Used Boring Bar for sale (24,737)

Condition: used, Year of construction: 2006, functionality: unexamined, overall weight: 4,535 kg, Technical Data (EN) Manufacturer: CompAir Drucklufttechnik GmbH Model / Type: L160RS-13A Year of Manufacture: 2006 Identification No.: 349031/0163 Total Weight: 4535 kg Compression Medium: Air Voltage / Phase / Frequency: 400 V / 3 Ph / 50 Hz Volume Flow Rate: 20.7 m³/min Stage Pressures: 1st stage: 13 bar Suction Pressure: 1.0 bar Psdpfxsxy Sndj Ab Ijgw Full Load Current: 309 A Motor Speed: 1500 rpm Installed Motor Capacity: 160 kW

Condition: used, functionality: unexamined, workpiece weight (max.): 5,000 kg, Two-column coordinate boring machine CNC Manufacturer: Mikromat WMW Type: CBKoZ 1400x2240/2 Control: Siemens 840D (installed approx. 1997) Podpfxoxyq Hxj Ab Iogw Space required: 7000 x 6500 x 5300 mm (LxWxH) Weight: 22,500 kg incl. - tool holders shown - extensive documentation. For further information, see attachments. The machine can be tested/demonstrated on site under power. Freight basis: From location, without dismantling The buyer must dismantle and load the machine himself. A 10-ton bridge crane is available for this purpose, which was also used to assemble the machine at the time. Further assistance and the use of a forklift truck may be possible by arrangement. All information without guarantee. Subject to prior sale. The object of purchase is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duties by the seller or for any injury to life, body or health.

Condition: used, empty load weight: 5,770 kg, maximum load weight: 12,230 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/1999, loading space length: 7,600 mm, loading space width: 2,470 mm, loading space height: 2,250 mm, total length: 2,550 mm, total width: 3,680 mm, suspension: air, tire size: 385 / 65 R 22,5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: tail-lift, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, air-suspended, lashing eyes, low-coupled, swivel drop sides, aluminum tail lift, upright Body: Böse beverage box with swivel drop sides BÄR LBW 2000kg lifting load aluminum upright, load securing, for suitable vehicle see - 69189 - ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pedpfx Absqbr Ncs Iegw - .

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm Pedpfx Aoul Eg Dob Iogw metric thread M 33 Messing metric thread M 16 Gußeisen metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm weight 730 kg

Condition: good (used), Year of construction: 2021, functionality: fully functional, With the stretchMASTER 6000, you can straighten steel bars up to 6 meters in length. The processable cross-sections are: round steel 6 – 30 mm, flat steel 4 – 12 mm as well as 12 – 60 mm, and square steel 8 – 25 mm. Podpfx Ajxyxkreb Ijgw The machine can be inspected by appointment. Delivery is available at an additional charge.

Condition: good (used), Type / Model: UPA5 P50 Mounting: SK40 Setting accuracy: 0.01 mm Accessories: see pictures Equipment: with 2 feeds, rapid return, manual drive Packaging: Original 365 x 315 x 1700 mm Podpfeva Dypox Ab Isgw Condition: good Application: Lid FP1, FP2 and similar machines

Condition: used, Year of construction: 2000, functionality: unexamined, volume flow: 19.6 m³/h, Technical Data Manufacturer: BOGE Kompressoren Model: S 220 Year of Manufacture: 2000 Machine No.: 38295 Free Air Delivery: 19.60 m³/min Pgedpfx Aexy Sk Sjb Iow Final Compression Pressure: 15 bar Motor Speed: 1500 rpm Motor Power: 160 + 0.75 kW Control System: BOGE Ratiotronic

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, bar length: 2,100 mm, bar diameter (max.): 80 mm, Diameter mm 8-80 Bar length mm 700-2100 Loading system side elevator with chain Bar capacity 7 OVERALL DIMENSIONS Pgsdpfxsvkhhxe Ab Isw Length mm 3350 Width mm 877.5

