Used Brandt Kd 56 for sale (99)

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Guodovvkd Tspfx Aa Soa

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Gujdpfovvkfwox Aa Sja Storage location: Nattheim

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Gsdpec Tmygsfx Aa Seua (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2001, Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 - DTR Guodpohcitrsfx Aa Ssa TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm weight 2000 kg

Condition: repair required (used), Year of construction: 1996, Edge banding machine Brandt Optimat KD 69 0 In need of repair, the control system no longer functions properly Without premilling Edge trimming front/rear Corner rounding top/bottom Corner rounding front/rear Scraper top/bottom Polishing top/bottom Guodoylttgepfx Aa Sja

Condition: excellent (used), Gluing machine Guillotine Gujdsttu Riepfx Aa Sea cross-cut saws milling cutter Scraper Polishing machine

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Guedpoxdy Sljfx Aa Soa

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Guodpfeyzm E Nsx Aa Sja Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014

Condition: used, Year of construction: 2016, functionality: fully functional, operating hours: 5,300 h, power: 5 kW (6.80 HP), input voltage: 24 V, input current: 5 A, input frequency: 50 Hz, type of input current: DC, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,100 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 8 m/min, actuation type: mechanical, total height: 1,800 mm, total length: 4,200 mm, total width: 800 mm, overall weight: 1,800 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, BRANDT KDF 210 edge banding machines in good condition for sale. Servicing and repairs have been carried out by certified specialists. Additionally, a glue application unit for different glue colors can be purchased. Gusdpjy Aibvjfx Aa Soa

Condition: used, Year of construction: 2004, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gsdey Abz Ijpfx Aa Soua Yorick Diebels

Condition: excellent (used), machine/vehicle number: 0-261-79-1449, functionality: fully functional, operating hours: 344 h, total height: 1,730 mm, total length: 7,360 mm, total width: 1,270 mm, overall weight: 3,200 kg, Equipment: CE marking, documentation/manual, Single-sided edge banding machine in right-hand configuration, well-equipped and suitable for processing solid wood edges as well as thick PVC edges. Technical highlights: • Edge thickness: 0.4 – 15 mm • Workpiece thickness: 8 – 60 mm • Feed speed: 11 – 20 m/min (continuously adjustable) • Including automatic edge feeding with 800 mm rotating table • Quickmelt glue unit with pre-melter, PU-capable interchangeable glue pot Equipment: • Jointing cutter unit (2 × 2.2 kW) • Pneumatic end trimming unit (adjustable 0–15°) • Pre-milling and flush trimming units • Profile trimming unit for postforming/softforming • Scraper unit + glue joint scraper • Cleaning spray system Gsdjy A Shxspfx Aa Sjua • Polishing units Control: • PC 16 controller with graphical user interface

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit Godpsy Av A Hefx Aa Seua

Condition: used, machine/vehicle number: 008367, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Gedpfxox Swfhj Aa Sjua Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT, Type O KDN 200 Ambition 1200, used, Gjdsh Ak D Uspfx Aa Seua Year of manufacture 2010 Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg The machine has a cleaning part, missing. Price Euro 2.895 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. /Wir sprechen Deutsch. /Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 2600 kg Measurements height 2300 mm Dimensions Gjdpex E Eggjfx Aa Sjua Machine Length 6060 mm This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Gujdpfxjh U Nzpe Aa Soa Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Godjyu If Nspfx Aa Sjua Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Guedpsyy S Adefx Aa Sea Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: excellent (used), Brandt Optimat KDN340 Edge Bander Glue application by roller Tank features exchangeable system (machine is supplied with only one tank) Gujdpfeywwqzjx Aa Sja Pneumatic pre-cut guillotine Pressure rollers End-trimming saws Top/bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45mm Max. edge thickness (in roll): 3mm Feed speed: 10m/min Machine length: 310cm The machine is well-maintained and in very good condition.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DETAILED PHOTOS AND VIDEO AVAILABLE ON DISK, PLEASE CONTACT ME BY SMS AND I WILL SEND THEM. Gedpfoxuu N Hsx Aa Sjua PLEASE DO NOT WRITE VIA OLX, CONTACT BY PHONE OR EMAIL ONLY. TECHNICAL DATA: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: used, in very good condition Edge thickness: 0.4–3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge width: 60 mm Maximum power consumption: 21 kW Machine dimensions: height 2300 mm, depth 1550 mm, length 5800 mm Weight: 2600 kg Connection: [230V/400V] EQUIPMENT: - Electrically controlled infeed fence - Rarely found automatic edge feeder - Pre-milling unit - Glue application unit - Pressure unit - End trimming unit (straight or angled cut) - Top & bottom trimming unit - Corner rounding unit - Radius scraper - Flat scraper - Buffing unit - 3 spray units for anti-adhesive fluids TECHNICAL CONDITION: - Machine is fully operational and in continuous production - Regularly serviced by authorized service center - Ready for immediate operation - Low operating hours LOCATION: Bochnia TRANSPORTATION: collection by the buyer

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Guedpfx Aajyrfh Ns Sja Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: ready for operation (used), Year of construction: 2011, This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information. Additional equipment • Joint trimming unit • Gluing unit • Snipping unit • Pre-milling unit • Shaping trimming unit • Profile scraper blades Guodpsx D N T Esfx Aa Soa • Surface scraper blades • Buffing unit • Grooving unit Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Gsdpfxjythxmj Aa Soua Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2011, Type KDF 220 C Year of manufacture: 2011 Units operated from the display Gluing unit Cross-cut saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-50 mm Feed speed: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg Gsdpfx Ajxc N Hvja Soua €19,990 including VAT, shown separately on the invoice

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Corner Rounding Unit: yes Gsdpfx Aaox Swfbo Sjua Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr