Used Boring Heads for sale (12,696)

Condition: used, Knife: Z4 Knife type: Strip planer knife Available: 1 117 x 55 x 35 mm Cgsdpfjlf I Nbex Aiaju

Condition: used, Blade 40 x 150 mm Chain width ca. 18-15 mm engine 1,6 kW Codolfdx Rspfx Aiaegu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, The machine is fully functional and operational, in very good technical condition. It is equipped with, for example, an angular head, angle plates, tools, etc. It features a Heidenhain 530 control system. Cgedpfsy Udhbex Aiaeu

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, overall weight: 1,700 kg, Equipment: documentation/manual, Universal machine COMEC RCG 900 for reconditioning cylinder heads, engine blocks, drums, and discs for cars and trucks. Planing width: 320 mm Planing length: 900 mm Maximum working height: 370 mm Maximum table travel: 1200 mm Feed rate: 0.8 - 450 mm/min Maximum brake drum diameter: 1400 mm Head motor: 5.5 Hp Brake machining speeds: 35-70-50-100 rpm Cgedpfey Rffyex Aiaeu Approximate weight with accessories: 1700 kg Dimensions: 2300 x 790 x 1700 mm (h)

Condition: ready for operation (used), Available immediately, ex works: Scharmann boring table Year of manufacture approx. 1985 Table size 1800 x 1600 mm Csdpfx Aijzaqb Reasgu Table load capacity 20 tons Travel distance (X-axis) 1250 mm Electric drive 4 kW Weight 9 tons Price: EUR 8,500.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm Cgjdeyu R Eljpfx Aiasu - maximum welding length: 2600 mm - support arms - PLC controller

Year of construction: 1999, condition: excellent (used), Max. Saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Cedpfx Aoucpqtjiaegu Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor 4000 mm and stops 4400 mm

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Codexf Uytjpfx Aiasgu Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 Cjdjy Sbwzspfx Aiajgu - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Weight: 81 kg Good condition

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads Cgjdpjtqmmdofx Aiaeu - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station Cgsdey A Htpepfx Aiaju

Condition: used, functionality: fully functional, Robust universal milling machine from KNUTH, featuring the proven WF I design. A classic, German-made workshop machine with a milling head, horizontal milling arbour mounting, a heavy cross slide, and smoothly operating mechanics. Includes original tables and controls. Suitable for workshops, model making, training workshops, repair work, and fixture construction. Also ideal for ambitious private users and collectors of high-quality machine tools – the WF series is highly sought after and easy to operate. Technical specifications: Cgedpozabr Tofx Aiaou - Model: WF I - Manufacturer: KNUTH Werkzeugmaschinen GmbH, D-Neumünster - Year of manufacture: 1991 - Power consumption: 3 kW - Voltage: 380 V / 3-phase / 50 Hz - Table: Cross slide with T-slots (verify dimensions on site) - Milling arbour: horizontally mountable - Tool holder: SK / MK (verify on site) - Serial number: 90020 - Weight: approx. 800-1200 kg Collection / Transport: Self-collection with forklift/crane. Loading on site is possible. Shipping via a low-loader can be arranged.

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Cgedpfx Aey Hglaeiasu Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Cedjy Hgkvspfx Aiajgu Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Cgedsygarlopfx Aiaou Z-axis travel: 1600 mm Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.

Condition: ready for operation (used), Year of construction: 2000, Table length: 530 mm Cgjdpfep Dt T Eex Aiaeu Table width: 230 mm Table height: 800 mm Table fixed Drilling length: 200 mm Drilling depth: 150 mm Height adjustment: 200 mm Drill chuck diameter: 0 - 20 mm Drilling speed: 2800 rpm Motor power: 2.2 kW Weight: 160 kg

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Cgjdpfx Aew Hbnvsiaou Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. Cgodeza Smnopfx Aiaju €2,500 (excluding VAT). No delivery; must be picked up at the workshop.

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz Cjdjy Saw Hspfx Aiaegu - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: used, Year of construction: 2025, boring spindle diameter 130 mm taper ISO 50-7388/1 milling spindle diameter 200 mm direct current motor 22 kW 10-1600 U/l rapid traverse der Achsen 6000 m/min z-axis 800 mm y-axis 2100 mm x-axis 3000 mm w-axis 1500 mm Size of table plate 1250 x 1500 mm table movement max. 10000 KG kW im Eilgang 3,5 Cgodsyacn Nopfx Aiaeu

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Manufacturer: CME, Origin Spain Model: FS Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Weight: approx. 300 kg This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Cjdjyf Uqtepfx Aiaegu DE - 44143 Dortmund - Wambel

Condition: excellent (used), 1 used, very well-preserved universal milling head, "HURON" system, with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin Spain Model: VAR 3 - BF, BM, KOMPAKT Technical Data: Spindle mounting: ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Cgodpfoyc Eizex Aiaeu Dimensions (L x W x H): 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special Features: • 2-axis swiveling, "HURON" system • Hydraulic tool clamping • Suitable for retrofitting to conventional, NC or CNC milling machines (e.g. MTE, LAGUN, CORREA, ZAYER, CME, AYCE, SACEM, JUARISTI, UNION, ARSENAL, ...) or any type of boring mill, ... This high-quality milling head was used as a rental milling head and was only employed for repair purposes while the other milling head was being serviced and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: excellent (used), 1 used, very well-maintained universal milling head for retrofitting to conventional, NC, or CNC milling machines or boring mills of any kind, "HURON" system, swivels across 2 axes, every angle adjustable. Spindle taper ISO 50 Reach approx. 360 mm Rated drive power 10 HP Max. speed 1800 rpm Weight approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts/gears are made from case-hardened and tempered chrome-nickel steel • Two rotatable axes for infinitely adjustable angles! "HURON" system • Conical gears are ground according to the "KLINGELNBERG" system • The main spindle rolling bearings are high-precision tapered roller bearings • 1 pull stud for tool retention This high-quality milling head was used as a loaner head and only deployed for repair purposes when the main head was being serviced or overhauled. Siegfried Volz Werkzeugmaschinen Cgodpfxeyc Ei Us Aiaeu Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, JBT International 16 Head Rotary Filler With 2 Mettler Toledo C Series /C3/C35 checkweighers Machine had complete refurbishment by original manufacturer 2020 Please note the items in this lot 30466-369 are simultaneously offered in the combination lot 30466-348 as a complete line. The separte parts of the complete line 30466-348 are offered as individual lots 30466-349 to 30466-374 Cgedpfx Aey Uxz Njiaeu Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2+N7 working days.

Condition: excellent (used), Year of construction: 1985, Drilling depth 750 mm Solid drilling in steel approx. 30 mm Cgedpfoy N Ecpsx Aiaeu Maximum spindle speed 5,700 rpm Clamping table 1280 x 420 mm Cross-slide table Coolant tank Various accessories (drills, bushings)