Condition: excellent (used), Year of construction: 2020, SIEMENS 840D SL control unit MAIN SPINDLE Speed 5.000 1/min Spindle bore 65 mm COUNTER SPINDLE Speed 7,000 1/min Spindle bore 42 mm 2 REVOVER Travel X1, X2 180mm Travel Y1 ±45mm Travel Z1= 704mm, Z2= 620mm 12 stations per revover Psdpfxsvi Nizj Ab Isgw all driven Chip conveyor Bar loading magazine TOP X-FILES XFS/7.3

Condition: used, Year of construction: 2007, table length 3000 mm table width 2000 mm table load 25 t longitudinal adjustment 1500 mm Pgodpfxsw Rrbte Ab Iew rapid traverse 6 m/min total power requirement 12 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 5 x 2,3 x 1,2 m Table has hydrostatic guideways and SPS (Siemens) control.

Condition: good (used), LNS EXPRESS 332 installed on TRAUB TNK 36 Very good condition Pgsdpfx Aboxxh Hto Iew

Condition: good (used), mileage: 3,33,714 km, power: 248 kW (337.19 HP), first registration: 01/2013, fuel type: diesel, color: blue, axle configuration: 8x2, tire size: 315/80R22,5, fuel: diesel, wheelbase: 4,520 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: other, loading space width: 2,430 mm, loading space length: 9,950 mm, loading space height: 2,180 mm, Year of construction: 2013, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (recording device) - Fixed - Short cab - Tail lift - Central locking Number of axles: 4, Configuration: 8x2, Unladen weight: 13,300 kg, Gross weight: 35,000 kg, Total fuel tank capacity: 300 litres, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cabin type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Colour: Blue, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Speed limiter, Seat heating, Blind spot sensor, Engine power: 248 kW (333 Hp), Fuel: Diesel, Euro: 5, Transmission type: I-Shift, Gearbox make: Volvo, Speed limiter, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat upholstery: Seat cover, Seat adjustment: Manual, Tail lift, Tail lift version: Rear tailgate, Tail lift capacity: 2,000 kg, Tail lift manufacturer: B.A.R. Cargolift, Tail lift material: Aluminium, Tail lift size: 230 x 249, Spare wheel, Spare wheel tread: 7 % Transmission Gearbox: VOL, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering, Tyre tread left: 8 mm, Tyre tread right: 7 mm, Suspension: leaf suspension Axle 2: Steering, Tyre tread left: 7 mm, Tyre tread right: 6 mm, Suspension: leaf suspension Axle 3: Twin tyres, Tyre tread left inner: 8 mm, Tyre tread left outer: 7 mm, Tyre tread right inner: 6 mm, Tyre tread right outer: 10 mm, Suspension: air suspension Axle 4: Lift axle, Steering, Tyre tread left: 7 mm, Tyre tread right: 9 mm, Suspension: air suspension Dimensions Dimensions (L x W x H): 1235 x 255 x 380 cm Weights Unladen weight: 13,300 kg Payload: 21,700 kg Gross vehicle weight: 35,000 kg Functional Tail lift: B.A.R. Cargolift, rear tailgate, 2,000 kg Loading height: 121 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, trailers. Our range includes all European makes, model years and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good pricing • Correct business conduct • Multilingual team • We understand our customers • Import and transport support • (Export) registration plates handled quickly • Expert technical services • The assurance of “recognizable quality” Podjwtl Iyepfx Ab Iogw • And more… Please visit our website for special offers and full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2017, operating hours: 19,782 h, functionality: unexamined, machine/vehicle number: 3869002, overall weight: 4,840 kg, motor manufacturer: ABB, volume flow: 36 m³/h, Equipment: type plate available, For sale: ALUP Kompressoren Allegro 200DW Technical Data: Manufacturer: ALUP Kompressoren GmbH Model: Allegro 200 DW Type: Industrial screw air compressor Pressure: 8 bar Capacity: 36 m³/min Voltage: 400 V Frequency: 55 Hz Motor Power: 200 kW Motor Speed: 2983 rpm Serial Number: TRD128935 Production Date: 09/2017 Weight: 4840 kg Noise Level: 79 dB(A) Pgjdpsxy Sagofx Ab Iow Made in Germany

