grizzly) ¬- Screw Washer Size: 800x8000 mm (Twins Helix) - Total Motor Power: 560 Kw - Generator (optional): 700 kvA - Plant Dimensions: 1st Chassis: 22000 x 4700 x 4700mm : 2nd Chassis: 17500 x 4650 x 4600mm FULLSTAR-110 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder(Bypass) • Primary Jaw Crusher • Secondary Impact Crusher • High Stroke Type Vibrating Screen • Screw Sand Washer (Single Helix) • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: unexamined, Used BARMAG / EMS-Inventa AG extrusion and spinning-related industrial equipment available in Thailand. The equipment is currently installed at an existing industrial facility in Thailand. The available equipment includes BARMAG and EMS-Inventa AG machinery together with various auxiliary and process equipment, including: - Extrusion-related machinery - Spinning-related production equipment - Process vessels and tanks - Feeding / dosing equipment - Pumps and auxiliary equipment - Motors and gearboxes - Heating and cooling systems - Electrical control cabinets - Process piping and auxiliary systems The equipment is offered as used machinery. The exact models, manufacturing years, technical specifications, completeness and current operating condition are subject to verification. The equipment may be available as a complete production line, individual machines or selected components, depending on the buyer's requirements. Additional photographs, nameplate information and technical details can be provided to interested buyers. The equipment is located in Thailand and can be inspected by appointment. Chelhsz Hzuqsccqnjc Dismantling and transportation are to be arranged with the buyer.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Cheloxlt Hfjhccqnoc Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. This system was previously used to pack donuts and was in production for approximately 9 months in total. Cjlhcsyrup Ascqnehc Manufacturer - Kempner.

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service performed by Asco was in December 2016 at 12,032 hours. After the service, the system only operated for an additional 603 hours because investment was made in a brand new production line. The machine has a total of 12,635 operating hours (12,032 hours since the last service + 603 additional hours). The machines come from a large industrial factory that changed its production setup and switched to a different equipment brand. This change is the reason these machines were taken out of production and are now available for sale. The machines are used, fully functional, and in good working condition. Chelhcoy R I Uqecqnec The main technical specifications, year of manufacture, and operating hours are listed in the advertisement. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, (Please tell us your offer price) Sale only within Europe, incl. Turkey Cslhccjz Hxgdoqnjhc Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 612200, total length: 11,700 mm, total height: 6,200 mm, total width: 3,130 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 2,900 mm, product height (min.): 500 mm, product length (max.): 2,400 mm, product width (max.): 1,200 mm, input voltage: 400 V, compressed air connection: 6 bar, working height: 3,200 mm, input frequency: 50 Hz, transport length: 3,900 mm, throughput speed: 32 mm/s, air demand: 6 m³/h, workpiece weight (max.): 1,500 kg, Equipment: documentation/manual, safety light barrier, Brand new, never used, packaged by the manufacturer, delivered and stored in a temperature-controlled hall in Hungary. Choloyrnr Rjhccqnec

Year of construction: 2007, condition: used, functionality: fully functional, The ELDAN FG952 is an industrial, high-speed, single-shaft granulator designed to further reduce the size of materials after primary shredding, down to a specified granule size. The material is fed into the cutting chamber, where a rotating rotor with moving blades interacts with stationary blades. The granulated material passes through a replaceable screen, allowing for the selection of the desired final fraction size. The unit features an adjustable blade gap, multiple blade sharpening options, easy blade replacement, and a hydraulic opening for the feed hopper, which facilitates access to the cutting chamber during maintenance. Replaceable wear parts and screens with different hole sizes are used. Electric motor power: 75 kW / approximately 100 HP Rotor length: 950 mm Rotor speed: 475 rpm Moving ("flying") blades: 12 pcs. Stationary blades: 4 pcs. Capacity up to 3,500 kg/h Approximate weight 4,400 kg Chjlhjz Dgrvoccqnsc Length: 1,940 mm Width: 1,960 mm Height: 2,800 mm Motor rated speed: 1,480 rpm Standard electrical grid: 3 phases, 400 V, 50 Hz The FG952 can be used to granulate various materials, including: tires and rubber; electrical and other cables; aluminum scrap; plastics; various secondary raw materials after primary shredding.

Condition: excellent (used), Year of construction: 2022, KIPPAX Printtech 3625-LEDFS Chelhccqez H T Ehenec Used for a couple of jobs per week since Dec 2022 Excellent condition