Used Board for sale (3,863)

Condition: new, Year of construction: 2025, functionality: fully functional, The Ceetec P40 is the smallest machine in the brush coater line and is particularly suitable for use in smaller craft workshops, painting studios, carpenter’s shops, and builders' merchants. It enables fast and consistent coating of both straight and profiled elements. Its straightforward design makes the device exceptionally easy to operate. This model is especially popular among manufacturers of timber houses. Its compact dimensions make it easy to transport the unit to the construction site. Thanks to the use of conical brush heads, optimal surface finish quality and high repeatability of results are ensured. Dkjdpfx Asxp E A Tjkzop The machine is designed for water-based products – it is not suitable for use in ATEX zones. Accessories Optional additional equipment is available, including roller tables, bag filters of varying thickness, and horsehair brushes. TECHNICAL DATA: Maximum cross-section of workpieces: 25 x 175 mm or 40 x 100 mm Min. workpiece length: 800 mm Power supply: 3 x 400 V + PE, IP65 rating Power: 0.37 kW Throughput: up to 1,400 m/h Machine weight: 115 kg ADVANTAGES OF THE CEETEC P40: Small, handy, wheeled model Perfect for coating facade boards, decking boards, and soffit boards Quick adjustment of working width and easy paint changeover Fast payback time Fitted with rubberised transport wheels

Condition: used, functionality: fully functional, Julabo RD Keypad and Presto Chiller Digital Controller and board. Dedpfet Dag Njx Akzokp Good working condition. Please check out our other listings as well.

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Dsdjyh U I Ijpfx Akzjkp Machine length: 7.50 m The entire system corresponds to the foto

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. Dsdpenygvrsfx Akzokp 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection Dedpfx Asw Av Ivokzskp The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: excellent (used), Complete board sizing line consisting of roller conveyors, destacking device, transport table, Haist saw, Weinig Hydromat 22 AL four-sided planer with tooling, and a stacker. Dksdpfjwz Id Tex Akzep

Condition: good (used), 3 cutting units Dkjdpfsxvmq Ssx Akzop Saw blade diameter: 550 mm Max spacing between outermost blades: 10 m Motors: 3 x 3 kW 2-stage feed Power supply: 400 V

Condition: used, functionality: unexamined, Ferwood code: RU0000341 - Manufacturer code: 2-083-01-5202 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Dodpfx Ajwtf A Rjkzekp

Condition: used, functionality: unexamined, Ferwood code: RU0011613 - Manufacturer code: 3-012-05-2040 - Condition: Used - Functionality: Untested - If interested, we offer refurbishment service, please contact us. Djdpfx Ajwtgu Iekzjkp

Condition: used, functionality: unexamined, Ferwood Code: RU0000299 - Manufacturer Code: 2-083-01-8621 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dkedpfx Akewrzu Tjzjp

Condition: used, functionality: unexamined, Ferwood code: RU0000296 - Manufacturer code: 2-083-01-5423 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service. Please contact us. Djdpfewtfzmsx Akzekp

Condition: used, functionality: unexamined, Ferwood code: RU0002807 - Manufacturer code: 2-083-02-8130 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Dsdpfswtf D Usx Akzokp

Condition: used, functionality: unexamined, Ferwood code: RU0002879 - Manufacturer code: 2-083-01-5081 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment service, please contact us. Dsdpowtf Iyofx Akzekp

Condition: used, functionality: unexamined, Ferwood Code: RU0007164 - Manufacturer Code: 4-086-05-0308 - Condition: Used - Functionality: Not tested - If interested, we offer refurbishment service, contact us. Dsdpfx Ajwtf Sfskzjkp

Condition: used, functionality: unexamined, Ferwood Code: RU0007165 - Manufacturer Code: 2-083-01-5410 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dodpsv Efu Eefx Akzekp

Condition: used, functionality: unexamined, Ferwood Code: RU0007162 - Manufacturer Code: 2-083-02-7400 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Djdpswp Nr Uofx Akzekp

Condition: used, functionality: unexamined, Ferwood code: RU0007172 – Manufacturer code: 2-083-01-5101 – Condition: Used – Functionality: Not tested – If interested, we offer an overhaul service; please contact us. Dsdowtf Utjpfx Akzjkp

Condition: used, functionality: unexamined, Ferwood code: RU0007166 - Manufacturer code: 2-083-01-5004 - Condition: Used - Functionality: Not tested - If you are interested, we offer an overhaul service. Please contact us. Djdpswtf Tcefx Akzekp

Condition: used, functionality: unexamined, Ferwood code: RU0008978 – Manufacturer code: 2-083-01-5522 – Condition: Used – Functionality: Not tested – If interested, we offer refurbishment services; please contact us. Dodpfx Ajwtf Uyokzekp

Condition: used, functionality: unexamined, Ferwood code: RU0011607 - Manufacturer code: 2-083-03-0097 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Dodpfx Ajwtgpljkzokp

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system - Automatic removal of sticks between board layers Djdpfxsyk Tlgj Akzokp The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.

Condition: used, Board sorting / sorting boxes / track wagon sorting consisting of: - Board elevator - Conveyor belt - Spiral roller conveyor - Manual sorting boxes (10 track wagons) Dedpfx Akexvz N Ajzskp

Year of construction: 2003, condition: reconditioned (used), longitudinal saw for cutting boards 4 meters main engine 400V, 7.5kW - blade feed motor 400V, 2.2 kW - extending the pneumatic saw - working pressure 6bar - cutting length 4020 mm Dkodpfx Akshbp T Sjzsp - cutting height approx. 170mm - machine length 5.5 m - machine width 1.6 m

Condition: used, Stromab Mitre Saw for Boards up to 250 mm, Height 100 mm Dkodpfxjrnbnke Akzjp

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger Dodpfxogwqk Sj Akzekp One single blade horisontal resaw Conveyors system between the machines included.