Condition: used, Year of construction: 2014, functionality: fully functional, Cnc FANUC Series 31i – MODEL B Max. diam. workable from bar mm 51 Max. workable length mm 230 MAIN SPINDLE Max. rotation speed rpm 5000 ASA spindle nose 5" Spindle hole mm 59.5 Internal diameter of bearings mm 90 Motor power kW 15 COUNTER-HEAD Max. rotation speed rpm 5000 ASA spindle nose 5" Spindle hole mm 55 Useful through hole mm 45 Internal diameter of bearings mm 90 Motor power kW 11 Pjdpewari Rsfx Ab Ijgw UPPER LEFT TURRET 1 UPPER RIGHT TURRET 2 LOWER TURRET 3 Number of positions 12 Rotation speed rpm 4,000 Motor power Kw 3.7 Rotation time (1 pos) sec 0.15 Max. stroke Y axis mm 90(-40/+50) COOLANT Tank capacity l 450 Total power of electric pumps kW 4.8 DIMENSIONS - WEIGHT Overall dimensions with chip evacuator mm 5033 x 2100 x 2458 h Weight with conveyor kg 8200

Condition: good (used), Two Swiss cylinder boring machines: 1. BH55 1049 (55–110 mm) (Price: €2,590) 2. BH35 1017 (35–58 mm) (Price: €2,590) Pgjdpfxoxvq A Ss Ab Isw The listed price is per unit, not for both together.

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Pgsdpfxsxdl Ras Ab Ijw Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Year of construction: 2015, condition: used, Serial number: TMG15URExxxx Please contact ATS Norway for more information Please provide reference number upon request: 21725 Specifications: Pedjxu A Htepfx Ab Iegw 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Boom 1: Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: 2015 Atlas Copco Boomer MC2 Tunnelborerigg.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, elumatec 4-axis profile machining center with 6,400 mm working length for flexible and efficient processing of aluminum and thin-walled steel profiles. Description: - Short tool change times thanks to a traveling tool changer - Fast positioning of the machining unit at up to 63 m/min due to dynamic servo drives - Modern 4-axis control for spatial machining operations - No axis referencing required thanks to the use of absolute encoder systems - Gentle on material surfaces thanks to processing on stationary profiles - Collision avoidance through automatic clamp detection and positioning - Certified, drive-integrated safety functions: - STO = Safe Torque Off - SS2 = Safe Stop 2 - SLS = Safely Limited Speed - Power-torque milling motor with closed-loop speed control for short acceleration and braking times of the spindle - Energy recovery via DC link coupling of the axis drives with regenerative feedback and buffering of the drive braking energy - Green-Line cooling unit with reduced energy consumption - Thread cutting without compensation chuck - Operator terminal with Windows operating system, large 15" flat screen - Connections: 2 x USB, network with RJ45 10/100 MBit - Easy and convenient programming via eluCam at the operator terminal, possible even during machining - Remote maintenance via TCP/IP with existing internet access Pgedpfowyvcbjx Ab Iow - 2-circuit clamping system Technical Data: Travel and machining ranges: - X-axis [mm]: up to 6,760 / 6,400 - Y-axis [mm]: up to 845 / 645 - Z-axis [mm]: up to 620 / 250 - Swivel range A-axis: -90° 0° +90° Travel speeds: - X-/Y-/Z-axis [m/min]: 63/60/60 - A-axis [°/sec]: 144 Milling spindle: - Speed [rpm]: up to 24,000 - Power [kW]: 11 - Cooling: air - Tool holder: HSK-F 63 Tool changer system: - 8 tool positions - Tool length: max. 180mm (tool + holder) - Balance quality per DIN 1940: minimum G2.5 Machine equipment: - Automatic tool changer (without tool holders) - 8 horizontal pneumatic material clamping units - Cooling unit for control cabinet - 2-circuit clamping system - 2 pneumatic material stops - Uninterruptible power supply (UPS) for PC - Central lubrication - Minimum quantity lubrication for the tools - Hand-held control unit with potentiometer - Central chip tray in the machine bed - 1 front safety light curtain system - Safety fence left and right - Depth gauge - incl. length measurement for profile bars - incl. various used tool holders and cutters

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Pedpsdf S Rzefx Ab Iegw Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), Blum hardware hinge drill Minipress Number of drills 5 Mounting of drills with quick couplers Motor power 0,75kw Pneumatic pressure Pneumatic stroke of the aggregate Pgedpfxjuz Tc He Ab Ijw Maximum thickness of workpiece material 40mm

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm Pjdpfjru Rfhox Ab Iogw bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: good (used), mileage: 2,62,114 km, power: 162 kW (220.26 HP), first registration: 08/2021, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 265/70R17,5, fuel: diesel, wheelbase: 4,200 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,330 mm, loading space length: 5,660 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, traction control, = Additional Options and Equipment = - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Short cab - Power take-off (PTO) - Pump - Winch - Central locking = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,155 kg, Gross weight: 12,000 kg, Total fuel tank capacity: 180 liters, Number of differential locks: 1, Winch, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Red, Heated mirrors, Reversing camera, Lighting type: LED lamp, Speed limiter, Lane departure warning, Climate control, Heated seats, Bluetooth, Flashing lights, Engine power: 162 kW (217 HP), Fuel: Diesel, Euro standard: Euro 6, Transmission type: AS-Tronic, Gearbox: ZF, Speed limiter, Gears: 6, Power steering, ABS, ASR, Power take-off, PTO type: 1, Starter battery, Pump, Central locking, Seat configuration: 1+2, Seat covering: fabric, Seat adjustment: manual = Further Information = Transmission Transmission: ZF, 6-speed, automatic Axle Configuration Tire size: 265/70R17.5 Brakes: Disc brakes Axle 1: Steered; Tire tread left: 5 mm; Tire tread right: 6 mm; Suspension: leaf spring Axle 2: Dual tires; Left inner tire tread: 6 mm; Left outer tire tread: 7 mm; Right inner tire tread: 6 mm; Right outer tire tread: 6 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 840 x 255 x 270 cm Weights Unladen weight: 8,155 kg Payload: 3,845 kg Gross vehicle weight: 12,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 4 Financial Information Leasing price: €1,137 per month (default, 72 months); Please ask for further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealerships for used vehicles. You can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various years and price categories. Why buy from Kleyn Trucks? Simple! Pjdpfx Abswubxdj Ijgw • Large, rapidly changing selection • Recognizable quality • Competitive prices • Professional business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The safety of 'recognizable quality' • And much more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask us directly about our European warranty package.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 100 W, laser wavelength: 1,070 nm, empty load weight: 1,200 kg, number of axes: 4, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fibre Laser: Power: 100 W Wavelength: 1070 nm Number of axes: 4 MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 160 x 140 x 170 cm Machine weight: 1,200 kg Bar Feeder Model: Iemca Elite 112 / Type: 32LL Bar feeder year of manufacture: 2010 Bar feeder dimensions (L x W x H): 420 x 60 x 140 cm Bar feeder weight: 500 kg Pgodpfsxtmx Djx Ab Iew EQUIPMENT Iemca Elite 112 bar feeder

Condition: good (used), Year of construction: 1995, functionality: fully functional, Approx. year of manufacture 1995 Pedpfx Abexwc A Te Iogw

Condition: excellent (used), DETEL M9 Pneumatic Drilling Machine Pgedpoxnzxbefx Ab Isw Pneumatic feed of the unit Adjustable drilling depth Pneumatic material clamping Capable of vertical and horizontal operation Head with 9 spindles Spindle pitch: 32 mm Spindle motor: 1.1 kW